Chapter 19 – Summary Tables
19.2 Star-Hash (*#) Network Commands
The following command strings can be sent to the network via ATD and have to be terminated with a semicolon.
The command strings are defined with GSM 2.30.
Table 19.1 Star-Hash (*#) Overview (Abbreviations used in this table on defined on the following page)
Star-Hash Code
Phone Security
*#06#
**04[2]*oldPin[2]*newPin[2]*new-
Pin[2]#
**05[2]*unblKey[2]*newPin[2]*new-
Pin[2]#
*#0003*MasterPhoneCode#
Functionality
Query IMEI
Change SIM pwd
Change/Unblocking SIM pwd
Response, also refer to Table 19.3
<IMEI> OK
+CME ERROR: <err> / OK
+CME ERROR: <err> / OK
Unlock “PS” lock with Master Phone
Code
+CME ERROR: <err> / OK
+CME ERROR: <err> / OK
Phone Number Presentation
*#30#
*#31#
*31#<Phonenumber>[;]
#31#<Phonenumber>[;]
*#76#
*#77#
Act/deact/int BAOC
+CLIP : <n>,<m> OK (see AT+CLIP)
+CLIR : <n>,<m> OK (see AT+CLIR)
Call Forwarding
(choice of *,#,*#,**,##)21*DN*BS# Act/deact/int/reg/eras CFU
(choice of *,#,*#,**,##)67*DN*BS# Act/deact/int/reg/eras CF busy
^SCCFC : <reason>, <status>,
<class> [,...] like +CCFC *) (see
AT+CCFC) see above
(choice of *,#,*#,**,##)61*DN*BS*T# Act/deact/int/reg/eras CF no reply see above
(choice of *,#,*#,**,##)62*DN*BS# Act/deact/int/reg/eras CF no reach see above
(choice of
*,#,*#,**,##)002*DN*BS*T#
Act/deact/int/reg/eras CF all see above
(choice of
*,#,*#,**,##)004*DN*BS*T#
Act/deact/int/reg/eras CF all cond. see above
Call Waiting
(choice of *,#,*#)43*BS# Activation/deactivation/int WAIT +CCWA : <status>, <class> [,...] like
+CCWA *) (see: AT+CCWA)
Call Barring
(choice of *,#,*#)33*Pw*BS#
Check status of CLIP (Calling Line
Identification Presentation)
Check status of CLIR (Calling Line
Identification Restriction)
Suppress CLIR
Activate CLIR
Check status of COLP (Connected
Line Identification Presentation)
Check status of COLR (Connected
Line Identification Restriction)
(see AT+CLIR)
(see AT+CLIR)
+COLP : <n>,<m> OK (see
AT+COLP)
+COLR : 0,<m> OK (where <m> = active or not active)
(choice of *,#,*#)331*Pw*BS#
(choice of *,#,*#)332*Pw*BS#
(choice of *,#,*#)35*Pw*BS#
(choice of *,#,*#)351*Pw*BS#
#330*Pw*BS#
#333*Pw*BS#
#353*Pw*BS#
Act/deact/int BAOIC
Act/deact/int BAOIC exc.home
Act/deact/int. BAIC
Act/deact/int BAIC roaming
Deact. All Barring Services
Deact. All Outg.Barring Services
Deact. All Inc.Barring Services
^SCLCK : <fac>, <status>, <class>
[, ...] like +CLCK *) (See AT+CLCK) see above see above see above see above see above see above see above
Call Hold / Multiparty
C[C] in call Call hold and multiparty +CME ERROR: <err> / OK
USSD Messages
[C]...[C]#
C[C] (excluded 1[C])
Send USSD message
Send USSD message
+CME ERROR: <err> / OK
+CME ERROR: <err> / OK
*) Notes on ^SCCFC, +CCWA, ^SCLCK: The output depends on the affected basic service of the Star-Hash code. One line will be output for every tele- or bearer service coded in basic service code BS.
^SCCFC and ^SCLCK are modified by giving an additional <reason> or <fac> in front of the regular output string generated by the standard commands +CCFC and +CLCK.
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
264
Chapter 19 – Summary Tables
Table 19.2 Abbreviations of Codes and Parameters used in Star-Hash Network Commands Table Above
Abbreviation Meaning
ZZ Type of supplementary services:
Barring services
All services
DN Dialing
BS Basic service equivalent to parameter class:
Voice
SMS
T
Data circuit asynchron
Data circuit synchron dedicated PAD access dedicated Packet access
Data circuit asynchron+PAD
Data circuit synchron+Packet
Data circuit asynchron+synchron+Packet+PAD
All Services
Time in seconds
Value
330
Not specified
String of digits 0-9
13
12
25
24
27
26
21
22
20
--
--
--
In contrast to AT+CCFC, parameter T has no default value. If T is not specified, an operator defined default or the last known value may be used, depending on the network operator.
PW Password
C Character of TE character set (e.g., asterisks, hash or digit in case of USSD, or digits in case of held calls or multiparty calls)
Table 19.3 Star-Hash Command Response Parameters
Parameter
<m>
<n>
<status>
<class>
<fac>
<reason>
Meaning
Mode: 0 = not active, 1 = active
Unsolicited result code: 0 = presentation disabled, 1 = presentation enabled
Status: 0 = not active, 1 = active
Represents BS = basic service, refer to AT+CCFC, AT+CLCK
Facility lock, refer to AT+CLCK
Call forwarding reason
For exact specification of format and parameters for Star-Hash commands refer to GSM 02.04, Table 3.2 and
GSM 02.30, Annex C.
Table 19.4 Star-Hash Commands for Supplementary Services
Star-Hash Code
*
**
*#
#
##
Abbreviations in Table 19.1
act reg int deact eras
Functionality
Activate (except for CLIR, see list above)
Register and activate
Check status (interrogate)
Deactivate (except for CLIR, see list above)
Unregister and deactivate
Multi-Tech Systems, Inc. AT Commands for EDGE Modems (S000371G)
265
