1.2 Board Features. Broadcom Stingray PS225
Broadcom Stingray PS225, a high-performance SmartNIC adapter, offers exceptional network and compute capabilities in a compact design. With dual 25GbE SFP28 ports, it delivers blazing-fast data transfer speeds. The PS225 is powered by an 8-core ARMv8 processor running at 3.0 GHz, providing unparalleled processing power for demanding network applications. It also features up to 16GB of DDR4 memory, ensuring smooth handling of complex tasks.
Advertisement
Advertisement
PS225
User Guide Quick Start Guide
1.2 Board Features
PCIe Interface:
– x8 PCI Express 3.0 compliant
– Single-Root I/O Virtualization (SR-IOV) with up to 128 VFs
– Function Level Reset (FLR) support
Processing Subsystem:
– 8-core ARMv8 A72 64-bit processor subsystem at 3.0 GHz
– 16 MB total cache (8 MB L2 + 8 MB L3)
– Two channels (64-bit + ECC) of DDR4 memory at 2,400 MT/s
Hardware Accelerators:
– TruFlow™ configurable flow accelerator engine
– Line-rate Crypto engine with single-pass hashing and encryption
– RAID 5/6 engine
Network Interface:
– Dual-port SFP28 pluggable media interface, supporting 25GbE or 10GbE optical transceiver or direct-attach copper
(DAC) cables
– RDMA over Converged Ethernet (RoCE) v1 and v2
– Advanced congestion avoidance
– Virtual network termination – VXLAN, NVGRE, Geneve, GRE
– Multiqueue, NetQueue, and VMQ
– Tunnel-aware stateless offloads:
IPv4 and IPv6
TCP, UDP, and IP checksum
Large send offload (LSO)
Large receive offload (LRO)
TCP segmentation offload (TSO)
Receive-side scaling (RSS)
Transmit-side scaling (TSS)
Confidential
VLAN insertion/removal
– DCB support: PFC, ETS, QCN, DCBx
– Jumbo frames (up to 9 KB)
– Network boot (PXE, UEFI)
Security and Manageability:
– Secure Boot
– Secure Key Storage
– ARM PKA Engine
Broadcom
– NC-SI over RMB (via separate connector)
Form Factor:
– PCI Express CEM specification for half-height, half-length adapters
– I/O brackets available in both low profile and full height
Broadcom Confidential 5880X-PS225-UG101
5
Download
Advertisement