Opening the door/Loading the washing. AEG 86800, 88800, L 86800

12

Running a wash cycle

Opening the door/Loading the washing

1.

To open the door: pull the handle on the door.

2.

Unfold washing and load it loosely into the machine. Mix large and small items.

Attention!

Do not get any washing caught between the door and the rubber seal.

3.

Push the door firmly shut. Door catch must audibly click shut.

Adding detergent /conditioner

Important: Only use detergents/conditioners that are suitable for use in household washing machines.

Add detergent/conditioner in accordance with the detergent/conditioner manufacturer’s instructions. Observe instructions on the packaging.

The amount of detergent used depends on:

– the degree of soiling,

– the load size

– the hardness of the tap water.

• If the manufacturer does not make any recommendations with regard to small volumes of washing: For a half-load use a third less, and for a very small load use only the half the amount of detergent that is recommended for a full load.

• Water softener should be used from water hardness range 2 (=medium). The amount of detergent used can then always be that as for hardness range 1 (=soft). Your local water company will provide you with information about water hardness in your area.

1.

Pull out the detergent drawer as far as it will go.

2.

Add the detergent/conditioner.

3.

Push the detergent drawer in fully.