Specifications. Cobra Electronics XRS 9950

Add to My manuals
23 Pages

advertisement

Specifications. Cobra Electronics XRS 9950 | Manualzz

Specifications

Your Detector

Specifications

Band and Frequencies

Band

X Band

K Band

Safety Alert

Traffic Warning

System

Ka Band

Ku Band

VG-2

Spectre 1

Laser

Strobe

Frequencies

10.525

24.125

24.070

24.110

24.190

24.230

34.700

13.435

11.500

13.300

910

700

± 0.050

± 0.125

± 0.010

± 0.010

± 0.010

± 0.010

± 1.300

± 0.050

± 0.250

± 0.200

± 50

± 300

GHz

GHz

GHz

GHz

GHz

GHz nm nm

GHz

GHz

GHz

GHz

WARNING

Modifications or parts substitutions not approved by Cobra Electronics

Corporation may violate FCC Rules and void your authority to operate this equipment.

This radar detector is covered by one or more of the following U.S. patents:

5,497,148; 5,594,432; 5,612,685; 6,078,279; 6,094,148; 6,621,447.

Additional patents may be listed inside the product or pending.

Optional GPSL

Overview

The Optional GPSL unit monitors vehicle location using the GPS satellite system to add features to your detector. Whenever it is installed and GPS signals are available, it:

Provides alerts as you approach photo-enforced intersections and locations with fixed red light or speed cameras. The built-in location database can be updated at Cobra's website to stay current with photo-enforced locations.

Allows you to identify and store up to 1,000 Alert Locations in addition to those in the database.

Provides direction of travel information using its GPS-based Compass.

Allows you to see the position (latitude and longitude) of your vehicle.

Where to Mount the Optional

If you purchase the GPSL unit, it will need to be mounted near the detector and connected to it with the USB cable (included with GPSL purchase).

Mounting the GPSL is subject to the same considerations as mounting the detector itself and should usually be mounted to the same surface as the detector (see page 3).

An additional requirement for the GPSL is that it needs to “see the sky.”

The satellites of the Global Positioning System send signals that the GPSL uses to determine its position on earth. Those signals can be blocked or weakened by incoming signals which may include windshield wiper blades, mirrored sun screens, dark tinting at the top of the windshield and heated windshields currently available on some vehicles (Instaclear for Ford,

Electriclear for GM). Consult your dealer to see if you have this option.

No external power connection is needed for the GPSL; it is powered from the detector unit.

NOTE

Before starting to mount the Optional GPSL unit, check it to establish which side of the unit is labeled “ This Surface Toward Sky .”

Nothing Comes Close to a Cobra ® 33

32 English

Optional GPSL

Windshield Mounting

1.

Position the GPSL unit before actually mounting it.

• Connect the USB cable to the detector and GPSL unit.

• Hold the GPSL unit in place.

• Mark two corners with a pencil or other non-permanent marker.

2.

Mount the GPSL.

• Peel the protective film from one side of the two fastener strips and attach them to the

GPSL unit.

• Peel the protective film from the exposed side of the fastener strips and press the GPSL unit to the windshield using the marks made in step 1.

• Do not pull on the GPSL for

20 minutes.

NOTE

The fastener strips cannot be easily removed. The adhesive strength increases with the passage of time.

3.

Connect the USB cable between the GPSL and the detector.

TO

SKY

SU

RF

TH

IS

RD

ACE

S

34 English

Optional GPSL

Dashboard Mounting

1.

Position the GPSL unit before actually mounting it.

• Connect the USB cable to the detector and GPSL unit.

• Hold the GPSL unit in place.

• Mark two corners with a pencil or other non-permanent marker.

2.

Mount the GPSL.

• Peel the protective film from one side of the two fastener strips and attach them to the

GPSL unit.

• Peel the protective film from the exposed side of the fastener strips and press the GPSL unit to the dashboard using the marks made in step 1.

• Do not pull on the GPSL for

20 minutes.

NOTE

The fastener strips cannot be easily removed. The adhesive strength increases with the passage of time.

3.

Connect the USB cable between the GPSL and the detector.

TO

SU

WA

RD

TH

S

IS

E

THIS

SURFACE

TOWARDS

SKY

Nothing Comes Close to a Cobra ® 35

advertisement

Related manuals