- Home
- Domestic appliances
- Small kitchen appliances
- Microwaves
- Panasonic
- NE1878BPQ
- Operating instructions
advertisement
How to Operate
POWER LEVEL SELECTOR PAD
Each time the pad is touched, the Power Level switches as the illustration below.
P10 P9 P8 P7 P6 P5 P4
P2
HIGH
MEDIUM
HIGH
P1
MEDIUM
*IEC Test Procedure
P0 PU1
P10: 1800 W*
P9: 90%
P8: 80%
P7: 70%
P6: 60%
P5: 50%
P4: 40%
PU2 PL1
LOW
DEFROST
OFF
HEAT FROM
TOP DOWN
HEAT FROM
BOTTOM UP
P3
PL2 P10 again.
P3: 30%
P2: 25%
P1: 340 W
P0: 0%
PU1: 50%
PU2: 25%
PL1: 50%
PL2: 25%
Before operating the oven, make sure it is plugged into a properly earthed electrical outlet.
A. Manual Single Stage Heating
1. Open the door.
The oven lamp will turn on. “0” will appear in the Digital Display Window.
2. Put the food into a suitable container, place it in the centre of the oven and then close the door securely.
The oven lamp will turn off.
Note: While “0” appears, operation is available. 1 minute after the door is closed,
“0” will disappear.
3. Select the desired Power Level by touching Power Level Selector Pad.
The selected Power Level will be displayed in the Digital Display Window and the single stage heating indicator “1” will start to blink.
[Example]: Touch Power Level Selector Pad once for P10 power.
Note: Each time Power Level Selector Pad is touched, the Power Level switches as the above Power Level Selector illustrates.
4. Set the desired heating time by touching the appropriate Number Pads.
Note: The maximum set time for P1 and P0 is 30 minutes, and 15 minutes for all others.
[Example]: Touch Number Pads “2”, “0” and “0” for 2 minutes.
5. Touch Start Pad.
A. Heating will start.
B. During operation, the indicator appears from the left.
C. The heating time on digital display will count down.
When touching Power Level Selector Pad, the current power level will be displayed for 3 seconds.
6. When all time expires, the end of cycle beep tone will sound and all heating will stop. The display will blink “0000” until the door is opened. 1 minute later cooling fan will stop.
(Continued on next page.)
– 18 –
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 4 Important Safety Instructions
- 11 Care of Your Microwave Oven
- 13 Types of Container to Use
- 15 Before Use
- 16 Definitions and Feature Explanations
- 17 Outline Diagram
- 18 How to Operate
- 18 A. Manual Single Stage Heating
- 19 B. Manual 2 to 5 Stage Heating
- 20 C. Programming Memory Pads for Single Stage Heating
- 21 D. Programming Memory Pads for 2 to 5 Stage Heating
- 21 E. Memory Pad Heating
- 22 F. Programming Double/Triple Quantity Pad
- 23 G. Memory Pad Heating for Double/Triple Quantity Heating
- 23 H. +10s/+20s Pad Heating
- 24 I. To Read the Cycle Counter
- 24 J. To Activate Program Lock
- 24 K. To Deactivate Program Lock
- 25 L. To Read Program List
- 26 M. To Select Beep Tone Options
- 27 N. Procedure to Program the Air Filter Cleaning Cycle
- 28 O. Oven Lamp
- 29 P. Digital Display Window at the End of Heating Cycle
- 30 Before Cooking
- 31 Cooking Instructions – Heating and Defrosting Time Charts
- 33 Self Diagnostics Failure Code Explanation
- 33 Installation Instructions for Stacking
- 34 Specifications