Use the Keysets menu to switch between the various keysets that you have created.
When the eBox Control Center is in the background or not running, the eBox driver checks to see what application is in front then uses the keyset created for that application. If an application has no keyset, then the eBox driver uses a permanent keyset named
Global . Although the Global keyset can be programmed just like keysets for specific applications, it is probably best to leave it blank. Otherwise, you might start your tape machines playing while browsing in Safari :)
Keysets, and any changes you make to them, are stored automatically in the eBox's preference file. There is no need to
Save or Open on a regular basis. If you want to make a copy of your work for backup or to move to another Mac, use Open
Archive and Save As Archive in the File menu. These commands store and retrieve all of your keysets in a single file.
Programming Mode
In programming mode, you click on a button, and its information appears in the Inspector window. Here, you can give the control a name and a set of actions to perform when it is clicked.
31
