advertisement
Preface
Component Kits
10
All kits include the necessary components, ESD wrist strap and hardware (if required), and thermal grease (if required). Do not reuse any hardware unless directed to do so.
Notes Description
Printed Circuit Boards
Gate Interface Board
Precharge Board
Power Interface Board
Main Control Board
T-Comm Board
Switch Mode Power Supply Board
DC Bus Filter Board
Fans and Main Fan Circuit Components
Converter Heatsink Fan
Inverter Heatsink Fan
Capacitor Fan
Power Module Sub-assemblies
Inverter Power Module (IGBT)
Kit Catalog No.
SK-G1-GDB1-F8910
SK-G9-PRE1-V480
1336-PB-SP22C
SK-G9-GDB1-D875
SK-G9-VMCB1-D0
SK-G9-VMCB1-C0
SK-G9-TCOMM
SK-G9-PWRS1-D0
2364-SPP02A
SK-G1-FAN1-F810
SK-G1-FAN1-F10
SK-G1-FAN2-F8910
SK-G1-QOUT1-F910
Converter Power Module (SCR)
SCR Snubber Kit
SK-G1-SCR1-F10
SK-G1-SCRSNUBRB
SK-G1-DCCHOKE1-F10
Drive requires three kits.
For AC input only
(2)
For DC input only
(3)
875 A
115V I/O
24V I/O
Includes fan and fan enclosure
Includes fan and fan enclosure
Includes:
• One IGBT module
• One Gate Interface Board
• Gate Interconnect Harness
• Six Flexible Capacitor Busbars
• Three Snubber Capacitors
• One Tie Down Capacitor Mount
Drive requires three kits.
For AC input only.
Kit includes two SCR Modules.
Drive requires three kits.
We recommend replacing all three phases
(three kits) at the same time.
AC input requires three kits.
DC input requires one kit.
For AC input only
DC Link Choke
Miscellaneous
Balancing Resistor Kit
Bus Capacitor Kit
Capacitor Bus Finger Kit
Current Transducer
MOV Surge Suppressor
Power Supply, 24V
Thermal Sensor Kit
Transformer, 1000 VA
Transformer Fuses
SK-G1-RB1-F910 (Replaces
1336-RLOAD-SP3A)
(1)
SK-G1-BUSCAP1-F10
SK-G1-FLXBUS1
SK-G1-CT1-F910
SK-G1-MOV1-F10
SK-G9-PWRS24
SK-G1-THM1-F10
SK-G9-XFMR1-F10
SK-G9-FUSE1-F10
AC and DC Input (includes DC+ bus bar and resistor assembly).
Includes one Capacitor.
Drive requires 26 kits.
Included with the kit for Inverter Power
Module (IGBT).
Can be ordered separately without Inverter
Power Module (IGBT) if needed.
Includes busbars for one phase:
• Three positive Flexible Capacitor Busbars
• Three negative Flexible Capacitor Busbars
Drive requires three kits.
Includes one Transducer.
Drive requires three kits.
For AC input only
For Current Transducers (CTs)
Includes:
• Main Control Panel Thermal Sensor
• Heatsink Thermal Sensor
For AC input only.
(4)
Includes:
• One Transformer
• Three fuses
(5)
For AC input only
Rockwell Automation Publication 20B-IN026C-EN-P - October 2015
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 New and Updated Information
- 9 Introduction
- 10 Component Kits
- 11 Recommended Tools
- 12 Safety Precautions
- 13 Important Initial Steps
- 15 Overview
- 20 Fastener Torque Specifications
- 20 Torque Sequence
- 21 Torque Specifications
- 24 Main Control Panel (Inverter Assembly)
- 24 Remove Components
- 25 Install Components
- 26 Stacking Panel (Inverter Assembly)
- 26 Remove Components
- 28 Install Components
- 29 Transitional Busbar Assembly (Inverter Assembly)
- 29 Remove Components
- 33 Install Components
- 35 Busbar Assembly (Converter Assembly)
- 35 Remove Components
- 38 Install Components
- 39 Overview
- 40 Main Control Board (version 2.0)
- 40 Remove Components
- 41 Install Components
- 42 T-Comm Board
- 42 Remove Components
- 44 Install Components
- 45 Power Interface Board
- 45 Remove Components
- 46 Install Components
- 47 Switch Mode Power Supply Board
- 47 Remove Components
- 48 Install Components
- 49 24V Power Supply Board
- 49 Remove Components
- 49 Install Components
- 50 DC Bus Filter Board
- 50 Remove Components
- 50 Install Components
- 51 Bus Capacitors
- 51 Remove Components
- 52 Install Components
- 53 Capacitor Bank Fan
- 53 Remove Components
- 53 Install Components
- 54 Inverter Power Module (IGBT)
- 55 Remove Components
- 57 Install Components
- 60 Gate Interface Board
- 60 Remove Components
- 61 Install Components
- 62 Current Transducer
- 62 Remove Components
- 63 Install Components
- 64 Heatsink Fan
- 64 Remove Components
- 64 Install Components
- 65 Thermal Sensor
- 65 Remove Components
- 66 Install Components
- 67 Balancing Resistor
- 67 Remove Components
- 72 Install Components
- 76 Fan Transformer (IP20 version only)
- 76 Remove Components
- 76 Install Components
- 77 Overview
- 78 DC Link Choke
- 78 Remove Components
- 78 Install Components
- 79 MOV Surge Suppressor
- 79 Remove Components
- 79 Install Components
- 80 Converter Power Modules (SCR)
- 80 Remove Components
- 81 Install Components
- 83 Precharge Board
- 83 Remove Components
- 83 Install Components
- 84 Snubber Resistors
- 84 Remove Components
- 85 Install Components
- 86 Snubber Boards
- 86 Remove Components
- 87 Install Components
- 88 Thermal Sensor
- 88 Remove Components
- 89 Install Components
- 90 Heatsink Fan Assembly
- 90 Remove Components
- 91 Install Components
- 93 20B-IN026B-EN-P, July 2013