Setting the Clock. Audiovox VE827

SETTING THE CLOCK

To adjust the clock, the unit must be in standby mode. To enter standby mode, make sure that the unit is plugged in, but not turned on.

• Check that the rated voltage of the unit matches your local voltage.

1. When the AC power cord is plugged in, the clock display will blink.

3. Press the / buttons to set the current hours then press the SET CLOCK button once to confirm. Then, the MINUTE blinks.

2. Press the SET CLOCK button until the HOUR blinks.

4. Press the / buttons to set the current minutes then press the SET CLOCK button once to start the clock.

SETTING THE COOKING TIMER

1. Press the TIMER button. The “TIMER” indicator appears and the cooking time “10” blinks.

3. When the preset time elapses, the ALARM will sound.

2. Press the / buttons to select your desired time from 1-99 minutes.

• Press the TIMER button repeatedly to select time: 10, 15, 30, 45, 60, 75, 90 minutes.

• Press and hold the / buttons to fast forward/reverse the cooking time.

4. To turn OFF the ALARM, press the TIMER button once. Otherwise, the ALARM will automatically turn off after 60 minutes if no button is pressed.

CANCELLING THE COOKING TIMER

• Press the TIMER button until the time of the cooking timer shows " OFF ". The “TIMER” indicator will disappear.

- 15 -