Chapter 2: Basic Checkout
Calibrating The Touchscreen
To install ActiveSync, follow the step-by-step instructions provided with the program’s setup wizard. Refer to the following website for details:
http://www.microsoft.com/windowsmobile/resources/downloads/pocketpc/activesync35.mspx
2.5 Calibrating The Touchscreen
If your 7530 is equipped with a touchscreen, it will need to be calibrated. Refer to
“Calibrating The Touchscreen” on page 41 for details.
2.6 Resetting The 7530 Hand-Held
Important: Because Psion Teklogix cannot guarantee what has been saved
(registry) after a reset, this should be considered as a last resort.
To reset the 7530:
• Press and hold down the <BLUE> key and the <ENTER/ON> key simultaneously for a minimum of six seconds.
A reset results in a complete reboot of the unit. All RAM memory contents are lost.
The contents of the flash memory and memory card may be preserved, but Psion
Teklogix cannot guarantee. However, you should keep in mind that When the 7530 is reset, the screen displays the Psion Teklogix and Microsoft® Windows® CE.net splash screen before displaying the startup desktop.
Note: You do not need to reset your 753 0 after configuring the radio.
28 Psion Teklogix 753
0
Hand-Held Computer User Manual
