advertisement
08 Control with HDMI function
54
Control with HDMI function
About remote control operation
Important
!
The procedure for setting the receiver operation mode differs for the remote controls included with the SC-LX85 and SC-LX75. For the SC-LX85’s remote control, set the remote control operation selector switch to RECEIVER .
For the SC-LX75’s remote control, press the
button. When “set the remote control to the receiver operation mode” is indicated in these instructions, use the respective procedure described above.
!
You cannot use this function with components that do not support Control with HDMI.
!
We only guarantee this receiver will work with Pioneer Control with HDMI-compatible components and components of other makes that support the Control with HDMI function. However, we do not guarantee that all synchronized operations will work with components of other makes that support the
Control with HDMI function.
!
Use a High Speed HDMI ® cable when you want to use the Control with HDMI function.
The Control with HDMI function may not work properly if a different type of HDMI cable is used.
!
For details about concrete operations, settings, etc., refer to also the operating instructions for each component.
About the Control with HDMI function
Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray
Disc player or with a component of another make that supports the Control with HDMI functions are possible when the component is connected to the receiver using an HDMI cable.
!
The receiver’s volume can be set and the sound can be muted using the TV’s remote control.
!
The receiver’s input switches over automatically when the TV’s input is changed or a Control with HDMI-compatible component is played.
!
The receiver’s power is also set to standby, when the TV’s power is set to standby.
Making Control with HDMI connections
You can use synchronized operation for a connected TV and up to 7 other components.
!
Be sure to connect the TV’s audio cable to the audio input of this unit. When the TV and receiver are connected by HDMI connections, if the TV supports the HDMI ARC (Audio
Return Channel) function, the sound of the
TV is input to the receiver via the HDMI OUT terminal, so there is no need to connect an audio cable. In this case, set TV Audio at
HDMI Setup to via HDMI (see HDMI Setup on page 54).
For details, see Connecting your TV and playback components on page 25.
Important
!
With Pioneer devices, the Control with HDMI functions are referred to as “KURO LINK”.
Important
!
When connecting this system or changing connections, be sure to switch the power off and disconnect the power cord from the wall socket. After completing all connections, connect the power cords to the wall socket.
!
After this receiver is connected to an AC outlet, a 2 second to 10 second HDMI initialization process begins. You cannot carry out any operations during this process. The
HDMI indicator in the front panel display blinks during this process, and you can turn on this receiver once it has stopped blinking.
When you set the Control with HDMI to OFF , you can skip this process. For details about the
Control with HDMI feature, see Control with
HDMI function on page 54.
!
To get the most out of this function, we recommend that you connect your HDMI component not to a TV but rather directly to the HDMI terminal on this receiver.
!
The Control with HDMI function can be used with a TV connected to the HDMI OUT 1 terminal, but not with a TV connected to the
HDMI OUT 2 terminal.
HDMI Setup
You must adjust the settings of this receiver as well as the connected Control with HDMIcompatible components in order to make use of the Control with HDMI function. For more information see the operating instructions for each component.
1 Set the remote control to the receiver operation mode, then press HOME MENU.
2 Select ‘System Setup’, then press
ENTER.
3 Select ‘HDMI Setup’, then press ENTER.
4 Select the ‘Control’ setting you want.
Choose whether to set this unit’s Control with
HDMI function ON or OFF . You will need to set it to ON to use the Control with HDMI function.
When using a component that does not support the Control with HDMI function, set this to OFF .
!
ON – Enables the Control with HDMI function. When this unit’s power is turned off and you have a supported source begin playback while using the Control with HDMI function, the audio and video outputs from the HDMI connection are output from the TV.
Also, by setting this to ON , the Auto Sound
Retriever Link and Stream Smoother Link functions can be operated automatically by connecting a player supporting the respective functions. See Setting the Audio options on page 57 for details on Auto Sound
Retriever Link, Setting the Video options on page 59 for details on Stream Smoother Link.
!
OFF – The Control with HDMI is disabled.
Synchronized operations cannot be used.
When this unit’s power is turned off, audio and video of sources connected via HDMI are not output.
5 Select the ‘Control Mode’ setting you want.
Choose whether you want to enable HDMI for all linked functions or the PQLS function only.
However, Display Power Off will activate the settings set forth in step 6 below.
!
ALL – Enabled for all linked functions.
!
PQLS – Enabled only for the PQLS function.
When PQLS is selected, link functions other than the PQLS function may not work properly. If you wish to use all link functions, select ALL .
6 Select the ‘Display Power Off’ setting you want.
If the TV’s power is turned off while using the
Control with HDMI function, the receiver’s
En
advertisement
Related manuals
advertisement
Table of contents
- 6 Our philosophy
- 6 Features
- 7 Checking what’s in the box
- 7 Installing the receiver
- 7 Loading the batteries
- 7 Operating range of remote control unit
- 7 two-way communications
- 8 (included CD-ROM)
- 9 Remote control (In case of SC-LX85)
- 11 Remote control (In case of SC-LX75)
- 12 Display
- 13 Front panel
- 14 Connecting your equipment
- 14 Rear panel
- 15 Connecting the RF adapter
- 15 Determining the speakers’ application
- 17 Placing the speakers
- 18 Connecting the speakers
- 19 Installing your speaker system
- 24 About the audio connection
- 24 About the video converter
- 24 About HDMI
- 25 components
- 26 recorder and other video sources
- 27 other set-top box
- 27 Connecting other audio components
- 28 inputs
- 28 Connecting additional amplifiers
- 29 Connecting AM/FM antennas
- 29 MULTI-ZONE setup
- 30 LAN interface
- 31 ADAPTER
- 31 Connecting an iPod
- 31 Connecting a USB device
- 31 component to the front panel input
- 31 Connecting to a wireless LAN
- 32 Connecting an IR receiver
- 32 with this unit’s sensor
- 33 using the 12 volt trigger
- 33 Plugging in the receiver
- 34 About remote control operation
- 34 (OSD Language)
- 34 sound tuning (Full Auto MCACC)
- 36 The Input Setup menu
- 36 Operation Mode Setup
- 38 About remote control operation
- 38 Playing a source
- 38 Playing an iPod
- 39 Playing a USB device
- 41 Listening to the radio
- 43 Enjoyment of Music
- 45 About remote control operation
- 45 using the listening modes
- 47 Selecting MCACC presets
- 47 Choosing the input signal
- 47 Better sound using Phase Control
- 48 Full Band Phase Control
- 49 About remote control operation
- 49 Enjoying the Home Media Gallery
- 49 Features of Home Media Gallery
- 49 Introduction
- 50 Playback with Home Media Gallery
- 51 Advanced operations for Internet radio
- 51 About network playback
- 53 About playable file formats
- 54 About remote control operation
- 54 About the Control with HDMI function
- 54 Making Control with HDMI connections
- 54 HDMI Setup
- 55 Before using synchronization
- 55 About synchronized operations
- 56 Setting the PQLS function
- 56 Stream Smoother Link
- 56 function
- 57 About remote control operation
- 57 Setting the Audio options
- 59 Setting the Video options
- 61 Switching the speaker terminals
- 61 Using the MULTI-ZONE controls
- 62 Making an audio or a video recording
- 62 Reducing the level of an analog signal
- 62 Using the sleep timer
- 62 Dimming the display
- 62 Switching the HDMI output
- 63 Checking your system settings
- 63 Resetting the system
- 64 About the Remote Setup menu
- 64 Operating multiple receivers
- 64 components
- 65 Selecting preset codes directly
- 65 remote controls
- 66 button settings
- 66 of the input function buttons
- 66 Resetting the remote control settings
- 66 Confirming preset codes
- 66 manually
- 66 Direct function
- 67 Multi Operation and System Off
- 68 Controlling components
- 70 Using the RF communications function
- 71 communications
- 72 synchrony with the receiver
- 72 Directional RF Remote Control
- 74 About the Remote Setup menu
- 74 Operating multiple receivers
- 74 components
- 75 Selecting preset codes directly
- 75 remote controls
- 75 button settings
- 75 one input function
- 76 Direct function
- 76 Setting the backlight mode
- 76 Multi Operation and System Off
- 77 Resetting the remote control settings
- 78 Controlling components
- 80 About remote control operation
- 80 Advanced MCACC menu
- 80 Automatic MCACC (Expert)
- 82 Manual MCACC setup
- 85 Checking MCACC Data
- 86 Data Management
- 87 About remote control operation
- 87 System Setup menu
- 87 Manual speaker setup
- 89 Network Setup menu
- 91 Checking the Network Information
- 91 The Other Setup menu
- 94 Troubleshooting
- 103 Troubleshooting of wireless LAN
- 104 About status messages
- 105 Speaker Setting Guide
- 106 HDMI connection
- 106 Cleaning the unit
- 106 LAN converter
- 107 to the R&TTE Directive 1999/5/EC
- 108 Surround sound formats
- 108 About THX
- 109 About iPod
- 110 About FLAC
- 110 with different input signal formats
- 111 Glossary
- 114 Features index
- 115 Specifications
- 116 Preset code list