Basic Settings. D-Link DIR-620

DIR-620 Multifunction Wireless Router Supporting WiMAX, 3G GSM/CDMA with Built-in Switch

User Manual

Configuring via Web-based Interface

Basic Settings

On the Basic settings tab, you can configure basic parameters of the router's WLAN.

Parameter

Hide Access Point

SSID

Figure 31. Basic settings of the wireless LAN.

Description

If the checkbox is selected, other users cannot see your Wi-Fi network. (It is recommended not to select this checkbox in order to simplify initial configuration of your WLAN.)

A name for the WLAN. By default, the value DIR-620 is specified. If your network is spitted into parts, each part has the default name ( DIR-620.2

, DIR-620.3

, and DIR-620.4

). It is recommended to specify another name for the network upon initial configuration (use digits and Latin characters).

Page 47 of 107