4.1.14. Change emulation mode. Brother HL-1050, HL-1250, HL-1070, HL-1270N, HL-2060, HL-2400C Series, HL-P2500, HL-1660e Series

99/08/03

4.1.14. Change emulation mode

EscCRGL (27)(13)(71)(76) <1Bh><0Dh><47h><4Ch>

This command changes the emulation mode to HP-GL mode.

EscCRAB (27)(13)(65)(66) <1Bh><0Dh><41h><42h>

This command changes the emulation mode to BR-Script Batch mode.

EscCRAI (27)(13)(65)(73) <1Bh><0Dh><41h><49h>

This command changes the emulation mode to BR-Script Interactive mode.

EscCRI (27)(13)(73) <1Bh><0Dh><49h>

This command changes the emulation mode to IBM Proprinter XL mode.

EscCRE (27)(13)(69) <1Bh><0Dh><45h>

This command changes the emulation mode to Epson FX-850 mode.

Depending on the model, you can also switch between emulation modes using the printer’s control panel (see the User Guide).

Emulations available for each model are listed below.

PCL HP-GL BR-Script BR-Script 2 Epson

FX-850

IBM

Proprinter

XL

HL-1050

HL-1070

HL-1250

HL-1270N

HL-P2500

HL-1660e

HL-2060

HL-2400C

CHAPTER 2 "PCL" - 19