2 Getting started. Philips SRP4004/86, SRP4004

2 Getting started

2.1 Inserting the batteries

•

Insert 2 AAA type batteries, noting the + and - configuration in the battery compartment.

Note

When replacing the batteries, all user settings will be retained in the remote control memory for an unlimited period of time.

2.2 Testing the universal remote control

It is advised to test whether your device(s) already respond(s) to the SRP4004 before setting it up (see chapter

2.3

). The example below instructs you how to do this for your TV. You can repeat the same steps for other devices

(STB, DVD player/recorder and VCR) which you want to operate using the SRP4004.

Example: testing the universal remote control on your TV:

1 Turn ON your TV manually or use the original remote control for this. Tune to channel 1.

2 Press the device selection key to select TV.

• The key lights up.

• If the key does not light up, check whether the batteries are properly inserted

(see chapter 2.1

).

3 Check whether the keys that you need for operating your TV are working. For an overview of the keys and their functions see chapter 3.1

.

• If the TV responds as it should to all of the key commands, the SRP4004 is ready for use.

• If the device does not respond at all or not to all of the key commands, follow the instructions in chapter 2.3.

4 EN

SRP4004_86_Manual.indd 4 28-05-09 18:17