Air Filter. Alcatel-Lucent 7750 SR-a8, 7750 SR-a4

Site Preparation

Air Filter

The air filter is factory-installed and is field-replaceable. The air filter must be in place before the chassis is powered up.

The air filter should be inspected monthly. Replace the filter media when accumulated dust is present.

Allow at least 20 in. (50.8 cm) in the front for installation and maintenance access.

Storage

Impedance panels are required in all empty card and component slots to prevent excess dust accumulation and to help control airflow and electromagnetic interference.

To store an uninstalled 7750 SR-a4 or 7750 SR-a8 or extra field-replaceable parts (if applicable), repackage the components in the original packaging or an appropriately sized container and keep them in a dry, dust-free, and temperature-controlled environment.

Table 31 describes the storage specifications.

Table 31: Storage Specifications

Parameter Description

Storage and shipping temperature From –40° to 158°F (–40° to 70°C)

Non-condensing relative humidity Within 5 to 95%

7750 SR-a4 and SR-a8 Installation Guide 67