Boot Console Handler:LAN station address. HP (Hewlett-Packard) N/A
Add to My manuals239 Pages
HP (Hewlett-Packard) N/A is a reliable and innovative workstation designed to fulfill your diverse computing needs. With its robust construction and advanced features, it empowers you to handle demanding tasks efficiently. This workstation excels in multitasking, allowing you to run multiple applications simultaneously without compromising performance. Its intuitive system unit front panel controls, including the LCD and power switch, provide convenient access to essential functions. The security lock ensures the safety of your valuable data and system. HP (Hewlett-Packard) N/A comes equipped with ample storage device controls and features, making data management a breeze.
advertisement
boot console handler displaying and setting the LAN station address
displaying and setting the LAN station address
It is sometimes necessary to supply the LAN station address of the workstation to other users. For example, if the workstation is to become a member of a cluster, the cluster administrator needs to know your LAN station address in order to add your workstation to the cluster. Note that the LAN station address can be determined using the Boot Console
Handler Information Menu.
A LAN station address for the workstation is the label that uniquely identifies the LAN connection for the workstation at the link level (the hardware level).
To display the workstation’s LAN station address, type the following at the prompt and press Enter :
Information Menu: Enter command> lanaddress
The LAN station address is displayed as a twelve-digit number in hexadecimal notation, similar to the following:
LAN Station Address: 001083-000429
The address is for the workstation’s built-in LAN interface.
Chapter 6 181
advertisement
Key Features
- Robust construction for durability and reliability
- Advanced features for efficient multitasking
- Intuitive system unit front panel controls for ease of use
- Security lock for data protection
- Ample storage device controls and features for data management
- LCD for quick system monitoring
Related manuals
Frequently Answers and Questions
What is the duration of the warranty for HP (Hewlett-Packard) N/A?
What is the printing date of the service handbook?
What is the product description of HP (Hewlett-Packard) N/A?
What are the system unit front panel controls of HP (Hewlett-Packard) N/A?
advertisement
Table of contents
- 1 service handbook
- 1 service handbook
- 1 hp workstation c-class
- 1 Manufacturing Part Number: n/a
- 1 Printed in USA October 2001
- 1 Edition E1001
- 2 notice
- 2 notice
- 2 hewlett-packard warranty statement
- 2 hewlett-packard warranty statement
- 2 1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship...
- 2 1. HP warrants HP hardware, accessories and supplies against defects in materials and workmanship...
- 2 2. HP warrants that HP software will not fail to execute its programming instructions, for the pe...
- 2 3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If ...
- 2 4. HP products may contain remanufactured parts equivalent to new in performance or may have been...
- 2 5. The warranty period begins on the date of delivery or on the date of installation if installed...
- 2 6. Warranty does not apply to defects resulting from (a) improper or inadequate maintenance or ca...
- 3 7. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO OTHER WARRANTY O...
- 3 8. HP will be liable for damage to tangible property per incident up to the greater of $300,000 o...
- 3 9. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE CUSTOMER’S SOL...
- 3 restricted rights legend
- 3 restricted rights legend
- 4 printing history
- 4 printing history
- 17 1 product information
- 18 • Product description
- 18 • Product description
- 18 • System unit front panel controls
- 18 • System unit rear panel connectors
- 18 • Monitor information
- 18 • Keyboard and Mouse information
- 18 • Operating System Overview
- 19 Product Description
- 19 Product Description
- 19 • Processor:
- 19 • Processor:
- 19 • Operating System:
- 19 • User Interface:
- 19 • Monitors:
- 19 • Optional Graphics:
- 19 • Main Memory:
- 19 • Internal Storage Devices:
- 19 • Standard Network:
- 19 • Standard I/O Ports:
- 20 • Optional I/O:
- 20 • Keyboard:
- 20 • Mouse:
- 21 system unit front panel controls
- 21 system unit front panel controls
- 21 Figure11. System Unit Front Panel Controls
- 21 Figure11. System Unit Front Panel Controls
- 21 LCD:location
- 21 LCD:location
- 21 LCD:location
- 22 LCD:symbols
- 22 LCD:symbols
- 22 LCD:symbols
- 22 Power switch:soft power down procedure
- 22 Power switch:soft power down procedure
- 22 Power switch:soft power down procedure
- 22 Storage Device:controls and features
- 22 Storage Device:controls and features
- 22 Storage Device:controls and features
- 22 NOTE You cannot have two internal storage devices of the same type. For example, you cannot have ...
- 22 Figure 13.
- 23 Storage device:CD drive
- 23 Storage device:CD drive
- 23 Storage device:CD drive
- 23 <TABLE>
- 23 Table11. CD Drive Controls
- 23 <TABLE HEADING>
- 23 <TABLE ROW>
- 23 Control/Feature
- 23 Purpose
- 23 <TABLE BODY>
- 23 <TABLE ROW>
- 23 Eject Button
- 23 Press to open the Disc Tray and insert or remove a disc. When the drive is in use, press the ejec...
- 23 <TABLE ROW>
- 23 Emergency Eject
- 23 If the workstation does no have power, you can insert the end of a paper clip into this small hol...
- 23 <TABLE ROW>
- 23 Disk Tray
- 23 The Disk Tray holds the CD. This style of CD drive does not use a disk caddy.
- 23 <TABLE ROW>
- 23 Busy Indicator
- 23 Lights during a data access operation and blinks during a data transfer. The indicator blinks ini...
- 23 • A defective disc
- 23 • A defective disc
- 23 • A disc insertion error (for example, an upside down disc)
- 23 • No disc present
- 23 NOTE The audio features of the CD drive are supported through applications only. One such applica...
- 24 Figure 14.
- 24 Figure14. Floppy Drive Controls and Features
- 24 Figure14. Floppy Drive Controls and Features
- 24 <TABLE>
- 24 Table12. Floppy Drive Controls and Features
- 24 <TABLE HEADING>
- 24 <TABLE ROW>
- 24 Control/Feature
- 24 Purpose
- 24 <TABLE BODY>
- 24 <TABLE ROW>
- 24 Floppy Drive Eject Button
- 24 Push the eject button to remove floppy diskettes from the drive.
- 24 <TABLE ROW>
- 24 Floppy Drive Activity LED
- 24 The floppy drive LED flashes to indicate the drive is in use.
- 24 security lock
- 24 security lock
- 25 System Unit Rear Panel Connectors
- 25 System Unit Rear Panel Connectors
- 25 • Two serial ports (RS-232)
- 25 • Two serial ports (RS-232)
- 25 • Two Universal Serial Bus ports (USB)
- 25 • LAN connector, 10 BaseT/100 BaseT
- 25 • HP parallel IEEE 1284 (printer) connector
- 25 • Audio connectors (PCI based, line in, line out, headset, and microphone in)
- 25 • Ultra2 Wide LVD (Low Voltage Differential) SCSI
- 25 • Ultra Narrow Single-Ended (NSE) SCSI
- 25 • TOC (transfer of control) button
- 25 • AC power cord connector
- 25 • Security loop
- 25 NOTE To maintain FCC/EMI compliance, verify that all cables are fully seated and properly fastened.
- 25 Figure15. System Unit Rear Panel Connectors
- 25 Figure15. System Unit Rear Panel Connectors
- 26 Rear Panel Connectors:audio connectors
- 26 Rear Panel Connectors:audio connectors
- 26 Rear Panel Connectors:audio connectors
- 26 NOTE Hewlett-Packard recommends using gold-plated plugs available through audio retailers for bes...
- 26 Figure16. Audio Connectors
- 26 Figure16. Audio Connectors
- 26 Table 13.
- 27 <TABLE>
- 27 Table13. Audio Electrical Specifications
- 27 <TABLE BODY>
- 27 <TABLE ROW>
- 27 Frequency Response
- 27 25 to 20KHz
- 27 <TABLE ROW>
- 27 Input Sensitivity/Impedance
- 27 <TABLE ROW>
- 27 Line in
- 27 2.0V pk/47kohm
- 27 <TABLE ROW>
- 27 Microphone in
- 27 22mVpk/1kohm
- 27 <TABLE ROW>
- 27 Max Output Level/Impedance
- 27 <TABLE ROW>
- 27 Line Out
- 27 2.8Vpp/47kohm
- 27 <TABLE ROW>
- 27 Headphone
- 27 2.75Vpp/50ohm
- 27 <TABLE ROW>
- 27 Speaker (internal)
- 27 5.88Vpp/48ohm
- 27 <TABLE ROW>
- 27 Output Impedance
- 27 <TABLE ROW>
- 27 Line Out
- 27 619ohm
- 27 <TABLE ROW>
- 27 Headphone
- 27 118ohm
- 27 USB connectors
- 27 USB connectors
- 27 The USB connectors located on the rear panel of the workstation provide an interface for the keyb...
- 27 CAUTION Usage of devices other than USB specification may result in unpredictable functionality a...
- 27 NOTE The USB clip on the rear of the chassis provides strain relief for the USB cables.
- 27 Rear Panel Connectors:parallel
- 27 Rear Panel Connectors:parallel
- 27 Rear Panel Connectors:parallel
- 27 The 25-pin HP Parallel I/O interface uses IEEE 1284 I/O interface protocols to support peripheral...
- 27 Rear Panel Connectors:network
- 27 Rear Panel Connectors:network
- 27 Rear Panel Connectors:network
- 28 Rear Panel Connectors:serial
- 28 Rear Panel Connectors:serial
- 28 Rear Panel Connectors:serial
- 28 Table 14.
- 28 <TABLE>
- 28 Table14. Serial I/O Pins
- 28 <TABLE HEADING>
- 28 <TABLE ROW>
- 28 Pin No.
- 28 Signal
- 28 Description
- 28 <TABLE BODY>
- 28 <TABLE ROW>
- 28 1
- 28 DCD
- 28 Data Carrier Detect
- 28 <TABLE ROW>
- 28 2
- 28 RXD
- 28 Receive Data
- 28 <TABLE ROW>
- 28 3
- 28 TXD
- 28 Transmit Data
- 28 <TABLE ROW>
- 28 4
- 28 DTR
- 28 Data Terminal Ready
- 28 <TABLE ROW>
- 28 5
- 28 GND
- 28 Ground
- 28 <TABLE ROW>
- 28 6
- 28 DSR
- 28 Data Set Ready
- 28 <TABLE ROW>
- 28 7
- 28 RTS
- 28 Request To Send
- 28 <TABLE ROW>
- 28 8
- 28 CTS
- 28 Clear To Send
- 28 <TABLE ROW>
- 28 9
- 28 RI
- 28 Ring Indicator
- 28 SCSI:connectors
- 28 SCSI:connectors
- 28 SCSI:connectors
- 28 NOTE There must ALWAYS be a terminator at both ends of a SCSI bus. This means one internal termin...
- 29 Rear Panel Connectors:TOC
- 29 Rear Panel Connectors:TOC
- 29 Rear Panel Connectors:TOC
- 29 Rear Panel Connectors:power cord
- 29 Rear Panel Connectors:power cord
- 29 Rear Panel Connectors:power cord
- 29 Rear Panel Connectors:security loop
- 29 Rear Panel Connectors:security loop
- 29 Rear Panel Connectors:security loop
- 29 1. Inspect left side panel for proper seating in the mainframe chassis.
- 29 1. Inspect left side panel for proper seating in the mainframe chassis.
- 29 2. Push in the retractable pin on the spring loaded square fastener.
- 29 3. Insert the locking device through the top and bottom holes of the square fastener.
- 29 4. Inspect after locking device is in place to assure that the retractable pin is captured in the...
- 29 NOTE A locking device is not supplied with the workstation; the customer must supply a lock to us...
- 30 Figure17. Security Loop Operation
- 30 Figure17. Security Loop Operation
- 31 monitor information
- 31 monitor information
- 31 • 19-inch, 1280¥1024 color monitor (A4575A)
- 31 • 19-inch, 1280¥1024 color monitor (A4575A)
- 31 • 19-inch, 1600¥1200 color monitor (A4575A)
- 31 • 21-inch, 1280¥1024 color monitor (A4576A)
- 31 • 21-inch, 1600¥1200 color monitor (A4576A)
- 31 • HP A4575A Color Monitor CE Handbook
- 31 • HP A4575A Color Monitor CE Handbook
- 31 • HP A4575A Color Monitor CE Handbook
- 31 NOTE Note that the word “multi-sync” is used as a common word to refer to “multi-frequency” and/o...
- 31 NOTE The connection to earlier HP monitors with 15-pin mini-DSub cables can be made using the A41...
- 32 USB:support
- 32 USB:support
- 32 USB:support
- 32 USB keyboard
- 32 USB keyboard
- 32 NOTE HIL and PS/2 devices are not supported by the c-class workstations.
- 32 USB hp scroll mouse
- 32 USB hp scroll mouse
- 32 hp hub for USB devices
- 32 hp hub for USB devices
- 33 operating system overview
- 33 operating system overview
- 33 operating system overview
- 33 http://www.docs.hp.com/
- 34 memory
- 34 memory
- 34 Memory:failures
- 34 Memory:failures
- 34 Memory:failures
- 34 DIMM:memory failures
- 35 2 configuration
- 36 chapter overview
- 36 chapter overview
- 36 • Workstation Configurations
- 36 • Workstation Configurations
- 36 • Field Replaceable Unit (FRU) Configurations
- 37 Configuration:workstation
- 37 Configuration:workstation
- 37 Configuration:workstation
- 37 http://hp.unixworkstations.com
- 38 Configuration:FRU
- 38 Configuration:FRU
- 38 Configuration:FRU
- 38 internal storage configurations
- 38 internal storage configurations
- 38 Configuration:hard disk drive
- 38 Configuration:hard disk drive
- 38 Configuration:hard disk drive
- 38 NOTE There must ALWAYS be a terminator at both ends of a SCSI bus. This means one internal termin...
- 38 <TABLE>
- 38 Table21. Default Device IDs TABLE
- 38 <TABLE HEADING>
- 38 <TABLE ROW>
- 38 Ultra2 Wide Low-Voltage Differential SCSI
- 38 <TABLE BODY>
- 38 <TABLE ROW>
- 38 1st Hard Disk Drive
- 38 ID6
- 38 <TABLE ROW>
- 38 2nd Hard Disk Drive
- 38 ID5
- 38 <TABLE ROW>
- 38 DDS Drive, external optional device
- 38 ID3
- 38 <TABLE ROW>
- 38 ** Do not assign SCSI ID7 to any internal storage device.
- 39 Figure21. Hard Drive, 9Gbyte/18Gbyte Ultra2 Low Voltage Differential
- 39 Figure21. Hard Drive, 9Gbyte/18Gbyte Ultra2 Low Voltage Differential
- 39 Configuration:hard disk drive:SAM
- 39 Configuration:hard disk drive:SAM
- 39 Configuration:hard disk drive:SAM
- 39 1. Log in as
- 39 1. Log in as
- 39 2. Move the mouse pointer to the Application Manager control for tools and click the left mouse b...
- 40 3. Click twice on the
- 40 4. Click twice on the
- 40 5. Double click on the
- 40 6. Double click on the
- 40 <GRAPHIC>
- 40 7. Click on
- 40 8. Enter the mount directory name in the Mount Directory field of the Add Disk window and click o...
- 42 Configuration:CD Drive
- 42 Configuration:CD Drive
- 42 Configuration:CD Drive
- 42 CAUTION CD-ROM drives are susceptible to mechanical and electrostatic shock. When handling the dr...
- 42 Figure22. CD Drive Jumper Setting (Rear View)
- 42 Figure22. CD Drive Jumper Setting (Rear View)
- 42 Configuration:floppy disk drive
- 42 Configuration:floppy disk drive
- 42 Configuration:floppy disk drive
- 42 CAUTION Floppy disk drives are susceptible to mechanical and electrostatic shock. When handling t...
- 43 Configuration:memory
- 43 Configuration:memory
- 43 Configuration:memory
- 43 Figure23. Memory Connectors
- 43 Figure23. Memory Connectors
- 43 CAUTION The memory cards must be installed in the correct order, else the system will not boot pr...
- 44 NOTE Users who wish to achieve both maximum performance and maximum future capacity are advised t...
- 45 Configuration:I/O cards
- 45 Configuration:I/O cards
- 45 Configuration:I/O cards
- 45 Figure24. PCI Card Slot Numbering and Capabilities
- 45 Figure24. PCI Card Slot Numbering and Capabilities
- 45 NOTE If you connect your monitor to a different graphics card slot, you will need to change the g...
- 46 • 19-inch, 1280¥1024 color monitor, 75 Hz (A4575A)
- 46 • 19-inch, 1280¥1024 color monitor, 75 Hz (A4575A)
- 46 • 19-inch, 1600¥1200 color monitor, 75 Hz (A4575A)
- 46 • 21-inch, 1280¥1024 color monitor (stereo capability), 75 Hz (A4576A)
- 46 • 21-inch, 1600¥1200 color monitor, 75 Hz (A4576A)
- 46 Monitor:unsupported
- 46 Monitor:unsupported
- 46 NOTE The HP workstation c-class supports a maximum of four Visualize-EG graphics cards with four ...
- 47 3 troubleshooting
- 48 http://wojo.rose.hp.com/
- 49 flow diagrams for troubleshooting
- 49 flow diagrams for troubleshooting
- 49 NOTE For the system to power up, the left side panel must be properly seated in the mainframe cha...
- 50 Figure31. Power On LCD, Troubleshooting Flow
- 50 Figure31. Power On LCD, Troubleshooting Flow
- 51 troubleshooting:console
- 51 troubleshooting:console
- 51 troubleshooting:console
- 52 troubleshooting:bootable device
- 52 troubleshooting:bootable device
- 52 troubleshooting:bootable device
- 53 troubleshooting:HP-UX Boot
- 53 troubleshooting:HP-UX Boot
- 53 troubleshooting:HP-UX Boot
- 54 troubleshooting:LCD
- 54 troubleshooting:LCD
- 54 troubleshooting:LCD
- 54 FLT A hardware error has been detected
- 54 TST Hardware being tested
- 54 SHU System being shutdown
- 54 INI Hardware being initialized
- 54 WRN A non-optimal operating condition exists
- 54 RUN Computer is running operating system
- 54 ZZZ Three character chassis code
- 54 YYYY Four digit hexadecimal code
- 54 FFFFFF Six character field replaceable unit description
- 54 WWWWWWWWWWWWWWWW Description of the chassis code
- 54 FLT
- 54 30FC
- 54 SYS BD
- 54 bad sys bd id
- 55 troubleshooting:fan failures and warnings
- 55 troubleshooting:fan failures and warnings
- 55 troubleshooting:fan failures and warnings
- 55 <TABLE>
- 55 Table31. Fan Numbers and Corresponding Name
- 55 <TABLE HEADING>
- 55 <TABLE ROW>
- 55 Fan Number
- 55 Name of the Fan
- 55 <TABLE BODY>
- 55 <TABLE ROW>
- 55 1
- 55 (not used)
- 55 <TABLE ROW>
- 55 2
- 55 Lower System Fan
- 55 <TABLE ROW>
- 55 3
- 55 Upper System Fan
- 55 <TABLE ROW>
- 55 4
- 55 PCI Card Fan
- 55 <TABLE ROW>
- 55 5
- 55 Turbo Cooler Fan, CPU
- 55 <TABLE ROW>
- 55 6
- 55 Disk/Memory Fan
- 55 <TABLE>
- 55 <TABLE BODY>
- 55 <TABLE ROW>
- 55 WRN D014 SYS BD
- 55 WRN D014 SYS BD
- 55 <TABLE ROW>
- 55 fan 4: failure!
- 55 fan 4: failure!
- 56 Figure35. Fan Locations
- 56 Figure35. Fan Locations
- 56 • The fan itself, if it is either a system board cooling fan, PCI (I/O) fan, or a memory fan.
- 56 • The fan itself, if it is either a system board cooling fan, PCI (I/O) fan, or a memory fan.
- 56 • The entire system board tray assembly, if it is a turbo cooler fan (that is, a fan mounted on a...
- 57 troubleshooting:boot failure
- 57 troubleshooting:boot failure
- 57 troubleshooting:boot failure
- 58 troubleshooting:bootable media
- 58 troubleshooting:bootable media
- 58 troubleshooting:bootable media
- 58 Main Menu: Enter a command or a menu > search ipl
- 58 • To hold the display temporarily, press
- 58 • To hold the display temporarily, press
- 58 • To continue the display, press
- 58 • To halt the search, press
- 58 Main Menu: Enter a command > search ipl device_type
- 58 • fwscsi
- 58 • fwscsi
- 58 • fwscsi
- 58 • scsi
- 58 • scsi
- 58 • lan
- 58 • lan
- 58 • ide
- 58 • ide
- 58 • pcin
- 58 • pcin
- 58 stable storage
- 58 stable storage
- 59 boot command notations
- 59 boot command notations
- 59 boot command notations
- 59 • Mnemonic
- 59 • Mnemonic
- 59 • Path number
- 59 • boot
- 59 • boot
- 59 • boot
- 59 • boot
- 59 • boot
- 59 • boot p1
- 59 • boot p1
- 59 • boot p1
- 59 supported boot paths
- 59 supported boot paths
- 59 ISL:environment
- 59 ISL:environment
- 59 ISL:environment
- 59 • Execute user-entered commands to modify boot device paths and boot options in stable storage.
- 59 • Execute user-entered commands to modify boot device paths and boot options in stable storage.
- 59 • Run off-line diagnostic programs and utilities.
- 59 • Provide automatic booting of the HP-UX operating system after power-on or reset.
- 60 troubleshooting:selftest failures
- 60 troubleshooting:selftest failures
- 60 troubleshooting:selftest failures
- 60 1. Using
- 60 1. Using
- 60 2. To get additional information about failures from the Boot Console Handler, use the Service Me...
- 61 troubleshooting:chassis codes
- 61 troubleshooting:chassis codes
- 61 troubleshooting:chassis codes
- 61 Table 32.
- 61 <TABLE>
- 61 Table32. Chassis Codes for th HP Workstation C-Class
- 61 <TABLE HEADING>
- 61 <TABLE ROW>
- 61 Ostat
- 61 Code
- 61 FRU
- 61 Message
- 61 Description
- 61 <TABLE BODY>
- 61 <TABLE ROW>
- 61 FLT
- 61 1n01
- 61 SYS BD
- 61 HPMC occurred
- 61 CPU n detected an unexpected HPMC.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n02
- 61 SYS BD
- 61 powerfail intrpt
- 61 CPU n detected an unexpected power fail interrupt.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n03
- 61 SYS BD
- 61 recvry cntr trap
- 61 CPU n detected an unexpected recovery counter trap.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n04
- 61 SYS BD
- 61 external intrrpt
- 61 CPU n detected an unexpected external interrupt.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n05
- 61 SYS BD
- 61 LPMC occurred
- 61 CPU n detected an unexpected LPMC.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n06
- 61 SYS BD
- 61 ITLB mis/Ipg flt
- 61 CPU n detected an unexpected ITLB miss or instruction page fault.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n07
- 61 SYS BD
- 61 I mem prot trap
- 61 CPU n detected an unexpected instruction memory protection trap.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n08
- 61 SYS BD
- 61 illegal inst trp
- 61 CPU n detected an unexpected illegal instruction trap.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n09
- 61 SYS BD
- 61 break instr trap
- 61 CPU n detected an unexpected break instruction trap.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n0A
- 61 SYS BD
- 61 privilgd op trap
- 61 CPU n detected an unexpected privileged operation trap.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n0B
- 61 SYS BD
- 61 privlgd reg trap
- 61 CPU n detected an unexpected privileged register trap.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n0C
- 61 SYS BD
- 61 overflow trap
- 61 CPU n detected an unexpected overflow trap.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n0D
- 61 SYS BD
- 61 conditional trap
- 61 CPU n detected an unexpected conditional trap.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n0E
- 61 SYS BD
- 61 assist exep trap
- 61 CPU n detected an unexpected assist exception trap.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n0F
- 61 SYS BD
- 61 DTLB mis/Dpg flt
- 61 CPU n detected an unexpected DTLB miss or data page fault.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n10
- 61 SYS BD
- 61 non-acc ITLB mis
- 61 CPU n detected an unexpected non-access ITLB miss fault.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n11
- 61 SYS BD
- 61 non-acc DTLB mis
- 61 CPU n detected an unexpected non-access DTLB miss or data page fault.
- 61 <TABLE ROW>
- 61 FLT
- 61 1n12
- 61 SYS BD
- 61 data mem prot tr
- 61 CPU n detected an unexpected data memory protection trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n13
- 62 SYS BD
- 62 data mem brk trp
- 62 CPU n detected an unexpected data memory break trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n14
- 62 SYS BD
- 62 TLB dirty bit tr
- 62 CPU n detected an unexpected TLB dirty bit trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n15
- 62 SYS BD
- 62 page refrnce trp
- 62 CPU n detected an unexpected page reference trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n16
- 62 SYS BD
- 62 assist emul trap
- 62 CPU n detected an unexpected assist emulation trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n17
- 62 SYS BD
- 62 hi-priv xfer trp
- 62 CPU n detected an unexpected higher-privilege transfer trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n18
- 62 SYS BD
- 62 lo-priv xfer trp
- 62 CPU n detected an unexpected lower-privilege transfer trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n19
- 62 SYS BD
- 62 taken branch trp
- 62 CPU n detected an unexpected taken-branch trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n1A
- 62 SYS BD
- 62 data mem acc rts
- 62 CPU n detected an unexpected data memory access rights trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n1B
- 62 SYS BD
- 62 data mem prot ID
- 62 CPU n detected an unexpected data memory protection ID trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n1C
- 62 SYS BD
- 62 unalign data ref
- 62 CPU n detected an unexpected unaligned data reference trap.
- 62 <TABLE ROW>
- 62 FLT
- 62 1n1D
- 62 SYS BD
- 62 perf mon intrrpt
- 62 CPU n detected an unexpected performance monitor interrupt.
- 62 <TABLE ROW>
- 62 TST
- 62 1n20
- 62 SYS BD
- 62 CPUn basic test
- 62 CPU n is starting its basic operations self-test.
- 62 <TABLE ROW>
- 62 TST
- 62 1n21
- 62 SYS BD
- 62 CPUn alu test
- 62 CPU n is starting its arithmetic and logical unit self-test.
- 62 <TABLE ROW>
- 62 TST
- 62 1n22
- 62 SYS BD
- 62 CPUn branch test
- 62 CPU n is starting its branch instruction self-test.
- 62 <TABLE ROW>
- 62 TST
- 62 1n23
- 62 SYS BD
- 62 CPUn arith cond
- 62 CPU n is starting its arthimetic condition self-test.
- 62 <TABLE ROW>
- 62 TST
- 62 1n24
- 62 SYS BD
- 62 CPUn bit opers
- 62 CPU n is starting its bit operation instruction self-test.
- 62 <TABLE ROW>
- 62 TST
- 62 1n25
- 62 SYS BD
- 62 CPUn cntrl regs
- 62 CPU n is starting its control register self-test.
- 62 <TABLE ROW>
- 62 TST
- 62 1n26
- 62 SYS BD
- 62 CPUn ext intrpt
- 62 CPU n is starting its external interrupt self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1n27
- 63 SYS BD
- 63 CPUn itimer test
- 63 CPU n is starting its interval timer self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1n28
- 63 SYS BD
- 63 CPUn multi-media
- 63 CPU n is starting its multi-media instructions self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1n29
- 63 SYS BD
- 63 CPUn shadow reg
- 63 CPU n is starting its shadow register self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1n2A
- 63 SYS BD
- 63 CPUn diagnse reg
- 63 CPU n is starting its diagnose register self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1n2B
- 63 SYS BD
- 63 CPUn rdr test
- 63 CPU n is starting its remote diagnose register self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1n2C
- 63 SYS BD
- 63 CPUn bypass test
- 63 CPU n is starting its integer bypass operation self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1n30
- 63 SYS BD
- 63 CPUn start est
- 63 CPU n is starting its early (pre-memory) self-tests.
- 63 <TABLE ROW>
- 63 WRN
- 63 1n31
- 63 SYS BD
- 63 CPUn skip est
- 63 CPU n is bypassing its early self-tests to save time.
- 63 <TABLE ROW>
- 63 FLT
- 63 1n32
- 63 SYS BD
- 63 CPUn bad tst mod
- 63 CPU n detected an unsupported system mode.
- 63 <TABLE ROW>
- 63 INI
- 63 1n3C
- 63 SYS BD
- 63 CPUn initialize
- 63 CPU n is initializing after self-tests.
- 63 <TABLE ROW>
- 63 TST
- 63 1n3E
- 63 SYS BD
- 63 CPUn exit est
- 63 CPU n finished its early self-tests.
- 63 <TABLE ROW>
- 63 TST
- 63 1nA0
- 63 SYS BD
- 63 CPUn fpu tests
- 63 CPU n is starting its floating-point unit self-tests.
- 63 <TABLE ROW>
- 63 TST
- 63 1nA1
- 63 SYS BD
- 63 CPUn fpu reg tst
- 63 CPU n is starting its floating-point register self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1nA2
- 63 SYS BD
- 63 CPUn fpu inst
- 63 CPU n is starting its floating-point instruction self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1nA3
- 63 SYS BD
- 63 CPUn fpu traps
- 63 CPU n is starting its floating-point trap self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1nA4
- 63 SYS BD
- 63 CPUn fpu misc
- 63 CPU n is starting its floating-point miscellaneous operations self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1nA5
- 63 SYS BD
- 63 CPUn fpu bypass
- 63 CPU n is starting its floating-point bypassing self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1nB1
- 63 SYS BD
- 63 CPUn TLB RAM tst
- 63 CPU n is starting its TLB register self-test.
- 63 <TABLE ROW>
- 63 TST
- 63 1nB2
- 63 SYS BD
- 63 CPUn TLB trans
- 63 CPU n is starting its TLB translation self-test.
- 64 <TABLE ROW>
- 64 FLT
- 64 1nBA
- 64 SYS BD
- 64 monarch CPU fail
- 64 The monarch CPU failed.
- 64 <TABLE ROW>
- 64 FLT
- 64 1nBB
- 64 SYS BD
- 64 bad CPUn number
- 64 The CPU identifier was out of range.
- 64 <TABLE ROW>
- 64 FLT
- 64 1nBF
- 64 SYS BD
- 64 CPUn halt boot
- 64 Bootstrap failure--machine halted.
- 64 <TABLE ROW>
- 64 INI
- 64 1nCA
- 64 SYS BD
- 64 CPUn sys bus arb
- 64 Monarch CPU is initializing the system bus arbitration.
- 64 <TABLE ROW>
- 64 WRN
- 64 1nCD
- 64 SYS BD
- 64 CPUn deconfig
- 64 CPU n deconfigured itself.
- 64 <TABLE ROW>
- 64 WRN
- 64 1nCE
- 64 SYS BD
- 64 CPUn extinguish
- 64 PDC_PROC halted CPU n.
- 64 <TABLE ROW>
- 64 FLT
- 64 1nCF
- 64 SYS BD
- 64 slaven failed
- 64 Slave CPU n failed self-test.
- 64 <TABLE ROW>
- 64 WRN
- 64 1mDs
- 64 SYS BD
- 64 slaves deconfig
- 64 Monarch CPU m deconfigured slave CPU s.
- 64 <TABLE ROW>
- 64 WRN
- 64 1nEF
- 64 SYS BD
- 64 CPUn slftst warn
- 64 CPU n detected a non-fatal error during its self-tests.
- 64 <TABLE ROW>
- 64 WRN
- 64 1mFs
- 64 SYS BD
- 64 monm stop slaves
- 64 Monarch CPU m halted slave CPU s.
- 64 <TABLE ROW>
- 64 INI
- 64 1nFC
- 64 SYS BD
- 64 CPUn sync’ing
- 64 CPU n is synchronizing with the rest of the system.
- 64 <TABLE ROW>
- 64 INI
- 64 1nFD
- 64 SYS BD
- 64 CPUn stat wd tst
- 64 CPU n is testing the system status word.
- 64 <TABLE ROW>
- 64 FLT
- 64 1nFF
- 64 SYS BD
- 64 monarchn selftst
- 64 Monarch CPU n failed self-test.
- 64 <TABLE ROW>
- 64 TST
- 64 2n20
- 64 SYS BD
- 64 CPUn icache RAM
- 64 CPU n is starting its instruction cache RAM self-test.
- 64 <TABLE ROW>
- 64 FLT
- 64 2n25
- 64 SYS BD
- 64 CPUn ic ld d err
- 64 CPU n detected a data error during data cache load.
- 64 <TABLE ROW>
- 64 FLT
- 64 2n26
- 64 SYS BD
- 64 CPUn ic ld t err
- 64 CPU n detected a tag error during data cache load.
- 64 <TABLE ROW>
- 64 TST
- 64 2n30
- 64 SYS BD
- 64 CPUn icache tag
- 64 CPU n is starting its instruction cache tag self-test.
- 64 <TABLE ROW>
- 64 TST
- 64 2n40
- 64 SYS BD
- 64 CPUn icache par
- 64 CPU n is starting its instruction cache parity detection self-test.
- 64 <TABLE ROW>
- 64 TST
- 64 2n50
- 64 SYS BD
- 64 CPUn dc stor que
- 64 CPU n is starting its data cache store queue self-test.
- 64 <TABLE ROW>
- 64 FLT
- 64 2n51
- 64 SYS BD
- 64 CPUn dc st q err
- 64 CPU n detected an error during its data cache store queue self-test.
- 64 <TABLE ROW>
- 64 TST
- 64 2n70
- 64 SYS BD
- 64 CPUn dcache RAM
- 64 CPU n is starting its data cache RAM self-test.
- 64 <TABLE ROW>
- 64 TST
- 64 2n80
- 64 SYS BD
- 64 CPUn dcache tag
- 64 CPU n is starting its data cache tag self-test.
- 65 <TABLE ROW>
- 65 TST
- 65 2n90
- 65 SYS BD
- 65 CPUn dcache ECC
- 65 CPU n is starting its data cache ECC self-test.
- 65 <TABLE ROW>
- 65 FLT
- 65 2BAD
- 65 SYS BD
- 65 assertion fail
- 65 A firmware assertion failed.
- 65 <TABLE ROW>
- 65 TST
- 65 3n00
- 65 SYS BD
- 65 ROM checksum tst
- 65 Monarch CPU n is testing the boot ROM integrity.
- 65 <TABLE ROW>
- 65 FLT
- 65 3n00
- 65 SYS BD
- 65 ROM checksum BAD
- 65 The boot ROM failed checksum.
- 65 <TABLE ROW>
- 65 INI
- 65 3n00
- 65 SYS BD
- 65 ROM checksum ok
- 65 The boot ROM passed checksum.
- 65 <TABLE ROW>
- 65 TST
- 65 3n01
- 65 SYS BD
- 65 PDH control test
- 65 Monarch CPU n is testing PDH control register.
- 65 <TABLE ROW>
- 65 INI
- 65 3n01
- 65 SYS BD
- 65 PDH control init
- 65 Monarch CPU n is initializing the PDH control register.
- 65 <TABLE ROW>
- 65 FLT
- 65 3n01
- 65 SYS BD
- 65 PDH control err
- 65 Monarch CPU n detected an error in the PDH control register.
- 65 <TABLE ROW>
- 65 TST
- 65 3n02
- 65 SYS BD
- 65 scratch RAM test
- 65 Monarch CPU n is testing scratch RAM.
- 65 <TABLE ROW>
- 65 INI
- 65 3n02
- 65 SYS BD
- 65 scratch RAM ok
- 65 The scratch RAM test failed.
- 65 <TABLE ROW>
- 65 FLT
- 65 3n02
- 65 SYS BD
- 65 scratch RAM bad
- 65 The scratch RAM test passed.
- 65 <TABLE ROW>
- 65 WRN
- 65 3n03
- 65 SYS BD
- 65 stbl st read err
- 65 CPU n detected a non-fatal error reading the stable store.
- 65 <TABLE ROW>
- 65 FLT
- 65 3n03
- 65 SYS BD
- 65 stbl st read err
- 65 CPU n detected a non-fatal error reading the stable store.
- 65 <TABLE ROW>
- 65 INI
- 65 3nC4
- 65 SYS BD
- 65 clearing EEPROM
- 65 Monarch CPU n is clearing the EEPROM.
- 65 <TABLE ROW>
- 65 INI
- 65 3nD4
- 65 SYS BD
- 65 deflting EEPROM2
- 65 Monarch CPU n is initializing the EEPROM to system defaults.
- 65 <TABLE ROW>
- 65 WRN
- 65 3n04
- 65 SYS BD
- 65 EEPROM write err
- 65 CPU n detected a non-fatal error writing the EEPROM.
- 65 <TABLE ROW>
- 65 FLT
- 65 3n04
- 65 SYS BD
- 65 EEPROM write err
- 65 CPU n detected a fatal error writing the EEPROM.
- 65 <TABLE ROW>
- 65 FLT
- 65 3n05
- 65 SYS BD
- 65 EEPROM wrt limit
- 65 CPU n detected a fatal error writing the EEPROM.
- 65 <TABLE ROW>
- 65 WRN
- 65 3n06
- 65 SYS BD
- 65 EEPROM read err
- 65 CPU n detected a non-fatal error reading the EEPROM.
- 65 <TABLE ROW>
- 65 FLT
- 65 3n06
- 65 SYS BD
- 65 EEPROM read err
- 65 CPU n detected a fatal error reading the EEPROM.
- 65 <TABLE ROW>
- 65 INI
- 65 3n07
- 65 SYS BD
- 65 CPUn invoke LDB
- 65 CPU n is starting the low-level debugger.
- 66 <TABLE ROW>
- 66 FLT
- 66 3n09
- 66 SYS BD
- 66 bad sys mde byte
- 66 CPU n detected an unsupported system mode.
- 66 <TABLE ROW>
- 66 WRN
- 66 3n1A
- 66 SYS BD
- 66 hversion mismtch
- 66 Stable store hardware version doesn’t match system.
- 66 <TABLE ROW>
- 66 TST
- 66 3n1B
- 66 SYS BD
- 66 chck model strng
- 66 Check model string with version in stable store.
- 66 <TABLE ROW>
- 66 WRN
- 66 3n1B
- 66 SYS BD
- 66 model str msmtch
- 66 Model string doesn’t match that in stable store.
- 66 <TABLE ROW>
- 66 FLT
- 66 3n1B
- 66 SYS BD
- 66 fatal model str
- 66 Error reading model string from stable store.
- 66 <TABLE ROW>
- 66 TST
- 66 3n1C
- 66 SYS BD
- 66 test software ID
- 66 Check LANIC address.
- 66 <TABLE ROW>
- 66 WRN
- 66 3n1C
- 66 SYS BD
- 66 update sw ID
- 66 Update LANIC address.
- 66 <TABLE ROW>
- 66 FLT
- 66 3n1C
- 66 SYS BD
- 66 update sw ID err
- 66 Error updating LANIC address.
- 66 <TABLE ROW>
- 66 INI
- 66 3n2s
- 66 SYS BD
- 66 Invoke LDB: s
- 66 CPU n is awaiting the low-level debugger for s more seconds.
- 66 <TABLE ROW>
- 66 FLT
- 66 FLT
- 66 3nBC
- 66 3nBC
- 66 IO BD
- 66 IO BD
- 66 tick timeout
- 66 tick timeout
- 66 The real-time clock is ticking too slowly or not at all.
- 66 <TABLE ROW>
- 66 TST
- 66 3nBC
- 66 IO BD
- 66 test sys clocks
- 66 CPU n is verifying processor clocks with the real-time clock.
- 66 <TABLE ROW>
- 66 INI
- 66 3nBC
- 66 SYS BD
- 66 init sys clocks
- 66 CPU n has initialized the processor clocks.
- 66 <TABLE ROW>
- 66 FLT
- 66 3nCD
- 66 IO BD
- 66 RTC tick timeout
- 66 The real time clock is ticking too slowly or not at all.
- 66 <TABLE ROW>
- 66 TST
- 66 3nCD
- 66 SYS BD
- 66 check defaults
- 66 CPU n is initializing stable store values to system defaults.
- 66 <TABLE ROW>
- 66 INI
- 66 3nCD
- 66 SYS BD
- 66 init defaults
- 66 CPU n finished initializing stable store values.
- 66 <TABLE ROW>
- 66 FLT
- 66 3nCD
- 66 SYS BD
- 66 init EEPROM err
- 66 CPU n detected an error writing to stable store.
- 66 <TABLE ROW>
- 66 FLT
- 66 3nEC
- 66 SYS BD
- 66 bad sys config
- 66 CPU n detected an illegal CPU board configuration.
- 66 <TABLE ROW>
- 66 FLT
- 66 3nF4
- 66 SYS BD
- 66 EEPROM boot limt
- 66 CPU n detected a fatal error writing the EEPROM.
- 66 <TABLE ROW>
- 66 FLT
- 66 3nFC
- 66 SYS BD
- 66 bad sys bd id
- 66 CPU n cannot identify CPU board.
- 66 <TABLE ROW>
- 66 TST
- 66 4n00
- 66 SYS BD
- 66 CPUn start lst
- 66 CPU n is starting its late (with memory) self-tests.
- 67 <TABLE ROW>
- 67 WRN
- 67 4n01
- 67 SYS BD
- 67 CPUn skip lst
- 67 CPU n is bypassing its late self-tests to save time.
- 67 <TABLE ROW>
- 67 TST
- 67 4n0E
- 67 SYS BD
- 67 CPUn exit lst
- 67 CPU n finished its late self-tests.
- 67 <TABLE ROW>
- 67 TST
- 67 4n20
- 67 SYS BD
- 67 CPUn lst erly st
- 67 CPU n is re-executing some of its early self-tests from system memory.
- 67 <TABLE ROW>
- 67 TST
- 67 4n21
- 67 SYS BD
- 67 CPUn lst basic
- 67 CPU n is re-executing its basic operations self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n22
- 67 SYS BD
- 67 CPUn lst alu
- 67 CPU n is re-executing its arithmetic and logic unit self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n23
- 67 SYS BD
- 67 CPUn lst branch
- 67 CPU n is re-executing its branch instruction self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n24
- 67 SYS BD
- 67 CPUn lst arth cd
- 67 CPU n is re-executing its arithmetic conditions self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n25
- 67 SYS BD
- 67 CPUn lst bit ops
- 67 CPU n is re-executing its bit operations self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n26
- 67 SYS BD
- 67 CPUn lst ctl reg
- 67 CPU n is re-executing its control register self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n27
- 67 SYS BD
- 67 CPUn lst ext int
- 67 CPU n is re-executing its external interrupt self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n28
- 67 SYS BD
- 67 CPUn lst itimer
- 67 CPU n is re-executing its interval timer self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n29
- 67 SYS BD
- 67 CPUn lst mltimed
- 67 CPU n is re-executing its multi-media instructions self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n2A
- 67 SYS BD
- 67 CPUn lst shadow
- 67 CPU n is re-executing its shadow register self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n2B
- 67 SYS BD
- 67 CPUn lst dg regs
- 67 CPU n is re-executing its diagnose register self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n2C
- 67 SYS BD
- 67 CPUn lst rdrs
- 67 CPU n is re-executing its remote diagnose register self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n2D
- 67 SYS BD
- 67 CPUn lst bypass
- 67 CPU n is re-executing its integer bypass operation self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n30
- 67 SYS BD
- 67 CPUn cache byte
- 67 CPU n is starting its data cache sub-word operations self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n40
- 67 SYS BD
- 67 CPUn cache flush
- 67 CPU n is starting its cache flush self-test.
- 67 <TABLE ROW>
- 67 TST
- 67 4n50
- 67 SYS BD
- 67 CPUn icache miss
- 67 CPU n is starting its instruction cache miss self-test.
- 68 <TABLE ROW>
- 68 TST
- 68 4n60
- 68 SYS BD
- 68 CPUn dcache miss
- 68 CPU n is starting its data cache miss self-test.
- 68 <TABLE ROW>
- 68 FLT
- 68 5n00
- 68 SYS BD
- 68 unknown bus err
- 68 CPU n detected an unknown error on the system bus (Runway).
- 68 <TABLE ROW>
- 68 FLT
- 68 5n02
- 68 SYS BD
- 68 path err assertd
- 68 CPU n detected a path error on the system bus (Runway).
- 68 <TABLE ROW>
- 68 FLT
- 68 5n04
- 68 SYS BD
- 68 data parity err
- 68 CPU n detected a data, address, or control parity error on the system bus (Runway).
- 68 <TABLE ROW>
- 68 FLT
- 68 5n07
- 68 SYS BD
- 68 Runway dir error
- 68 CPU n detected a directed error on the system bus (Runway).
- 68 <TABLE ROW>
- 68 FLT
- 68 5n08
- 68 SYS BD
- 68 Runway broad err
- 68 CPU n detected a broadcast error on the system bus (Runway).
- 68 <TABLE ROW>
- 68 FLT
- 68 5n0A
- 68 SYS BD
- 68 illegal response
- 68 CPU n received data that did not match any outstanding data request.
- 68 <TABLE ROW>
- 68 FLT
- 68 5n0B
- 68 SYS BD
- 68 bus timeout
- 68 CPU n timed out before receiving requested data. The responder is logged in the system responder ...
- 68 <TABLE ROW>
- 68 FLT
- 68 5n0C
- 68 SYS BD
- 68 CPU sync failure
- 68 CPU n’s synchronizer detected a rule violation on the system bus (Runway).
- 68 <TABLE ROW>
- 68 INI
- 68 7000
- 68 DIMM
- 68 start DIMM scan
- 68 Start looking for installed DIMMs.
- 68 <TABLE ROW>
- 68 INI
- 68 7002
- 68 SYS BD
- 68 init mem tables
- 68 Initialize memory data structures.
- 68 <TABLE ROW>
- 68 FLT
- 68 7004
- 68 SYS BD
- 68 mem plt upd fail
- 68 Error updating memory platform data.
- 68 <TABLE ROW>
- 68 FLT
- 68 7005
- 68 DIMM
- 68 insufficient mem
- 68 Insufficient memory detected to continue.
- 68 <TABLE ROW>
- 68 TST
- 68 7010
- 68 DIMM
- 68 check DIMM order
- 68 Start memory DIMM order check.
- 68 <TABLE ROW>
- 68 WRN
- 68 7011
- 68 DIMM
- 68 skip DIMM ord ck
- 68 Bypass memory DIMM order check.
- 68 <TABLE ROW>
- 68 FLT
- 68 7012
- 68 DIMM
- 68 DIMM order error
- 68 Memory DIMMs are not in the proper order.
- 68 <TABLE ROW>
- 68 FLT
- 68 7013
- 68 DIMM
- 68 DIMM order error
- 68 Memory DIMMs are not in the proper order. As a result, the system cannot access one or more DIMMs...
- 68 <TABLE ROW>
- 68 TST
- 68 7016
- 68 DIMM
- 68 DIMM pair check
- 68 Start memory DIMM pair check (DIMMs in a pair (e.g. 0a/0b) must match in J7000).
- 68 <TABLE ROW>
- 68 WRN
- 68 7017
- 68 DIMM
- 68 skip mem pair ck
- 68 Bypass memory DIMM set check.
- 68 <TABLE ROW>
- 68 FLT
- 68 701F
- 68 DIMM
- 68 no memory found
- 68 Memory scan couldn’t find any DIMMs.
- 69 <TABLE ROW>
- 69 TST
- 69 7020
- 69 SYS BD
- 69 search for IMM
- 69 Try to find a single memory bank to use for the initial memory module.
- 69 <TABLE ROW>
- 69 TST
- 69 703s
- 69 DIMM
- 69 DIMM s IMM vrfy
- 69 DIMM s was the initial memory module last boot. Verify it still works.
- 69 <TABLE ROW>
- 69 FLT
- 69 704s
- 69 DIMM
- 69 DIMM s IMM fail
- 69 DIMM s failed the initial memory module test.
- 69 <TABLE ROW>
- 69 TST
- 69 705s
- 69 DIMM
- 69 DIMM s IMM test
- 69 Test DIMM in slot s as the initial memory module.
- 69 <TABLE ROW>
- 69 INI
- 69 706s
- 69 DIMM
- 69 DIMM s is IMM
- 69 DIMM s chosen as initial memory module.
- 69 <TABLE ROW>
- 69 INI
- 69 70F0
- 69 DIMM
- 69 DIMM scan done
- 69 Memory DIMM scan complete.
- 69 <TABLE ROW>
- 69 TST
- 69 7100
- 69 SYS BD
- 69 mem register tst
- 69 Start testing registers in memory controller.
- 69 <TABLE ROW>
- 69 WRN
- 69 7101
- 69 SYS BD
- 69 skip mem reg tst
- 69 Bypass the memory controller register test.
- 69 <TABLE ROW>
- 69 FLT
- 69 7102
- 69 SYS BD
- 69 mem addr reg tst
- 69 Firmware detected an error in the memory controller address registers.
- 69 <TABLE ROW>
- 69 FLT
- 69 7103
- 69 SYS BD
- 69 mem mbat reg tst
- 69 Firmware detected an error in the memory controller bank registers.
- 69 <TABLE ROW>
- 69 FLT
- 69 7104
- 69 SYS BD
- 69 mem reg tst fail
- 69 Firmware detected an error in the memory controller memory registers.
- 69 <TABLE ROW>
- 69 FLT
- 69 7105
- 69 SYS BD
- 69 mem err reg test
- 69 Firmware detected an error in the memory controller error registers.
- 69 <TABLE ROW>
- 69 FLT
- 69 7106
- 69 SYS BD
- 69 mem err clr fail
- 69 Firmware was unable to clear the error registers after testing.
- 69 <TABLE ROW>
- 69 INI
- 69 7200
- 69 DIMM
- 69 strt DIMM detect
- 69 Start the Serial Presence Detection (SPD) to search for memory DIMMs.
- 69 <TABLE ROW>
- 69 INI
- 69 7201
- 69 DIMM
- 69 DIMM detect x%
- 69 SPD is x% finished.
- 69 <TABLE ROW>
- 69 WRN
- 69 7202
- 69 SYS BD
- 69 skip DIMM detect
- 69 Bypass Serial Presence Detection.
- 69 <TABLE ROW>
- 69 FLT
- 69 7203
- 69 DIMM
- 69 unsupp DIMM type
- 69 SPD found an unsupported DIMM type.
- 69 <TABLE ROW>
- 69 FLT
- 69 7204
- 69 DIMM
- 69 SPD fatal error
- 69 SPD detected an unexpected, fatal error.
- 69 <TABLE ROW>
- 69 INI
- 69 7205
- 69 DIMM
- 69 add HP DIMM type
- 69 New HP manufactured DIMM type added to tables.
- 69 <TABLE ROW>
- 69 INI
- 69 7206
- 69 DIMM
- 69 non-HP DIMM type
- 69 New non-HP DIMM type added to tables (use at own risk).
- 70 <TABLE ROW>
- 70 FLT
- 70 7207
- 70 DIMM
- 70 DIMM table full
- 70 The DIMM table is full--cannot add new type.
- 70 <TABLE ROW>
- 70 FLT
- 70 7208
- 70 DIMM
- 70 no DIMMs found
- 70 SPD didn’t find any memory DIMMs.
- 70 <TABLE ROW>
- 70 INI
- 70 721s
- 70 DIMM
- 70 is DIMM s inst?
- 70 SPD is checking memory slot s.
- 70 <TABLE ROW>
- 70 INI
- 70 722s
- 70 DIMM
- 70 ???? DIMM in s
- 70 SPD found a DIMM in slot s, but can’t determine its size. DIMM will not be used.
- 70 <TABLE ROW>
- 70 INI
- 70 723s
- 70 DIMM
- 70 128M DIMM in s
- 70 SPD found a 128MB DIMM in slot s.
- 70 <TABLE ROW>
- 70 INI
- 70 724s
- 70 DIMM
- 70 256M DIMM in s
- 70 SPD found a 256MB DIMM in slot s.
- 70 <TABLE ROW>
- 70 INI
- 70 725s
- 70 DIMM
- 70 512M DIMM in s
- 70 SPD found a 512MB DIMM in slot s.
- 70 <TABLE ROW>
- 70 FLT
- 70 72As
- 70 DIMM
- 70 DIMM s checksum
- 70 DIMM in slot s failed SPD checksum and will not be used.
- 70 <TABLE ROW>
- 70 FLT
- 70 72Cs
- 70 DIMM
- 70 DIMM s mismatch
- 70 DIMM in slot s didn’t match the other in pair. (J7000 only--DIMMs must be in matched pairs.)
- 70 <TABLE ROW>
- 70 FLT
- 70 72Ds
- 70 DIMM
- 70 DIMM s load err
- 70 Memory DIMMs are not in the proper order. As a result, the system cannot access DIMM s and has de...
- 70 <TABLE ROW>
- 70 INI
- 70 7300
- 70 SYS BD
- 70 mem config start
- 70 Starting main memory configuration.
- 70 <TABLE ROW>
- 70 TST
- 70 7301
- 70 SYS BD
- 70 SYS BD
- 70 check mem config
- 70 Checking for memory configuration change since last boot.
- 70 <TABLE ROW>
- 70 WRN
- 70 7302
- 70 SYS BD
- 70 SYS BD
- 70 mem confg changd
- 70 mem confg changd
- 70 Memory physical configuration changed since last boot.
- 70 <TABLE ROW>
- 70 INI
- 70 INI
- 70 7303
- 70 7303
- 70 SYS BD
- 70 SYS BD
- 70 use saved config
- 70 use saved config
- 70 Memory physical configuration didn’t change. Use stored configuration data.
- 70 <TABLE ROW>
- 70 INI
- 70 INI
- 70 7304
- 70 7304
- 70 SYS BD
- 70 SYS BD
- 70 build mem intrlv
- 70 build mem intrlv
- 70 Building memory configuration with all DIMMs interleaved.
- 70 <TABLE ROW>
- 70 INI
- 70 INI
- 70 7305
- 70 7305
- 70 SYS BD
- 70 SYS BD
- 70 save mem config
- 70 save mem config
- 70 Saving memory configuration information in non-volatile memory.
- 70 <TABLE ROW>
- 70 WRN
- 70 7306
- 70 SYS BD
- 70 use alt mem conf
- 70 Memory will be configured from fixed values, instead of detected DIMMs.
- 70 <TABLE ROW>
- 70 INI
- 70 7307
- 70 SYS BD
- 70 interleve memory
- 70 Generating the memory interleave.
- 70 <TABLE ROW>
- 70 FLT
- 70 7308
- 70 SYS BD
- 70 PDT is disabled
- 70 Firmware detected bad memory pages, but the Page Deallocation Table is disabled.
- 70 <TABLE ROW>
- 70 FLT
- 70 7309
- 70 DIMM
- 70 insufficient mem
- 70 Insufficient error-free memory to continue.
- 71 <TABLE ROW>
- 71 FLT
- 71 730C
- 71 SYS BD
- 71 mem intrlv fail
- 71 Memory interleave generation failed.
- 71 <TABLE ROW>
- 71 INI
- 71 730F
- 71 SYS BD
- 71 mem config done
- 71 Main memory configuration complete.
- 71 <TABLE ROW>
- 71 TST
- 71 7400
- 71 DIMM
- 71 non-dest mem tst
- 71 Starting non-destructive memory test.
- 71 <TABLE ROW>
- 71 TST
- 71 740F
- 71 DIMM
- 71 non-dst tst done
- 71 Non-destructive memory test complete.
- 71 <TABLE ROW>
- 71 INI
- 71 7500
- 71 SYS BD
- 71 memory reset
- 71 Resetting memory system.
- 71 <TABLE ROW>
- 71 WRN
- 71 7501
- 71 SYS BD
- 71 mem log clr warn
- 71 Memory error logs didn’t clear on first try.
- 71 <TABLE ROW>
- 71 FLT
- 71 7502
- 71 SYS BD
- 71 mem err log fail
- 71 Firmware could not clear memory error logs.
- 71 <TABLE ROW>
- 71 TST
- 71 7600
- 71 DIMM
- 71 dest mem test
- 71 Starting the destructive memory test.
- 71 <TABLE ROW>
- 71 WRN
- 71 7601
- 71 DIMM
- 71 mem init only
- 71 Skip the test, just initialize memory to save time.
- 71 <TABLE ROW>
- 71 TST
- 71 7602
- 71 DIMM
- 71 tst 1st mem page
- 71 Starting 3-pass test of first memory page.
- 71 <TABLE ROW>
- 71 TST
- 71 7603
- 71 DIMM
- 71 tst rest of mem
- 71 Starting 3-pass test of the rest of memory.
- 71 <TABLE ROW>
- 71 TST
- 71 7604
- 71 DIMM
- 71 start 1st pass
- 71 Starting 1st pass of memory test (write pseudorandom sequence).
- 71 <TABLE ROW>
- 71 TST
- 71 7605
- 71 DIMM
- 71 1st pass x%
- 71 First pass is x% complete.
- 71 <TABLE ROW>
- 71 TST
- 71 7606
- 71 DIMM
- 71 start 2nd pass
- 71 Starting 2nd pass of memory test (verify pseudorandom sequence, write inverse).
- 71 <TABLE ROW>
- 71 TST
- 71 7607
- 71 DIMM
- 71 2nd pass x%
- 71 Second pass is x% complete.
- 71 <TABLE ROW>
- 71 TST
- 71 7608
- 71 DIMM
- 71 start 3rd pass
- 71 Starting 3rd pass of memory test (verify inverse sequence).
- 71 <TABLE ROW>
- 71 TST
- 71 7609
- 71 DIMM
- 71 3rd pass x%
- 71 Third pass is x% complete.
- 71 <TABLE ROW>
- 71 TST
- 71 760A
- 71 DIMM
- 71 start mem init
- 71 Starting memory initialization. (Initialize to zero to set ECC.)
- 71 <TABLE ROW>
- 71 TST
- 71 760B
- 71 DIMM
- 71 mem init x%
- 71 Memory initialization is x% complete.
- 71 <TABLE ROW>
- 71 WRN
- 71 760C
- 71 DIMM
- 71 repeat dest test
- 71 Re-execute destructive test for hardware troubleshooting.
- 71 <TABLE ROW>
- 71 FLT
- 71 760D
- 71 DIMM
- 71 mem code cpy err
- 71 Firmware tried to copy code from ROM to memory, but the copy didn’t match the original.
- 71 <TABLE ROW>
- 71 FLT
- 71 7610
- 71 DIMM
- 71 ECC wrt/read err
- 71 Writing and reading back good data caused memory ECC error.
- 71 <TABLE ROW>
- 71 FLT
- 71 7611
- 71 DIMM
- 71 ECC single data
- 71 Memory ECC test failed to detect single-bit data error.
- 72 <TABLE ROW>
- 72 FLT
- 72 7612
- 72 DIMM
- 72 ECC single ECC
- 72 Memory ECC test failed to detect single-bit ECC error.
- 72 <TABLE ROW>
- 72 FLT
- 72 7613
- 72 DIMM
- 72 ECC multipl data
- 72 Memory ECC test failed to detect multiple-bit data error.
- 72 <TABLE ROW>
- 72 FLT
- 72 7614
- 72 DIMM
- 72 ECC multpl signl
- 72 Memory ECC test failed to signal multiple-bit error.
- 72 <TABLE ROW>
- 72 FLT
- 72 7800
- 72 SYS BD
- 72 mem err summary
- 72 Printing memory error summary word to RS-232.
- 72 <TABLE ROW>
- 72 FLT
- 72 7801
- 72 SYS BD
- 72 bus ctrl par err
- 72 System bus (Runway) control parity error detected.
- 72 <TABLE ROW>
- 72 FLT
- 72 7802
- 72 SYS BD
- 72 bus addr par err
- 72 System bus (Runway) address parity error detected.
- 72 <TABLE ROW>
- 72 FLT
- 72 7803
- 72 SYS BD
- 72 bus data par err
- 72 System bus (Runway) data parity error detected.
- 72 <TABLE ROW>
- 72 FLT
- 72 7804
- 72 SYS BD
- 72 mem out of range
- 72 Memory access outside configured memory space.
- 72 <TABLE ROW>
- 72 FLT
- 72 7805
- 72 SYS BD
- 72 bus broadcst err
- 72 System bus (Runway) broadcast error detected.
- 72 <TABLE ROW>
- 72 FLT
- 72 7806
- 72 SYS BD
- 72 mem addr par err
- 72 Memory bus address parity error detected.
- 72 <TABLE ROW>
- 72 FLT
- 72 7807
- 72 SYS BD
- 72 mem ctlr stat wd
- 72 Printing memory controller status word to RS-232.
- 72 <TABLE ROW>
- 72 FLT
- 72 781s
- 72 SYS BD
- 72 DIMM s uncor err
- 72 Uncorrectable ECC error detected in DIMM s.
- 72 <TABLE ROW>
- 72 FLT
- 72 782s
- 72 SYS BD
- 72 DIMM s corr err
- 72 Correctable ECC error detected in DIMM s.
- 72 <TABLE ROW>
- 72 FLT
- 72 7840
- 72 SYS BD
- 72 unexpected HPMC
- 72 Unexpected HPMC detected.
- 72 <TABLE ROW>
- 72 FLT
- 72 FLT
- 72 7841
- 72 7841
- 72 SYS BD
- 72 SYS BD
- 72 mem status invld
- 72 mem status invld
- 72 Memory error status word is invalid.
- 72 <TABLE ROW>
- 72 FLT
- 72 7842
- 72 SYS BD
- 72 mem summ invalid
- 72 Memory summary word is invalid.
- 72 <TABLE ROW>
- 72 FLT
- 72 7843
- 72 SYS BD
- 72 fwd prog invalid
- 72 Memory forward progress word is invalid.
- 72 <TABLE ROW>
- 72 FLT
- 72 7844
- 72 SYS BD
- 72 mem HPMC summ wd
- 72 Printing memory error summary word to RS-232.
- 72 <TABLE ROW>
- 72 FLT
- 72 7845
- 72 SYS BD
- 72 mem ctlr stat wd
- 72 Printing memory controller status word to RS-232.
- 72 <TABLE ROW>
- 72 FLT
- 72 7846
- 72 SYS BD
- 72 mem err overflow
- 72 Multiple memory errors detected.
- 73 <TABLE ROW>
- 73 FLT
- 73 7848
- 73 SYS BD
- 73 addr not mapped
- 73 Memory address outside configured memory space.
- 73 <TABLE ROW>
- 73 FLT
- 73 785s
- 73 DIMM
- 73 MBE in DIMM s
- 73 Destructive memory test detected an uncorrectable memory error in DIMM s.
- 73 <TABLE ROW>
- 73 FLT
- 73 786s
- 73 DIMM
- 73 SBE&MBE DIMM s
- 73 Destructive memory test detected both an uncorrectable and a correctable memory error in DIMM s.
- 73 <TABLE ROW>
- 73 FLT
- 73 787s
- 73 DIMM
- 73 mem err DIMM s
- 73 Destructive memory test detected a pattern compare error in DIMM s.
- 73 <TABLE ROW>
- 73 FLT
- 73 788s
- 73 DIMM
- 73 SBE in DIMM s
- 73 Destructive memory test detected a correctable memory error in DIMM s.
- 73 <TABLE ROW>
- 73 FLT
- 73 7890
- 73 DIMM
- 73 MBE overwrt SBE
- 73 Firmware replaced a correctable memory error entry in the PDT with an uncorrectable memory error ...
- 73 <TABLE ROW>
- 73 FLT
- 73 7891
- 73 DIMM
- 73 dup entry in PDT
- 73 The PDT already contains an entry at that address.
- 73 <TABLE ROW>
- 73 FLT
- 73 7892
- 73 SYS BD
- 73 PDT write error
- 73 Error adding the entry to the PDT.
- 73 <TABLE ROW>
- 73 FLT
- 73 7893
- 73 SYS BD
- 73 PDT is full
- 73 The PDT is full--cannot add new entry.
- 73 <TABLE ROW>
- 73 FLT
- 73 7900
- 73 SYS BD
- 73 no DMT entry
- 73 Internal error--cannot find DIMM entry.
- 73 <TABLE ROW>
- 73 FLT
- 73 7901
- 73 SYS BD
- 73 no rank entry
- 73 Internal error--cannot find rank entry.
- 73 <TABLE ROW>
- 73 FLT
- 73 7902
- 73 SYS BD
- 73 bad refrsh intvl
- 73 Computed refresh interval is invalid.
- 73 <TABLE ROW>
- 73 FLT
- 73 7903
- 73 SYS BD
- 73 mem intrlv fail
- 73 Cannot generate memory interleave.
- 73 <TABLE ROW>
- 73 FLT
- 73 7904
- 73 SYS BD
- 73 mem reloc failed
- 73 Cannot interleave with relocated range (3.75GB - 4.0GB).
- 73 <TABLE ROW>
- 73 FLT
- 73 7905
- 73 SYS BD
- 73 mem intrlv error
- 73 Undefined memory interleave failure.
- 73 <TABLE ROW>
- 73 FLT
- 73 79FF
- 73 SYS BD
- 73 mem firmware err
- 73 Internal error--never expected this to happen.
- 73 <TABLE ROW>
- 73 WRN
- 73 80F3
- 73 SYS BD
- 73 err rd IODC byte
- 73 Cannot read IODC from ROM or card.
- 73 <TABLE ROW>
- 73 WRN
- 73 80F4
- 73 EXT IO
- 73 boot read error
- 73 Cannot load IODC entry_init for boot device.
- 73 <TABLE ROW>
- 73 WRN
- 73 80F5
- 73 EXT IO
- 73 boot exec error
- 73 Error initializing boot device.
- 73 <TABLE ROW>
- 73 WRN
- 73 80F6
- 73 EXT IO
- 73 boot read error
- 73 Cannot load IODC entry_io for boot device.
- 73 <TABLE ROW>
- 73 WRN
- 73 80F7
- 73 EXT IO
- 73 boot IO error
- 73 Error detected during boot device I/O.
- 74 <TABLE ROW>
- 74 WRN
- 74 80F8
- 74 EXT IO
- 74 invalid boot dev
- 74 Invalid boot device class; bad IODC?
- 74 <TABLE ROW>
- 74 WRN
- 74 80FC
- 74 EXT IO
- 74 invalid boot dev
- 74 Unexpected error; bad IODC?
- 74 <TABLE ROW>
- 74 INI
- 74 8800
- 74 IOCARD
- 74 PCI BusWlk start
- 74 Starting PCI bus and device discovery.
- 74 <TABLE ROW>
- 74 INI
- 74 INI
- 74 88r1
- 74 88r1
- 74 IOCARD
- 74 IOCARD
- 74 PCI Rope r walk
- 74 PCI Rope
- 74 r
- 74 walk
- 74 Starting PCI bus and device discovery on Rope r.
- 74 <TABLE ROW>
- 74 INI
- 74 8802
- 74 IOCARD
- 74 PCI BusWalk done
- 74 PCI bus and device discovery complete.
- 74 <TABLE ROW>
- 74 INI
- 74 8803
- 74 SYS BD
- 74 PCI alloc done
- 74 Done allocating address space for PCI devices.
- 74 <TABLE ROW>
- 74 INI
- 74 INI
- 74 8804
- 74 8804
- 74 SYS BD
- 74 SYS BD
- 74 PCI config done
- 74 PCI config done
- 74 Done configuring PCI devices.
- 74 <TABLE ROW>
- 74 FLT
- 74 FLT
- 74 881r
- 74 881
- 74 r
- 74 IO BD
- 74 IO BD
- 74 R2PCIr not found
- 74 Rope-to-PCI bridge r not found.
- 74 <TABLE ROW>
- 74 FLT
- 74 FLT
- 74 883r
- 74 883r
- 74 IO BD
- 74 IO BD
- 74 Rope r config err
- 74 PCI configuration failed below Rope-to-PCI bridge r.
- 74 <TABLE ROW>
- 74 FLT
- 74 FLT
- 74 884r
- 74 884r
- 74 EXT IO
- 74 EXT IO
- 74 Rope r tgl fail
- 74 Rope r tgl fail
- 74 Rope r debug register toggle failed.
- 74 <TABLE ROW>
- 74 INI
- 74 INI
- 74 8850
- 74 8850
- 74 SYS_BD
- 74 SYS_BD
- 74 early rope0 init
- 74 early rope0 init
- 74 Initializing rope 0 for early RS-232 output.
- 74 <TABLE ROW>
- 74 FLT
- 74 FLT
- 74 8850
- 74 8850
- 74 SYS_BD
- 74 SYS_BD
- 74 rope0 init fail
- 74 rope0 init fail
- 74 Couldn’t initialize rope 0.
- 74 <TABLE ROW>
- 74 INI
- 74 INI
- 74 8860
- 74 8860
- 74 SYS_BD
- 74 SYS_BD
- 74 rope0 init done
- 74 rope0 init done
- 74 Rope 0 initialization complete.
- 74 <TABLE ROW>
- 74 INI
- 74 INI
- 74 8870
- 74 8870
- 74 IO_BD
- 74 IO_BD
- 74 early R2PCI init
- 74 early R2PCI init
- 74 Initializing rope-to-PCI bridge 0 for early RS-232 output.
- 74 <TABLE ROW>
- 74 FLT
- 74 FLT
- 74 8870
- 74 8870
- 74 IO_BD
- 74 IO_BD
- 74 R2PCI init fail
- 74 R2PCI init fail
- 74 Couldn’t initialize rope-to-PCI bridge 0.
- 74 <TABLE ROW>
- 74 INI
- 74 INI
- 74 8880
- 74 8880
- 74 IO_BD
- 74 IO_BD
- 74 R2PCI init done
- 74 R2PCI init done
- 74 Rope-to-PCI bridge 0 initialization.
- 74 <TABLE ROW>
- 74 INI
- 74 INI
- 74 8890
- 74 8890
- 74 IO_BD
- 74 IO_BD
- 74 early Super init
- 74 early Super init
- 74 Iniitalizing Super-I/O for early RS-232 output.
- 74 <TABLE ROW>
- 74 FLT
- 74 FLT
- 74 8890
- 74 8890
- 74 IO_BD
- 74 IO_BD
- 74 Super init fail
- 74 Super init fail
- 74 Couldn’t initialize Super-I/O.
- 74 <TABLE ROW>
- 74 INI
- 74 INI
- 74 88A0
- 74 88A0
- 74 IO_BD
- 74 IO_BD
- 74 Super init done
- 74 Super init done
- 74 Super-I/O initialization complete.
- 74 <TABLE ROW>
- 74 WRN
- 74 WRN
- 74 8A03
- 74 8A03
- 74 EXT IO
- 74 EXT IO
- 74 No graph console
- 74 No graph console
- 74 Cannot re-establish communications with the graphics console.
- 74 <TABLE ROW>
- 74 WRN
- 74 8A04
- 74 EXT IO
- 74 No USB keyboard
- 74 Cannot re-establish communications with the USB keyboard.
- 74 <TABLE ROW>
- 74 TST
- 74 8C06
- 74 EXT IO
- 74 PCI BIST test
- 74 Running PCI Built-In Self-Test
- 74 <TABLE ROW>
- 74 WRN
- 74 8C07
- 74 EXT IO
- 74 PCI BIST error
- 74 PCI Built-In Self-Test failed.
- 74 <TABLE ROW>
- 74 WRN
- 74 8C08
- 74 SYS BD
- 74 PCI alloc error
- 74 PCI address space allocation failed.
- 74 <TABLE ROW>
- 74 WRN
- 74 8C09
- 74 IO BD
- 74 PCI mem mngr err
- 74 Memory allocation for PCI device failed.
- 75 <TABLE ROW>
- 75 WRN
- 75 8C0A
- 75 EXT IO
- 75 PCI mem type err
- 75 PCI device requested invalid memory type.
- 75 <TABLE ROW>
- 75 WRN
- 75 8C0B
- 75 IO BD
- 75 PCI max bus dpth
- 75 PCI bus depth exceeded maximum supported depth.
- 75 <TABLE ROW>
- 75 WRN
- 75 8C0C
- 75 EXT IO
- 75 PCI dev not cnfg
- 75 Unable to configure PCI device.
- 75 <TABLE ROW>
- 75 WRN
- 75 8C0F
- 75 IO BD
- 75 dev tree ovrflow
- 75 Data space for PCI devices is full.
- 75 <TABLE ROW>
- 75 WRN
- 75 8DEC
- 75 IO BD
- 75 init LAN SROM
- 75 Initializing the core LAN serial EPROM.
- 75 <TABLE ROW>
- 75 SHU
- 75 8DEC
- 75 IO BD
- 75 resetting system
- 75 Restarting system after core LAN initialization.
- 75 <TABLE ROW>
- 75 FLT
- 75 8E10
- 75 IO BD
- 75 PARALEL port cfg
- 75 Parallel port configuration failed.
- 75 <TABLE ROW>
- 75 FLT
- 75 8E11
- 75 IO BD
- 75 SERIAL1 port cfg
- 75 Serial 1 port configuration failed.
- 75 <TABLE ROW>
- 75 FLT
- 75 8E12
- 75 IO BD
- 75 SERIAL2 port cfg
- 75 Serial 2 port configuration failed.
- 75 <TABLE ROW>
- 75 FLT
- 75 8E13
- 75 IO BD
- 75 FLOPPY drive cfg
- 75 Floppy drive configuration failed.
- 75 <TABLE ROW>
- 75 FLT
- 75 8E20
- 75 IO BD
- 75 bad USB port cfg
- 75 USB port configuration failed.
- 75 <TABLE ROW>
- 75 WRN
- 75 9001
- 75 EXT IO
- 75 no console found
- 75 Search for console display device failed.
- 75 <TABLE ROW>
- 75 INI
- 75 9151
- 75 IO BD
- 75 init SERIAL_1
- 75 Initializing serial 1 port as console display.
- 75 <TABLE ROW>
- 75 INI
- 75 9152
- 75 IO BD
- 75 init SERIAL_2
- 75 Initializing serial 2 port as console display.
- 75 <TABLE ROW>
- 75 INI
- 75 915F
- 75 IO BD
- 75 init unknown dev
- 75 Initializing unknown device as console display.
- 75 <TABLE ROW>
- 75 INI
- 75 916s
- 75 EXT IO
- 75 init PCI slot s
- 75 Initializing PCI device in slot s as console display.
- 75 <TABLE ROW>
- 75 INI
- 75 91DB
- 75 IO BD
- 75 init SERIAL_LDB
- 75 Initializing serial LDB port as console display.
- 75 <TABLE ROW>
- 75 INI
- 75 9C51
- 75 IO BD
- 75 consol is SER_1
- 75 Console display is on serial port 1.
- 75 <TABLE ROW>
- 75 WRN
- 75 9C51
- 75 IO BD
- 75 bad init SERIAL1
- 75 Serial port 1 failed to initialize as a console device.
- 75 <TABLE ROW>
- 75 INI
- 75 9C52
- 75 IO BD
- 75 consol is SER_2
- 75 Console display is on serial port 2.
- 75 <TABLE ROW>
- 75 WRN
- 75 9C52
- 75 IO BD
- 75 bad init SERIAL2
- 75 Serial port 2 failed to initialize as a console device.
- 75 <TABLE ROW>
- 75 INI
- 75 9C6s
- 75 EXT IO
- 75 consol is GRAPHs
- 75 Console display is on graphics card in PCI slot s.
- 76 <TABLE ROW>
- 76 WRN
- 76 9C6s
- 76 EXT IO
- 76 bad PCI slot s
- 76 Graphics in PCI slot s failed to initialize as a console device.
- 76 <TABLE ROW>
- 76 INI
- 76 9C8t
- 76 EXT IO
- 76 cnfg mon type t
- 76 Set graphics console to monitor type t. (Seen when cycling through types.)
- 76 <TABLE ROW>
- 76 WRN
- 76 9C8t
- 76 EXT IO
- 76 mon type t fail
- 76 Failed to configure console to monitor type t.
- 76 <TABLE ROW>
- 76 INI
- 76 9CDB
- 76 IO BD
- 76 consl is SER_LDB
- 76 Console display is on serial LDB port.
- 76 <TABLE ROW>
- 76 WRN
- 76 9CDB
- 76 IO BD
- 76 bad init SER_LDB
- 76 Serial LDB port failed to initialize as a console device.
- 76 <TABLE ROW>
- 76 FLT
- 76 A088
- 76 IO BD
- 76 consl path fault
- 76 Unable to boot--no console device found.
- 76 <TABLE ROW>
- 76 WRN
- 76 A008
- 76 EXT IO
- 76 no boot device
- 76 Unable to boot--no bootable device found.
- 76 <TABLE ROW>
- 76 WRN
- 76 A0BD
- 76 EXT IO
- 76 device not ready
- 76 Boot device not ready--operation may be retried.
- 76 <TABLE ROW>
- 76 FLT
- 76 A0FF
- 76 EXT IO
- 76 unknown launch
- 76 Unable to boot. Explanation may appear on console.
- 76 <TABLE ROW>
- 76 WRN
- 76 A50F
- 76 EXT IO
- 76 init pri pth err
- 76 Unable to boot from primary boot device.
- 76 <TABLE ROW>
- 76 WRN
- 76 A70F
- 76 EXT IO
- 76 init otr pth err
- 76 Unable to boot from non-primary boot device.
- 76 <TABLE ROW>
- 76 INI
- 76 C10m
- 76 SYS BD
- 76 CPUm is monarch
- 76 CPU m was chosen as the monarch processor. (All other CPUs are slaves.)
- 76 <TABLE ROW>
- 76 INI
- 76 C30m
- 76 SYS BD
- 76 monarchm test
- 76 CPU m finished the monarch-only tests and system initialization.
- 76 <TABLE ROW>
- 76 INI
- 76 C30C
- 76 SYS BD
- 76 mnrch slv chck
- 76 The monarch CPU is checking whether the slaves are in the correct rendezvous.
- 76 <TABLE ROW>
- 76 INI
- 76 C3FF
- 76 SYS/IO
- 76 late monarch tst
- 76 The monarch CPU is starting the late (post-memory) monarch-only tests.
- 76 <TABLE ROW>
- 76 FLT
- 76 C3FF
- 76 SYS/IO
- 76 late monarch flt
- 76 The late (post-memory) monarch-only tests failed.
- 76 <TABLE ROW>
- 76 INI
- 76 C4CC
- 76 SYS BD
- 76 initialize ccp
- 76 Searching for (lab-only) debugger card.
- 76 <TABLE ROW>
- 76 INI
- 76 C4CD
- 76 SYS BD
- 76 no ccp found
- 76 Debugger card not found.
- 76 <TABLE ROW>
- 76 INI
- 76 C4CE
- 76 SYS BD
- 76 ccp disabled
- 76 Debugger card disabled.
- 76 <TABLE ROW>
- 76 INI
- 76 C4CF
- 76 SYS BD
- 76 ccp found
- 76 Debugger card found.
- 76 <TABLE ROW>
- 76 INI
- 76 C500
- 76 SYS BD
- 76 get primary path
- 76 Autoboot is reading primary boot path from stable store.
- 77 <TABLE ROW>
- 77 INI
- 77 C540
- 77 EXT IO
- 77 init pri path
- 77 Autoboot is trying to boot from primary boot device.
- 77 <TABLE ROW>
- 77 INI
- 77 C580
- 77 EXT IO
- 77 load IPL pri pth
- 77 Loading IPL from primary boot device.
- 77 <TABLE ROW>
- 77 WRN
- 77 C5F0
- 77 EXT IO
- 77 err read pri IPL
- 77 Error loading IPL from primary boot device.
- 77 <TABLE ROW>
- 77 FLT
- 77 C5F0
- 77 EXT IO
- 77 pri IPL fault
- 77 Error loading IPL from primary boot device.
- 77 <TABLE ROW>
- 77 WRN
- 77 C5F1
- 77 EXT IO
- 77 err read pri IPL
- 77 Cannot load IPL from primary boot device--load address invalid.
- 77 <TABLE ROW>
- 77 WRN
- 77 C5F2
- 77 EXT IO
- 77 err read pri IPL
- 77 Cannot load IPL from primary boot device--file is not IPL image.
- 77 <TABLE ROW>
- 77 WRN
- 77 C5F3
- 77 EXT IO
- 77 err read pri IPL
- 77 Cannot load IPL from primary boot device--IPL image size invalid.
- 77 <TABLE ROW>
- 77 WRN
- 77 C5F4
- 77 EXT IO
- 77 err read pri IPL
- 77 Cannot load IPL from primary boot device--IPL entry point address invalid.
- 77 <TABLE ROW>
- 77 WRN
- 77 C5F8
- 77 EXT IO
- 77 err read pri IPL
- 77 Cannot load IPL from primary boot device--IPL image checksum failed.
- 77 <TABLE ROW>
- 77 INI
- 77 C5FF
- 77 <blank>
- 77 launch pri IPL
- 77 Booting from primary boot path.
- 77 <TABLE ROW>
- 77 INI
- 77 INI
- 77 C642
- 77 C642
- 77 EXT IO
- 77 EXT IO
- 77 init kybrd consl
- 77 init kybrd consl
- 77 Try to initialize USB keyboard.
- 77 <TABLE ROW>
- 77 FLT
- 77 FLT
- 77 C642
- 77 C642
- 77 EXT IO
- 77 EXT IO
- 77 kybd error
- 77 kybd error
- 77 An error was detected trying to access the keyboard.
- 77 <TABLE ROW>
- 77 WRN
- 77 WRN
- 77 C643
- 77 C643
- 77 EXT IO
- 77 EXT IO
- 77 keyboard reinit
- 77 keyboard reinit
- 77 Keyboard was re-initialized.
- 77 <TABLE ROW>
- 77 WRN
- 77 C64F
- 77 EXT IO
- 77 reset montr type
- 77 The console device failed to initialize with the given monitor type. Try again with type 1.
- 77 <TABLE ROW>
- 77 TST
- 77 C68s
- 77 SYS BD
- 77 test graph in s
- 77 Look for graphics card in PCI slot s.
- 77 <TABLE ROW>
- 77 INI
- 77 C68s
- 77 SYS BD
- 77 init graph in s
- 77 Successfully initialized graphics card in PCI slot s.
- 77 <TABLE ROW>
- 77 WRN
- 77 C68s
- 77 SYS BD
- 77 fail graph in s
- 77 Card in PCI slot s failed graphics initialization or is not a graphics card.
- 77 <TABLE ROW>
- 77 INI
- 77 C740
- 77 EXT IO
- 77 init other path
- 77 Autoboot is trying to boot from non-primary boot device.
- 77 <TABLE ROW>
- 77 INI
- 77 C780
- 77 EXT IO
- 77 ld IPL othr path
- 77 Loading IPL from non-primary boot device.
- 77 <TABLE ROW>
- 77 WRN
- 77 C7F0
- 77 EXT IO
- 77 other IPL fault
- 77 Error loading IPL from non-primary boot device.
- 78 <TABLE ROW>
- 78 WRN
- 78 C7F1
- 78 EXT IO
- 78 bad alt IPL read
- 78 Cannot load IPL from non-primary boot device--load address invalid.
- 78 <TABLE ROW>
- 78 WRN
- 78 C7F2
- 78 EXT IO
- 78 bad alt IPL read
- 78 Cannot load IPL from non-primary boot device--file is not IPL image.
- 78 <TABLE ROW>
- 78 WRN
- 78 C7F3
- 78 EXT IO
- 78 bad alt IPL read
- 78 Cannot load IPL from non-primary boot device--IPL image size invalid.
- 78 <TABLE ROW>
- 78 WRN
- 78 C7F4
- 78 EXT IO
- 78 bad alt IPL read
- 78 Cannot load IPL from non-primary boot device--IPL entry point address invalid.
- 78 <TABLE ROW>
- 78 WRN
- 78 C7F8
- 78 EXT IO
- 78 bad alt IPL read
- 78 Cannot load IPL from non-primary boot device--IPL image checksum failed.
- 78 <TABLE ROW>
- 78 WRN
- 78 C7FF
- 78 <blank>
- 78 launch IPL other
- 78 Booting from a device other than the primary boot path.
- 78 <TABLE ROW>
- 78 INI
- 78 CB00
- 78 SYS BD
- 78 TOC initiated
- 78 A Transfer of Control entered the firmware TOC handler.
- 78 <TABLE ROW>
- 78 WRN
- 78 CB01
- 78 SYS BD
- 78 no OS TOC vector
- 78 There is no TOC vector for the operating system. Firmware will soft boot the system.
- 78 <TABLE ROW>
- 78 WRN
- 78 CB02
- 78 SYS BD
- 78 bad OS TOC addr
- 78 The operating system TOC handler vector is invalid. Firmware will soft boot the system.
- 78 <TABLE ROW>
- 78 WRN
- 78 CB03
- 78 SYS BD
- 78 bad OS TOC code
- 78 The operating system TOC handler is invalid. Firmware will soft boot the system.
- 78 <TABLE ROW>
- 78 WRN
- 78 CB04
- 78 SYS BD
- 78 bad OS TOC len
- 78 The size of the operating system TOC handler is invalid. Firmware will soft boot the system.
- 78 <TABLE ROW>
- 78 WRN
- 78 CB05
- 78 SYS BD
- 78 bad OS TOC chksm
- 78 The operating system TOC handler failed the checksum test. Firmware will soft boot the system.
- 78 <TABLE ROW>
- 78 WRN
- 78 CB0A
- 78 SYS BD
- 78 prev TOC logged
- 78 Firmware detected unread PIM data from a previous TOC and will not overwrite it. (PIM for this TO...
- 78 <TABLE ROW>
- 78 INI
- 78 CB0B
- 78 SYS BD
- 78 branch to OS TOC
- 78 Branching to the operating system TOC handler.
- 78 <TABLE ROW>
- 78 WRN
- 78 CB0C
- 78 SYS BD
- 78 br OS TOC failed
- 78 Branch to the operating system TOC handler failed. Firmware will soft boot the system.
- 79 <TABLE ROW>
- 79 WRN
- 79 CB10
- 79 SYS BD
- 79 LPMC initiated
- 79 A Low-Priority Machine Check entered the firmware LPMC handler. The handler should log the error ...
- 79 <TABLE ROW>
- 79 WRN
- 79 CB11
- 79 SYS BD
- 79 icache LPMC err
- 79 An instruction cache parity error caused the LPMC.
- 79 <TABLE ROW>
- 79 WRN
- 79 CB12
- 79 SYS BD
- 79 dcache LPMC err
- 79 A data cache parity/ECC error caused the LPMC.
- 79 <TABLE ROW>
- 79 WRN
- 79 CB13
- 79 SYS BD
- 79 dcache tag error
- 79 The parity error is in the tag portion of the data cache.
- 79 <TABLE ROW>
- 79 WRN
- 79 CB14
- 79 SYS BD
- 79 dcache data err
- 79 The parity error is in the data portion of the data cache.
- 79 <TABLE ROW>
- 79 FLT
- 79 CB1F
- 79 SYS BD
- 79 OS LPMC failed
- 79 Firmware couldn’t branch to the operating system LPMC handler. It will halt the CPU, requiring a ...
- 79 <TABLE ROW>
- 79 WRN
- 79 CB71
- 79 SYS BD
- 79 HPMC occurred
- 79 A High-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler).
- 79 <TABLE ROW>
- 79 WRN
- 79 CB72
- 79 SYS BD
- 79 LPMC occurred
- 79 A Low-Priority Machine Check caused entry to PDCE_CHECK (the firmware trap handler).
- 79 <TABLE ROW>
- 79 WRN
- 79 CB73
- 79 SYS BD
- 79 TOC occurred
- 79 A Transfer of Control caused entry to PDCE_CHECK (the firmware trap handler).
- 79 <TABLE ROW>
- 79 FLT
- 79 CB9r
- 79 IO BD
- 79 Error on roper
- 79 An error was detected on rope r.
- 79 <TABLE ROW>
- 79 FLT
- 79 CB99
- 79 SYS BD
- 79 seed IVA handler
- 79 PDC_SEED_ERROR triggered an HPMC.
- 79 <TABLE ROW>
- 79 FLT
- 79 CB9A
- 79 SYS BD
- 79 HPMC overwrite
- 79 Firmware is overwriting PIM data from a previous HPMC.
- 79 <TABLE ROW>
- 79 OFF
- 79 CBA1
- 79 SYS BD
- 79 AIOC int dat err
- 79 I/O controller internal error.
- 79 <TABLE ROW>
- 79 OFF
- 79 CBA2
- 79 IO BD
- 79 EtoA rope perr
- 79 Parity error between I/O controller and Rope-to-PCI bridge.
- 79 <TABLE ROW>
- 79 OFF
- 79 CBA3
- 79 SYS BD
- 79 access invld TLB
- 79 An invalid I/O TLB entry was accessed.
- 79 <TABLE ROW>
- 79 OFF
- 79 CBA4
- 79 IO BD
- 79 EtoA rp cmd perr
- 79 Command parity error between I/O controller and Rope-to-PCI bridge.
- 79 <TABLE ROW>
- 79 OFF
- 79 CBA5
- 79 IO BD
- 79 CDF timeout
- 79 Rope Command/Data FIFO is backed up.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBA6
- 80 IO BD
- 80 R2PCI resp tmout
- 80 Rope-to-PCI bridge timed out. Could be a failure of the PCI card, rope, or R2PCI bridge.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBA7
- 80 IO BD
- 80 Unknown AIOC err
- 80 Unknown I/O controller error.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBB1
- 80 IO BD
- 80 PCI timeout
- 80 A PCI card requested the bus but failed to use it.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBB2
- 80 IO BD
- 80 PCI timeout; OV
- 80 More than once aPCI card requested the bus but failed to use it.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBB3
- 80 IO BD
- 80 R2PCI intrnl err
- 80 Rope-to-PCI bridge internal error.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBB4
- 80 IO BD
- 80 R2PCI int err;OV
- 80 Multiple Rope-to-PCI bridge internal errors.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBB6
- 80 IO BD
- 80 PCI data req err
- 80 PCI bus data requestor error: R2PCI detected PERR# assertion.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBB8
- 80 IO BD
- 80 PCI D req err;OV
- 80 Rope-to-PCI bridge detected multiple PERR# assertions.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBBA
- 80 IO BD
- 80 PCI data par err
- 80 PCI bus data parity error.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBBC
- 80 IO BD
- 80 PCI Dpar err;OV
- 80 Multiple PCI bus data parity errors.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBBE
- 80 IO BD
- 80 R2PCI intrnl err
- 80 Error in R2PCI internal data to PCI bus.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBC0
- 80 IO BD
- 80 R2PCI int err;OV
- 80 Multiple R2PCI internal data to PCI bus errors.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBC2
- 80 IO BD
- 80 PCI data parity
- 80 PCI data parity error. I/O error log word 3 contains the error address.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBC4
- 80 IO BD
- 80 PCI data par; OV
- 80 Multiple PCI data parity errors. I/O error log word 3 contains the error address.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBC6
- 80 IO BD
- 80 R2PCI intrnl err
- 80 Rope-to-PCI bridge internal data error: R2PCI detected PERR# assertion.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBC8
- 80 IO BD
- 80 R2PCI int err;OV
- 80 Multiple R2PCI internal data errors: R2PCI detected multiple PERR# assertions.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBCA
- 80 IO BD
- 80 PCI data rs err
- 80 PCI bus data responder error: R2PCI detected PERR# assertion.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBCC
- 80 IO BD
- 80 PCI D rs err; OV
- 80 Multiple PCI bus data responder errors: R2PCI detected multiple PERR# assertions.
- 80 <TABLE ROW>
- 80 OFF
- 80 CBCE
- 80 IO BD
- 80 R2PCI T-Abort
- 80 Rope-to-PCI bridge signalled Target Abort.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBD0
- 81 IO BD
- 81 R2PCI T-Abort;OV
- 81 Rope-to-PCI bridge signalled multiple Target Aborts.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBD2
- 81 IO BD
- 81 PCI parity err
- 81 PCI address/command parity error.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBD4
- 81 IO BD
- 81 PCI par err; OV
- 81 Multiple PCI address/command parity errors.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBD6
- 81 IO BD
- 81 PCI no DEVSEL#
- 81 No PCI device selected (DEVSEL# assertion). I/O error log word 3 contains the error address.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBD8
- 81 IO BD
- 81 PCI no DEVSEL;OV
- 81 Multiple DEVSEL# assertions. I/O error log word 3 contains the error address.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBDA
- 81 IO BD
- 81 PCI target abort
- 81 A PCI device signalled Target Abort. I/O error log word 3 contains the error address.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBDC
- 81 IO BD
- 81 PCI T-Abort; OV
- 81 A PCI device signalled multiple Target Aborts. I/O error log word 3 contains the error address.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBDD
- 81 IO BD
- 81 PCI assrts LOCK#
- 81 A PCI device asserted LOCK#.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBDE
- 81 IO BD
- 81 PCI LOCK#; OV
- 81 A PCI device asserted LOCK# multiple times.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBE0
- 81 IO BD
- 81 PCI assrts SERR#
- 81 A PCI device asserted SERR#: address parity error or other system error.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBE2
- 81 IO BD
- 81 PCI SERR#; OV
- 81 A PCI device asserted SERR# multiple times.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBE3
- 81 IO BD
- 81 Unknown PCI err
- 81 Unknown PCI error detected.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBE6
- 81 SYS BD
- 81 AtoE rope perr
- 81 Parity error between system I/O controller and Rope-to-PCI bridge.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBE7
- 81 IO BD
- 81 R2PCI intrnl err
- 81 Rope-to-PCI bridge internal data error.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBE8
- 81 SYS BD
- 81 AtoE rope perr
- 81 Command parity error between system I/O controller and Rope-to-PCI bridge.
- 81 <TABLE ROW>
- 81 OFF
- 81 CBE9
- 81 IO BD
- 81 Unknown Rope err
- 81 Unknown rope error occurred.
- 81 <TABLE ROW>
- 81 FLT
- 81 CBF0
- 81 SYS BD
- 81 HPMC initiated
- 81 A High-Priority Machine Check entered the firmware HPMC handler.
- 81 <TABLE ROW>
- 81 FLT
- 81 CBF1
- 81 SYS BD
- 81 no OS HPMC IVA
- 81 There is no HPMC vector for the operating system. Firmware will halt the CPU, requiring a power c...
- 82 <TABLE ROW>
- 82 FLT
- 82 CBF2
- 82 SYS BD
- 82 bad OS HPMC len
- 82 The size of the operating system HPMC handler is invalid. Firmware will halt the CPU, requiring a...
- 82 <TABLE ROW>
- 82 FLT
- 82 CBF3
- 82 SYS BD
- 82 bad OS HPMC addr
- 82 The operating system HPMC handler vector is invalid. Firmware will halt the CPU, requiring a powe...
- 82 <TABLE ROW>
- 82 FLT
- 82 CBF4
- 82 SYS BD
- 82 bad OS HPMC cksm
- 82 The operating system HPMC handler failed the checksum test. Firmware will halt the CPU, requiring...
- 82 <TABLE ROW>
- 82 FLT
- 82 CBF5
- 82 SYS BD
- 82 OS HPMC vector 0
- 82 The size of the operating system HPMC handler is zero. Firmware will halt the CPU, requiring a po...
- 82 <TABLE ROW>
- 82 WRN
- 82 CBFA
- 82 SYS BD
- 82 prev HPMC logged
- 82 Firmware detected unread PIM data from a previous HPMC and will overwrite it.
- 82 <TABLE ROW>
- 82 FLT
- 82 CBFB
- 82 SYS BD
- 82 brnch to OS HPMC
- 82 Branching to the operating system HPMC handler.
- 82 <TABLE ROW>
- 82 FLT
- 82 CBFC
- 82 SYS BD
- 82 OS HPMC br err
- 82 Branch to the operating system HPMC handler failed. Firmware will halt the CPU, requiring a power...
- 82 <TABLE ROW>
- 82 FLT
- 82 CBFD
- 82 SYS BD
- 82 unknown check
- 82 The firmware trap handler didn’t detect an HPMC, LPMC, or TOC.
- 82 <TABLE ROW>
- 82 FLT
- 82 CBFE
- 82 SYS BD
- 82 HPMC during TOC
- 82 A High-Priority Machine Check occurred during Transfer of Control processing.
- 82 <TABLE ROW>
- 82 FLT
- 82 CBFF
- 82 SYS BD
- 82 multiple HPMCs
- 82 A High-Priority Machine Check occurred while processing another HPMC.
- 82 <TABLE ROW>
- 82 INI
- 82 CC0n
- 82 SYS BD
- 82 CPUn OS rendezvs
- 82 Slave CPU n entering the final rendezvous, waiting for the operating system to awaken it.
- 82 <TABLE ROW>
- 82 INI
- 82 CC1n
- 82 SYS BD
- 82 CPUn early rend
- 82 Slave CPU n entering the early rendezvous, waiting for the monarch CPU to initialize scratch RAM ...
- 82 <TABLE ROW>
- 82 INI
- 82 CC2n
- 82 SYS BD
- 82 CPUn rendezvous
- 82 Slave CPU n entering rendezvous. Slave CPUs enter this rendezvous numerous times during boot.
- 82 <TABLE ROW>
- 82 INI
- 82 CC3n
- 82 SYS BD
- 82 CPUn cache rend
- 82 Slave CPU n entering cached rendezvous, waiting for the monarch CPU to configure the system bus.
- 83 <TABLE ROW>
- 83 INI
- 83 CC4n
- 83 SYS BD
- 83 CPUn mem rendez
- 83 Slave CPU n entering memory rendezvous, waiting for the monarch CPU to select a boot device.
- 83 <TABLE ROW>
- 83 TST
- 83 D000
- 83 SYS BD
- 83 micro controller
- 83 Firmware is initializing communications with the system controller.
- 83 <TABLE ROW>
- 83 WRN
- 83 D004
- 83 SYS BD
- 83 micro not resp
- 83 Firmware detected a communications error with the system controller.
- 83 <TABLE ROW>
- 83 INI
- 83 D005
- 83 SYS BD
- 83 set dom1 fan spd
- 83 Firmware is initializing communications with the system controller.
- 83 <TABLE ROW>
- 83 INI
- 83 D006
- 83 SYS BD
- 83 set dom2 fan spd
- 83 Firmware is initializing communications with the system controller.
- 83 <TABLE ROW>
- 83 WRN
- 83 D007
- 83 SYS BD
- 83 bad microctl cmd
- 83 Firmware detected a communications error with the system controller.
- 83 <TABLE ROW>
- 83 FLT
- 83 D01n
- 83 SYS/IO
- 83 fan n: failure!
- 83 Firmware detected system fan n stopped.
- 83 <TABLE ROW>
- 83 WRN
- 83 D02n
- 83 SYS/IO
- 83 fan n: too slow!
- 83 Firmware detected system fan n is running too slowly.
- 83 memory failures
- 83 memory failures
- 83 # /usr/sbin/sysdiag
- 83 # /usr/sbin/sysdiag
- 83 Enter
- 83 DUI > logtool
- 83 DUI > logtool
- 83 Enter
- 83 LOGTOOL> memrpt detail
- 83 LOGTOOL> memrpt detail
- 83 Enter
- 84 troubleshooting:system verification tests
- 84 troubleshooting:system verification tests
- 84 troubleshooting:system verification tests
- 84 • a command line interface (accessed through the
- 84 • a command line interface (accessed through the
- 84 • a menu-driven interface (accessed through the
- 84 • a graphical user interface (accessed through the
- 84 man cstm
- 84 Enter
- 84 man xstm
- 84 1. In a terminal window, type the following at the # prompt to invoke the command line interface:
- 84 1. In a terminal window, type the following at the # prompt to invoke the command line interface:
- 84 # cstm
- 84 2. The following message appears:
- 84 Support Tools Manager
- 84 CSTM>
- 84 3. To verify the system operation, type the following at the
- 84 CSTM>
- 84 Verification has started on device (CPU).
- 84 Verification has started on device (FPU).
- 84 CSTM> Verification of(FPU)has completed.
- 84 CSTM> Verification of(CPU) has completed.
- 84 4. Press
- 85 5. To exit the Support Tools Manager, enter the following:
- 85 CSTM>
- 86 troubleshooting:ODE
- 86 troubleshooting:ODE
- 86 troubleshooting:ODE
- 86 • wdiag
- 86 • wdiag
- 86 • wdiag
- 86 • memtest
- 86 • memtest
- 86 • mapper
- 86 • mapper
- 86 • astrodiag
- 86 • astrodiag
- 86 • siodiag
- 86 • siodiag
- 87 4 field replaceable units
- 88 WARNING For all removal and replacement procedures in this chapter, you must power off the workst...
- 88 NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and that all screws are ...
- 88 • Torx T-10 driver
- 88 • Torx T-10 driver
- 88 • Torx T-15 driver
- 88 • Light duty flat blade screw driver with 6-inch (150mm) blade
- 88 • Needle-nose pliers
- 88 • ESD equipment (see
- 88 • Pen knife
- 88 NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and that all gasket mate...
- 88 Figure 41.
- 89 c-class:main components
- 89 c-class:main components
- 89 c-class:main components
- 90 Figure42. CD Drive Bracket Assembly
- 90 Figure42. CD Drive Bracket Assembly
- 90 Figure 42.
- 91 Figure43. Floppy Drive Bracket Assembly
- 91 Figure43. Floppy Drive Bracket Assembly
- 91 Figure 43.
- 92 Figure44. Hard Disk Drive Bracket Assembly
- 92 Figure44. Hard Disk Drive Bracket Assembly
- 93 FRU:exchange and non-exchange
- 93 FRU:exchange and non-exchange
- 93 FRU:exchange and non-exchange
- 94 FRUs part numbers
- 94 FRUs part numbers
- 94 <TABLE>
- 94 Table41. Exchange Parts FRU List
- 94 <TABLE HEADING>
- 94 <TABLE ROW>
- 94 Part Number
- 94 Description
- 94 <TABLE BODY>
- 94 <TABLE ROW>
- 94 A3862-69501
- 94 256 MByte SDRAM DIMM
- 94 <TABLE ROW>
- 94 A3860-69501
- 94 128 MByte SDRAM DIMM
- 94 <TABLE ROW>
- 94 A1658-69028
- 94 9GB 7200 RPM LVD Disk
- 94 <TABLE ROW>
- 94 A1658-69026
- 94 18GB 10K RPM Disk
- 94 <TABLE ROW>
- 94 A1658-69027
- 94 9GB 10K RPM Disk
- 94 <TABLE ROW>
- 94 A4986-69001
- 94 500W Power Supply
- 95 <TABLE>
- 95 Table42. Non-exchange Parts FRU List
- 95 <TABLE HEADING>
- 95 <TABLE ROW>
- 95 Part Number
- 95 Description
- 95 <TABLE BODY>
- 95 <TABLE ROW>
- 95 A4986-66530
- 95 SCA Disk Backplane
- 95 <TABLE ROW>
- 95 D2035-60282
- 95 Floppy Drive
- 95 <TABLE ROW>
- 95 D4385-60001
- 95 32x ATAPI CD Drive
- 95 <TABLE ROW>
- 95 A4978-62005
- 95 SCA - drive bracket
- 95 <TABLE ROW>
- 95 A4978-62006
- 95 CD Drive bracket assembly
- 95 <TABLE ROW>
- 95 A4986-62006
- 95 Floppy Disk Drive bracket assembly
- 95 <TABLE ROW>
- 95 5063-4513
- 95 Speaker
- 95 <TABLE ROW>
- 95 A4978-62025
- 95 LCD/ Power Switch
- 95 <TABLE ROW>
- 95 A4978-62012
- 95 Fan- 92 mm
- 95 <TABLE ROW>
- 95 A4978-62013
- 95 Fan - 120 mm
- 95 <TABLE ROW>
- 95 A4978-68501
- 95 Fan - 80 mm - low profile
- 95 <TABLE ROW>
- 95 A4983-60401
- 95 USB Keyboard, United States
- 95 <TABLE ROW>
- 95 A4983-60101
- 95 USB Mouse, United States
- 95 <TABLE ROW>
- 95 A4986-63008
- 95 LVD SCSI Terminator
- 95 <TABLE ROW>
- 95 A1658-63012
- 95 NSE SCSI Terminator
- 95 <TABLE ROW>
- 95 A4986-40007
- 95 PCI Retainer Clip
- 95 <TABLE ROW>
- 95 A4986-62003
- 95 Front Bezel w/ CD Filler (blank)
- 95 <TABLE ROW>
- 95 A4986-63002
- 95 Cable - CD Signal
- 95 <TABLE ROW>
- 95 5182-1857
- 95 CD Audio Cable
- 95 <TABLE ROW>
- 95 A4986-63003
- 95 Cable - Ultra SCSI Signal
- 95 <TABLE ROW>
- 95 A4986-63004
- 95 Cable - Floppy Signal
- 95 <TABLE ROW>
- 95 A4986-63005
- 95 Floppy/CD ROM Power Cable
- 95 <TABLE ROW>
- 95 A4986-63006
- 95 LCD Signal Cable
- 95 <TABLE ROW>
- 95 A4978-62005
- 95 SCA Drive Bracket Assembly
- 95 <TABLE ROW>
- 95 A4986-62001
- 95 Main Chassis w/ keys, fans
- 95 <TABLE ROW>
- 95 A4986-00026
- 95 PCI Air Separator (Divider)
- 95 <TABLE ROW>
- 95 A4986-00039
- 95 Fan Bracket- Disk/Memory
- 95 <TABLE ROW>
- 95 0624-0727
- 95 Screw - 6-32 X 0.437T-15 w/ slot
- 95 <TABLE ROW>
- 95 A4978-00039
- 95 6-32 Thumbscrew
- 96 <TABLE ROW>
- 96 0624-0727
- 96 Screw -T-15 w/ slot
- 96 <TABLE ROW>
- 96 1826-4269
- 96 Real Time Clock Module (internal battery)
- 97 FRU:removal and replacement
- 97 FRU:removal and replacement
- 97 FRU:removal and replacement
- 97 Step 1. Power off the system, the monitor, and any peripheral devices.
- 97 Step 1. Power off the system, the monitor, and any peripheral devices.
- 97 NOTE There is no need to manually shutdown the HP-UX operating system on the workstation before s...
- 97 CAUTION Unplugging the power cord while HP-UX is running can damage the system files. Do
- 97 Step 2. Unplug the workstation power cord and the power cord of any peripheral devices from AC wa...
- 97 Step 3. Unplug the system unit power cord from the AC input connector.
- 97 Step 4. Disconnect any external cables from the connectors on the front and rear of the system unit.
- 97 Step 5. Attach a static-grounding wrist strap to your wrist and a location on the system chassis ...
- 97 Step 6. Lay the workstation on a flat stable surface, such as a table top or floor. To protect ag...
- 97 CAUTION Follow normal ESD, anti-static precautions when handling the workstation or any of its co...
- 97 Step 7. If installed, remove any locking device from the security loop on the rear of the system ...
- 98 system unit front panel
- 98 system unit front panel
- 98 opening the system unit front panel
- 98 opening the system unit front panel
- 98 1. Power off the workstation, and unplug the power cord from the electrical outlet.
- 98 1. Power off the workstation, and unplug the power cord from the electrical outlet.
- 98 2. Attach the static-grounding wrist strap by following the instructions on the package. Attach t...
- 98 3. Unlock the front panel (also known as the front bezel) by pressing in on the two latch buttons...
- 98 Figure45. Opening the Front Bezel
- 98 Figure45. Opening the Front Bezel
- 98 4. Swing the panel clockwise on its left snap hinges until the panel comes free and place the fro...
- 98 Closing the System Unit Front Panel
- 98 Closing the System Unit Front Panel
- 98 1. Locate the snap hinges on the left side of the front panel, and insert them into the holes loc...
- 98 1. Locate the snap hinges on the left side of the front panel, and insert them into the holes loc...
- 98 2. Rotate the front panel counterclockwise until you hear the two latch buttons snap in place. Th...
- 99 3. Plug in the system unit power cord, and power on the system.
- 99 left side panel of the system unit
- 99 left side panel of the system unit
- 99 opening the left side panel of the system unit
- 99 opening the left side panel of the system unit
- 99 safety interlock switch:warning
- 99 safety interlock switch:warning
- 99 1. Turn the computer around so the rear is facing you. On the right edge of the computer, there a...
- 99 1. Turn the computer around so the rear is facing you. On the right edge of the computer, there a...
- 99 2. Grasp the back edge of the left side panel and rotate it outward approximately 45 degrees to t...
- 100 left side panel
- 100 left side panel
- 100 left side panel
- 100 safety interlock switch:location
- 100 NOTE The EMI gasket, as shown in Figure 4-6, must not be removed from the side panel.
- 101 closing the left side panel of the system unit
- 101 closing the left side panel of the system unit
- 101 NOTE Power supply thumbscrews must be fully tightened before closing the left side panel. Failure...
- 101 1. Hold the left side panel so that the hook hinges can be inserted into their hinge slots. See F...
- 101 1. Hold the left side panel so that the hook hinges can be inserted into their hinge slots. See F...
- 101 2. Swing the back edge of the panel toward the system unit’s back edge and press the outside edge...
- 101 3. Secure the side panel in place by screwing the top and bottom slotted T-15 Torx thumb screws i...
- 102 FRU:power supply
- 102 FRU:power supply
- 102 FRU:power supply
- 102 WARNING To prevent injury, unplug the workstation power cord from the electrical outlet before se...
- 102 • Propping up the Power Supply
- 102 • Propping up the Power Supply
- 102 • Removing the Power Supply
- 102 propping up the power supply
- 102 propping up the power supply
- 102 1. Lay the system on its side on a cushioned surface to protect against damage to the exterior wo...
- 102 1. Lay the system on its side on a cushioned surface to protect against damage to the exterior wo...
- 102 2. Open the left side panel of the system unit by following the procedure in the section “opening...
- 102 3. Unscrew the two screws on the power supply chassis as shown in
- 102 Figure47. Unscrewing the Power Supply Captive Screws
- 102 Figure47. Unscrewing the Power Supply Captive Screws
- 102 4. Lift up on the power supply handle. The power supply bail automatically engages once the power...
- 103 Figure48. Propping Up the Power Supply
- 103 Figure48. Propping Up the Power Supply
- 103 closing the system
- 103 closing the system
- 103 1. Push slightly back on the power supply until you are able to remove the bail from the bail loc...
- 103 1. Push slightly back on the power supply until you are able to remove the bail from the bail loc...
- 103 2. Tighten both captive screws in place as seen in
- 103 3. Replace the left side panel of the system unit as shown in the section “closing the left side ...
- 103 removing the power supply
- 103 removing the power supply
- 103 1. Follow the steps covered in the section “propping up the power supply.”
- 103 1. Follow the steps covered in the section “propping up the power supply.”
- 103 2. Disconnect both power cables from the system board, the control cable, and the power cable for...
- 104 Figure49. Disconnecting the Power Supply Cables
- 104 Figure49. Disconnecting the Power Supply Cables
- 104 3. Remove the bail from the bail lock. See Figure 4-10.
- 104 4. Grasp the power supply by the handle and slide the spring hinge lever to the right and rotate ...
- 105 Figure410. Removing the Power Supply
- 105 Figure410. Removing the Power Supply
- 105 closing the system
- 105 closing the system
- 106 FRU:I/O cards
- 106 FRU:I/O cards
- 106 FRU:I/O cards
- 106 Figure411. PCI Card Slot Numbering and Capabilities
- 106 Figure411. PCI Card Slot Numbering and Capabilities
- 106 NOTE To maintain good graphics performance, you should always use slot 2 (SL2) as the primary gra...
- 106 I/O slot:numbering
- 106 I/O slot:numbering
- 106 I/O slot:numbering
- 107 removing i/o cards
- 107 removing i/o cards
- 107 1. Open the side panel of the system unit as explained in the section “opening the left side pane...
- 107 1. Open the side panel of the system unit as explained in the section “opening the left side pane...
- 107 2. Pull evenly in the direction of the arrow on both sides of the I/O card retainer to remove it....
- 107 Figure413. Removing the I/O Card Retainer
- 107 Figure413. Removing the I/O Card Retainer
- 107 3. Locate the I/O card you want to remove and using a T-15 Torx driver or flat blade screw driver...
- 107 Figure414. Removing the I/O Card
- 107 Figure414. Removing the I/O Card
- 107 4. Pull evenly on the outside edges of the I/O card to remove it.
- 108 installing i/o cards
- 108 installing i/o cards
- 108 NOTE Slots two and four are the graphics card slots. The primary graphics card slot is slot numbe...
- 108 1. Open the left side panel of the system unit as explained in the section “opening the left side...
- 108 1. Open the left side panel of the system unit as explained in the section “opening the left side...
- 108 2. Locate the appropriate slot for the I/O card that is to be installed. See Figure 4-12.
- 108 3. Unscrew the T-15 Torx screw from the bulkhead blank of the slot you have chosen. If no blank i...
- 108 4. Pull evenly in the direction of the arrow on both sides of the I/O card retainer to remove it....
- 108 5. Insert the I/O card into the slot you have chosen with the bulkhead appropriately positioned. ...
- 108 6. Replace the I/O card retainer by placing the bottom retainer clip in the slot on the air divid...
- 108 7. Close the left side panel of the system unit by following the procedure in the section “closin...
- 109 FRU:fans
- 109 FRU:fans
- 109 FRU:fans
- 109 • Removing the fan from the hard disk drive area
- 109 • Removing the fan from the hard disk drive area
- 109 • Removing the fans from the CPU area
- 109 • Removing the fan and speaker from the I/O card area.
- 109 Figure415. Fan Cooling Areas for the System Unit
- 109 Figure415. Fan Cooling Areas for the System Unit
- 110 FRU:hard disk drive fan
- 110 FRU:hard disk drive fan
- 110 FRU:hard disk drive fan
- 110 • SCA disk interface board
- 110 • SCA disk interface board
- 110 • System board
- 110 • DIMM cards
- 110 1. Remove the system unit’s side panel. See the section “opening the left side panel of the syste...
- 110 1. Remove the system unit’s side panel. See the section “opening the left side panel of the syste...
- 110 2. Lay the system unit on its right side (determined by facing the workstation front panel), and ...
- 110 3. Unplug the fan power cable from the system board. If you are removing the hard disk drive fan ...
- 110 4. Lift up on the handle of the fan bracket to remove the fan. See Figure 4-16. As you lift up on...
- 111 Figure416. Removing the Fan from the Hard Disk Drive Chassis
- 111 Figure416. Removing the Fan from the Hard Disk Drive Chassis
- 111 FRU:system fans
- 111 FRU:system fans
- 111 FRU:system fans
- 111 1. Remove the system units left side panel. See the section “opening the left side panel of the s...
- 111 1. Remove the system units left side panel. See the section “opening the left side panel of the s...
- 111 2. Lay the system unit on its right side (determined by facing the system units front panel), and...
- 111 3. Unplug the power cables for the fans as shown in
- 112 Figure417. Removing the Fan Rivets
- 112 Figure417. Removing the Fan Rivets
- 112 4. Remove the plastic mounting rivets that hold the fans in place. See Figure 4-17. To remove the...
- 113 Figure418. Removing CPU Area Fans
- 113 Figure418. Removing CPU Area Fans
- 113 installing the fans for the CPU area
- 113 installing the fans for the CPU area
- 113 installing the bottom fan
- 113 installing the bottom fan
- 113 1. Position the bottom fan so its power cable channel is against the system unit chassis, and the...
- 113 1. Position the bottom fan so its power cable channel is against the system unit chassis, and the...
- 113 2. Slide the lower left corner of the fan into the fan support. See
- 113 3. Line up the rivet holes of the fan with the rivet holes of the system unit chassis.
- 113 4. Press the plastic rivets into place. See
- 113 5. Plug the fan power cable into its connector on the system board. See
- 113 installing the top fan
- 113 installing the top fan
- 113 1. Position the top fan so its power cable channel is up against the workstation chassis, and the...
- 113 1. Position the top fan so its power cable channel is up against the workstation chassis, and the...
- 113 2. Line up the rivet holes of the fan with the rivet holes of the system unit chassis.
- 113 3. Press the plastic rivets into place. See
- 113 4. Plug the fan power cable into its connector on the system board. See
- 114 FRU:I/O fan
- 114 FRU:I/O fan
- 114 FRU:I/O fan
- 114 1. Remove the workstation left side panel. See the section “opening the left side panel of the sy...
- 114 1. Remove the workstation left side panel. See the section “opening the left side panel of the sy...
- 114 2. Lay the workstation on its side, and remove all of the I/O cards. See the section “removing i/...
- 114 3. Remove the system unit air divider as shown in Figure 4-19 by unscrewing the two T-15 Torx scr...
- 114 Figure419. Removing the System Unit Air Divider
- 114 Figure419. Removing the System Unit Air Divider
- 114 4. Remove the fan and speaker cables from the system board and lift up on the bracket mounting cl...
- 115 Figure420. Removing the Fan and Speaker from the I/O Area
- 115 Figure420. Removing the Fan and Speaker from the I/O Area
- 115 5. To remove the speaker from the mounting bracket, push a finger through the access hole and spr...
- 116 6. Remove the fan from the bracket by slightly pulling the left and right fan mounting clips away...
- 116 installing a fan or speaker in the i/o card area
- 116 installing a fan or speaker in the i/o card area
- 116 1. Remove the fan or speaker from the I/O card area by following the procedure in the section “re...
- 116 1. Remove the fan or speaker from the I/O card area by following the procedure in the section “re...
- 116 2. Install the fan by positioning the fan power cable channel so that it is located in the lower ...
- 116 3. Install the speaker by positioning it so that the speaker cable can be easily run out of the h...
- 116 4. Replace the fan/speaker bracket in the chassis by inserting the bottom and in first between th...
- 116 5. Position the fan power cable, speaker cable and LCD ribbon cable so that they run along the sy...
- 116 6. Place the air divider into its proper position as shown in
- 116 7. Replace all I/O cards into their proper slots as explained in the section “I/O Cards” in this ...
- 116 8. Close the system unit as discussed in the section “closing the system unit” in this chapter.
- 117 FRU:removable media
- 117 FRU:removable media
- 117 FRU:removable media
- 117 • CD Drive
- 117 • CD Drive
- 117 • 3.5-inch floppy disk drive.
- 117 FRU:CD drive
- 117 FRU:CD drive
- 117 FRU:CD drive
- 117 WARNING Turn the workstation off and unplug the power cord before installing the CD drive.
- 117 CAUTION CD drives are susceptible to mechanical and electronic shock. When handling the drive, al...
- 117 1. Perform the procedures in the sections “opening the system unit front panel” and “opening the ...
- 117 1. Perform the procedures in the sections “opening the system unit front panel” and “opening the ...
- 117 2. Remove the CD Drive rear cover by unscrewing the T-15 Torx screw as shown in Figure 4-22. Note...
- 118 Figure422. Removing the CD Drive Rear Cover
- 118 Figure422. Removing the CD Drive Rear Cover
- 118 3. Rotate the system unit around until you see the front of the unit as shown in
- 118 Figure423. Front of System Unit with the Front Panel Removed
- 118 Figure423. Front of System Unit with the Front Panel Removed
- 118 4. Remove both CD Drive bracket screws (T-15 Torx screws) and pull the CD Drive bracket out of th...
- 119 Figure424. Removing the CD Drive Bracket and Blank
- 119 Figure424. Removing the CD Drive Bracket and Blank
- 119 5. Read the CAUTION statement at the beginning of this section. Next remove the CD Drive from its...
- 120 Figure425. Installing the CD Drive
- 120 Figure425. Installing the CD Drive
- 120 6. Slide the CD Drive and its bracket into the system unit chassis as shown in Figure 4-25. There...
- 120 7. Tighten the two CD Drive bracket screws as shown in Figure 4-26.
- 120 Figure426. Tightening the Bracket Screws
- 120 Figure426. Tightening the Bracket Screws
- 120 8. Plug the ATAPI and power cables into their appropriate connectors. Note that the connectors ar...
- 121 Figure427. Plugging in the ATAPI and Power Cables
- 121 Figure427. Plugging in the ATAPI and Power Cables
- 121 9. Make sure that the ATAPI and power cables are positioned so that they come out of the bottom e...
- 121 Figure428. Replacing the Rear EMI CD Drive Cover
- 121 Figure428. Replacing the Rear EMI CD Drive Cover
- 121 10. Complete the installation of the CD Drive by replacing the front and side panels of the syste...
- 121 removing a CD drive
- 121 removing a CD drive
- 121 CAUTION CD Drives are susceptible to mechanical and electronic shock. When handling the drive, al...
- 122 1. Perform the procedures in the sections “opening the system unit front panel” and “opening the ...
- 122 1. Perform the procedures in the sections “opening the system unit front panel” and “opening the ...
- 122 2. Remove the CD Drive rear disk cover by unscrewing the T-15 Torx screw as shown in
- 122 Figure429. Removing the CD Drive’s Rear Cover
- 122 Figure429. Removing the CD Drive’s Rear Cover
- 122 3. Rotate the system unit around until you see the front of the unit as shown in Figure 4-30.
- 122 Figure430. Front of the System Unit with the Front Panel Removed
- 122 Figure430. Front of the System Unit with the Front Panel Removed
- 122 4. Remove both CD Drive bracket screws (T-15 Torx screws) and pull the CD Drive out of the chassi...
- 123 Figure431. Removing the CD Drive
- 123 Figure431. Removing the CD Drive
- 123 5. Insert the CD Drive blank in the CD Drive bracket and tighten the four CD Drive mounting screw...
- 124 Figure432. Installing the CD Drive Blank
- 124 Figure432. Installing the CD Drive Blank
- 124 6. Tighten the two CD Drive bracket screws as shown in Figure 4-33.
- 124 Figure433. Tightening the Bracket Screws
- 124 Figure433. Tightening the Bracket Screws
- 124 7. Place the ATAPI cable and power cables inside the CD Drive chassis, and position the cables so...
- 125 Figure434. Replacing the CD Drive Rear Cover
- 125 Figure434. Replacing the CD Drive Rear Cover
- 125 FRU:floppy disk drive
- 125 FRU:floppy disk drive
- 125 FRU:floppy disk drive
- 125 WARNING Turn the workstation off and unplug the power cord before installing the floppy disk drive.
- 125 CAUTION Floppy disk drives are susceptible to mechanical and electronic shock. When handling the ...
- 125 1. Perform the procedures in the sections “opening the system unit front panel” and “opening the ...
- 125 1. Perform the procedures in the sections “opening the system unit front panel” and “opening the ...
- 125 2. Remove the floppy rear-disk cover by unscrewing the T-15 Torx screw as shown in
- 126 Figure435. Removing the Floppy Disk’s Rear Cover
- 126 Figure435. Removing the Floppy Disk’s Rear Cover
- 126 3. Rotate the system unit around until you see the front of the workstation as shown in
- 126 Figure436. Front of Workstation with the Front Panel Removed
- 126 Figure436. Front of Workstation with the Front Panel Removed
- 126 4. Remove both floppy disk bracket screws (T-15 Torx screws) and pull the floppy disk bracket out...
- 127 Figure437. Removing the Floppy Disk Bracket and Blank
- 127 Figure437. Removing the Floppy Disk Bracket and Blank
- 127 5. Read the CAUTION statement at the beginning of this section. Next remove the floppy disk drive...
- 128 Figure438. Installing the Floppy Disk Drive
- 128 Figure438. Installing the Floppy Disk Drive
- 128 6. Slide the floppy disk and its bracket into the system unit chassis as shown in
- 128 7. Tighten the two floppy bracket screws as shown in
- 128 Figure439. Tightening the Bracket Screws
- 128 Figure439. Tightening the Bracket Screws
- 128 8. Plug the data and power cables into their appropriate connectors. Note that the connectors are...
- 129 Figure440. Plugging in the Data and Power Cables
- 129 Figure440. Plugging in the Data and Power Cables
- 129 9. Verify that the data and power cables are positioned to come out of the top edge of the rear f...
- 129 Figure441. Replacing the Rear Floppy Cover
- 129 Figure441. Replacing the Rear Floppy Cover
- 129 10. Complete the installation of the floppy disk drive by replacing the front and side panels of ...
- 129 removing a floppy disk drive
- 129 removing a floppy disk drive
- 129 1. Perform the procedures in the sections “opening the system unit front panel” and “opening the ...
- 129 1. Perform the procedures in the sections “opening the system unit front panel” and “opening the ...
- 130 2. Remove the floppy rear disk cover by unscrewing the T-15 Torx screw as shown in
- 130 Figure442. Removing the Floppy Disk’s Rear Cover
- 130 Figure442. Removing the Floppy Disk’s Rear Cover
- 130 3. Rotate the workstation around until you can see the front of the unit as shown in
- 130 Figure443. Front of Workstation with the Front Panel Removed
- 130 Figure443. Front of Workstation with the Front Panel Removed
- 130 4. Remove both floppy disk bracket screws (T-15 torx screws) and pull the floppy disk drive out o...
- 131 Figure444. Removing the Floppy Disk Drive
- 131 Figure444. Removing the Floppy Disk Drive
- 131 5. Place the floppy disk blank in the floppy disk bracket and insert the four floppy disk mountin...
- 132 Figure445. Installing the Floppy Disk Blank and Bracket
- 132 Figure445. Installing the Floppy Disk Blank and Bracket
- 132 6. Slide the floppy disk blank and its bracket into the system unit chassis as shown in
- 132 7. Tighten the two floppy disk bracket screws as shown in
- 132 Figure446. Tightening the Bracket Screws
- 132 Figure446. Tightening the Bracket Screws
- 133 8. Inspect and verify that the data and power cables are positioned to come out of the top edge o...
- 133 Figure447. Replacing the Rear Floppy Cover
- 133 Figure447. Replacing the Rear Floppy Cover
- 133 9. Complete the installation of the floppy disk drive by replacing the front and side panels of t...
- 134 FRU:hard disk drive
- 134 FRU:hard disk drive
- 134 FRU:hard disk drive
- 134 NOTE Do not use SCSI ID 7 for any of the internal or external disk drives. The host SCSI controll...
- 134 hard disk drive:
- 134 hard disk drive:
- 134 hard disk drive:
- 134 NOTE If you are installing a new hard disk drive, the slotted pan screws for attaching the drive ...
- 134 1. Open the front panel of the workstation, refer to the section “opening the system unit front p...
- 134 1. Open the front panel of the workstation, refer to the section “opening the system unit front p...
- 135 Figure448. The Hard Drive Slots
- 135 Figure448. The Hard Drive Slots
- 135 2. Open the hard drive slot by pressing the plastic release hook upward and pulling outward on th...
- 136 Figure449. Removing the Hard Drive Bracket
- 136 Figure449. Removing the Hard Drive Bracket
- 136 3. Mount the hard disk drive on the hard drive bracket using the four T-10 torx screws and rubber...
- 136 NOTE If you are installing a hard disk drive, you will need to mount it and create a file system ...
- 137 Figure450. Inserting the Hard Disk Drive
- 137 Figure450. Inserting the Hard Disk Drive
- 137 removing a hard disk drive
- 137 removing a hard disk drive
- 137 1. Open the front panel of the system using the instructions found in the section “opening the sy...
- 137 1. Open the front panel of the system using the instructions found in the section “opening the sy...
- 138 Figure451. The Hard Drive Slots
- 138 Figure451. The Hard Drive Slots
- 138 2. Open the hard drive slot by pressing the plastic release hook upward and pulling outward on th...
- 138 Figure452. Removing the Hard Disk Drive
- 138 Figure452. Removing the Hard Disk Drive
- 139 3. Remove the four T-15 Torx screws from the hard disk drive bracket. See
- 139 Figure453. Removing the Hard Disk Drive from the Bracket
- 139 Figure453. Removing the Hard Disk Drive from the Bracket
- 139 4. Slide the assembly into its hard drive slot, and push inward on the release lever until the fr...
- 140 Figure454. Replacing the Hard Disk Drive Bracket
- 140 Figure454. Replacing the Hard Disk Drive Bracket
- 141 FRU:DIMM cards
- 141 FRU:DIMM cards
- 141 FRU:DIMM cards
- 141 • Use the procedure described in
- 141 • Use the procedure described in
- 141 • Review the steps involved in installing memory DIMMs before you begin.
- 141 • Insert DIMMs in the order shown. Please refer to
- 141 • Note the proper orientation for DIMMs when inserting them into their connectors because the con...
- 141 • Use the “boot console handler” to verify that the computer recognizes the additional DIMMs when...
- 141 installing additional memory
- 141 installing additional memory
- 141 1. Open the side panel of the system unit as explained in the section “opening the left side pane...
- 141 1. Open the side panel of the system unit as explained in the section “opening the left side pane...
- 141 2. Lay the system on its side as shown in
- 141 Figure455. Propping Up the Power Supply
- 141 Figure455. Propping Up the Power Supply
- 141 3. Prop up the system unit power supply as explained in the section “propping up the system unit ...
- 142 4. For ease in installation of additional memory the hard disk drive fan may need to be removed. ...
- 142 5. Load the DIMM cards in the slots using the loading sequence provided in
- 142 DIMM:card slot numbering
- 142 DIMM:card slot numbering
- 142 DIMM:card slot numbering
- 142 NOTE When installing DIMMs, you need to orient the notches on the bottom edge of the DIMM card so...
- 142 6. Press downward on the ejector tabs located on both sides of the DIMM connector. See
- 143 Figure457. Installing Memory Cards
- 143 Figure457. Installing Memory Cards
- 143 7. Place the DIMM card in the connector, lining it up with the guides. Make sure to put the notch...
- 143 8. Close the ejector tab.
- 143 9. Press firmly and evenly on the DIMM card to ensure that it seats properly. The ejector tabs en...
- 143 10. Replace the power supply and workstation left side panel. You may now plug the power cord bac...
- 143 11. Verify that this installation was successful by following the steps in Chapter 6, “the boot c...
- 143 FRU:memory, removing
- 143 FRU:memory, removing
- 143 FRU:memory, removing
- 143 1. Open the side panel of the system unit as explained in the section “opening the left side pane...
- 143 1. Open the side panel of the system unit as explained in the section “opening the left side pane...
- 143 2. Lay the system on its side as shown in
- 144 Figure458. Propping Up the Power Supply
- 144 Figure458. Propping Up the Power Supply
- 144 3. Prop up the system unit power supply as explained in the section “propping up the system unit ...
- 144 4. For ease in removing memory cards, remove the fan from the hard disk drive chassis. See the se...
- 144 5. Press downward on the ejector tabs located on both sides of the DIMM connector. See
- 144 Figure459. Removing Memory Cards
- 144 Figure459. Removing Memory Cards
- 144 6. Lift up evenly on the outside edges of the DIMM card. See
- 144 7. Replace the power supply and system unit side panel. You may now plug the power cord back into...
- 144 8. Verify that the removal was successful by following the steps in Chapter 6, “boot console hand...
- 145 FRU:LCD
- 145 FRU:LCD
- 145 FRU:LCD
- 145 removing the system unit LCD
- 145 removing the system unit LCD
- 145 1. Open the system unit’s front panel as shown in the section “opening the system unit front panel.”
- 145 1. Open the system unit’s front panel as shown in the section “opening the system unit front panel.”
- 145 2. Unplug the LCD’s connector as shown in Figure 4-60.
- 145 Figure460. Removing the System Unit LCD
- 145 Figure460. Removing the System Unit LCD
- 145 3. Press inward on the mount clip located on the right side of the LCD mount and pull the right s...
- 145 replacing the
- 145 replacing the
- 145 1. Open the system unit’s front panel as shown in the section “opening the system unit front panel.”
- 145 1. Open the system unit’s front panel as shown in the section “opening the system unit front panel.”
- 145 2. Insert the LCD’s left-side mounting clips into the slots shown on the system unit chassis. See
- 145 3. Plug in the LCD connector as shown in Figure 4-60.
- 146 4. Replace the system unit’s front panel. This completes the installation of the system LCD assem...
- 147 FRU:system board
- 147 FRU:system board
- 147 FRU:system board
- 147 Removing the
- 147 Removing the
- 147 1. Remove the left side panel as explained in the section “opening the left side panel of the sys...
- 147 1. Remove the left side panel as explained in the section “opening the left side panel of the sys...
- 147 NOTE Remove the terminators on the rear panel of the workstation.
- 147 2. Remove the two T-15 Torx screws that secure the system board tray assembly to the rear panel o...
- 147 3. Remove the system unit power supply as covered in the section “system unit power supply” in th...
- 147 4. Remove the hard disk drive fan as described in the section “removing the fan from the hard dis...
- 147 5. Remove the DIMM cards as explained in the section “removing memory” in this chapter.
- 147 6. Remove the PCI retainer, the I/O cards from their PCI slots and the air divider as covered ear...
- 147 7. Unplug the following cables from the system board:
- 147 a. Floppy disk drive data cable
- 147 a. Floppy disk drive data cable
- 147 b. CD drive data cable
- 147 c. Hard disk drive fan cable
- 147 d. Fan/Speaker cables
- 147 e. LCD ribbon cable
- 147 f. CD drive audio cable
- 147 g. System board fan cables (2)
- 147 h. Ultra2 Wide LVD SCSI cable
- 148 Figure461. Removing the System Board
- 148 Figure461. Removing the System Board
- 148 8. Fold back the workstation cables to avoid interference or damage.
- 148 9. Grasp the system board tray handle and slide the system board to the front of the workstation....
- 148 FRU:system board, installation
- 148 FRU:system board, installation
- 148 FRU:system board, installation
- 148 1. Angle the system board assembly diagonally as you begin installation. Position the system boar...
- 148 1. Angle the system board assembly diagonally as you begin installation. Position the system boar...
- 149 Figure462. Installing the System Board
- 149 Figure462. Installing the System Board
- 149 2. Re-attach the cables described in step 7 of
- 149 3. Replace the following components:
- 149 a. Power supply
- 149 a. Power supply
- 149 b. DIMM cards
- 149 c. Hard disk drive fan
- 149 d. PCI air divider
- 149 e. PCI cards
- 149 f. PCI retainer
- 149 4. Replace the left side panel as explained in the section “opening the left side panel of the sy...
- 150 FRU:battery
- 150 FRU:battery
- 150 FRU:battery
- 150 1. Close all open applications on the workstation then use the power button on the front panel to...
- 150 1. Close all open applications on the workstation then use the power button on the front panel to...
- 150 2. Unplug the power cord from the workstation to disconnect all AC power. Remove the workstation ...
- 150 3. Remove the two captive screws for the power supply shown in
- 150 4. Carefully remove the defective real time clock module. Note the polarity dot which is silk-scr...
- 150 CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equ...
- 150 CAUTION Il y a danger d´explosion s´il y a remplacement incorrect de la batterie. Remplacer uniqu...
- 150 5. Insert the
- 150 6. Reconnect the 6-pin power supply cable to the system board. Push back slightly on the power su...
- 150 7. Replace the left side panel of the system unit as shown in the section “closing the left side ...
- 150 8. The HP workstation c-class is now ready to reboot with the operational battery.
- 151 5 diagrams
- 152 Diagrams:system power
- 152 Diagrams:system power
- 152 Diagrams:system power
- 152 Figure51. Power Distribution Diagram
- 152 Figure51. Power Distribution Diagram
- 153 system unit block diagram
- 153 system unit block diagram
- 153 Diagrams:functional block
- 153 Diagrams:functional block
- 153 Diagrams:functional block
- 155 6 boot console handler
- 156 • boot console handler features
- 156 • boot console handler features
- 156 • accessing the boot console handler
- 156 • booting the workstation
- 156 • searching for bootable media
- 156 • resetting the workstation
- 156 • displaying and setting paths
- 156 • displaying and setting the monitor type
- 156 • changing the console to an external terminal
- 156 • displaying the current memory configuration
- 156 • display the status of the system i/o
- 156 • setting the auto boot and auto search
- 156 • displaying and setting the security mode
- 156 • displaying and setting the fastboot
- 156 • displaying the LAN station address
- 156 • displaying system information
- 156 • displaying pim information
- 157 Boot Console Handler:features
- 157 Boot Console Handler:features
- 157 Boot Console Handler:features
- 157 • Boot your computer
- 157 • Boot your computer
- 157 • Search for bootable media
- 157 • Reset your computer
- 157 • Display and set boot paths
- 157 • Display and set your monitor type
- 157 • Display memory configuration information
- 157 • Display the status of the PCI slots
- 157 • Set Auto Boot, Auto Search, and Auto Start
- 157 • Set Fastboot
- 157 • Display LAN information
- 157 • Display system information
- 157 Boot Console Handler:help
- 158 Boot Console Handler:accessing
- 158 Boot Console Handler:accessing
- 158 Boot Console Handler:accessing
- 158 1. Close any files and applications on your computer.
- 158 1. Close any files and applications on your computer.
- 158 2. Press the power switch on the front panel of the workstation.
- 158 NOTE There is no need to manually shut down the HP-UX operating system on your computer before po...
- 158 3. Power on the workstation after it has completely shut down. If
- 158 NOTE If you are using a power-saving monitor, you will have less than 10 seconds from the time th...
- 158 4. Press a key. You will then see the message:
- 159 Boot Console Handler:menus
- 159 Boot Console Handler:menus
- 159 Boot Console Handler:menus
- 160 Boot Console Handler:main menu
- 164 Boot Console Handler:booting the workstation
- 164 Boot Console Handler:booting the workstation
- 164 Boot Console Handler:booting the workstation
- 164 • If you know which device you want to boot from, and you know that it contains a bootable operat...
- 164 • If you know which device you want to boot from, and you know that it contains a bootable operat...
- 164 • If you do not know which device you want to boot from, then type the following at the prompt a...
- 164 Path Number Device Path Device Type
- 164 P0IDETEAC CD-532E-B
- 164 P1FWSCSI.6.0SEAGATE ST39102LC
- 164 • If you wish to interact with the Initial System Loader (ISL) before booting the workstation, fo...
- 165 • If you do not know which media in your file systems have bootable operating systems, you can fi...
- 166 Boot Console Handler:bootable media search
- 166 Boot Console Handler:bootable media search
- 166 Boot Console Handler:bootable media search
- 166 Main Menu: Enter command > search ipl
- 166 • To hold the display temporarily, press
- 166 • To hold the display temporarily, press
- 166 • To continue the display, press
- 166 • To halt the search, press any other key
- 166 Main Menu: Enter command> search ipl device_type
- 166 •
- 166 •
- 166 •
- 166 •
- 166 •
- 166 •
- 166 •
- 166 •
- 166 •
- 166 •
- 166 Main Menu: Enter command> help search
- 167 Boot Console Handler:default values
- 167 Boot Console Handler:default values
- 167 Boot Console Handler:default values
- 168 Boot Console Handler:displaying and setting paths
- 168 Boot Console Handler:displaying and setting paths
- 168 Boot Console Handler:displaying and setting paths
- 168 <TABLE>
- 168 Table61. System Paths
- 168 <TABLE HEADING>
- 168 <TABLE ROW>
- 168 Path Type
- 168 Device
- 168 <TABLE BODY>
- 168 <TABLE ROW>
- 168 primary or pri
- 168 primary
- 168 Your workstation’s default boot device (usually the root disk)
- 168 <TABLE ROW>
- 168 alternate or alt
- 168 alternate
- 168 Your workstation’s alternate boot device (usually a DDS-format tape device)
- 168 <TABLE ROW>
- 168 console or con
- 168 console
- 168 Your workstation’s primary display device
- 168 <TABLE ROW>
- 168 keyboard or key
- 168 keyboard
- 168 Your workstation’s primary ASCII input device
- 168 <TABLE>
- 168 Table62. Mnemonic Style Notation
- 168 <TABLE HEADING>
- 168 <TABLE ROW>
- 168 I/O
- 168 Specification Format
- 168 <TABLE BODY>
- 168 <TABLE ROW>
- 168 Built-in LVD SCSI
- 168 fwscsi.scsi_address.logical_unit_number
- 168 fwscsi.scsi_address.logical_unit_number
- 168 <TABLE ROW>
- 168 Built-in NSE SCSI
- 168 scsi.scsi_address.logical_unit_number
- 168 scsi.scsi_address.logical_unit_number
- 168 <TABLE ROW>
- 168 Optional SCSI
- 168 pcin.scsi_address.logical_unit_number
- 168 pcin.scsi_address.logical_unit_number
- 168 <TABLE ROW>
- 168 Built-in LAN
- 168 lan.server_address.init_timeout.io_timeout
- 168 lan.server_address.init_timeout.io_timeout
- 168 <TABLE ROW>
- 168 Built-in IDE
- 168 IDE
- 168 IDE
- 170 Boot Console Handler:monitor type
- 170 Boot Console Handler:monitor type
- 170 Boot Console Handler:monitor type
- 170 the
- 170 the
- 170 NOTE The monitor command lets you change your workstation’s graphics configuration before you rep...
- 170 NOTE No space/blank characters may be used in the
- 171 displaying the current
- 171 displaying the current
- 171 MONITOR INFORMATION
- 171 ------- ----- ---------- ---------- ----- ---- -------
- 171 GRAPHICS(2)
- 171 Configuration Menu: Enter command>
- 172 setting the
- 172 setting the
- 172 MONITOR INFORMATION PathSlotHeadTypeSizeFreqClass ------------------...
- 172 MONITOR INFORMATION
- 172 ----- ----- ----------- ----------- ------ --- -------
- 172 GRAPHICS(2)
- 172 Configuration Menu: Enter command>
- 173 Value of monitor type n out of range (n - nn)
- 173 setting the monitor type at power on
- 173 setting the monitor type at power on
- 173 NOTE It takes approximately one to two minutes after powering on the workstation before the
- 173 MONITOR INFORMATION
- 173 ------ ------ --------- ------- ----- -------
- 173 GRAPHICS(2)
- 173 Press[RETURN]to select this monitor type(type n of n types)
- 174 Boot Console Handler:monitor problems
- 174 Boot Console Handler:monitor problems
- 174 Boot Console Handler:monitor problems
- 174 1. Turn the workstation power off.
- 174 1. Turn the workstation power off.
- 174 2. Disconnect the USB keyboard connector from the rear panel.
- 174 3. Connect a serial terminal emulator to the Serial 1 connector (the left serial connector) on th...
- 174 4. Power on the system. The system will now display the console to the terminal connected to Seri...
- 174 5. Set the monitor type and path using the Boot Console Handler. For information, reference the s...
- 175 Boot Console Handler:memory configuration
- 175 Boot Console Handler:memory configuration
- 175 Boot Console Handler:memory configuration
- 176 Memory:information sample
- 176 Memory:information sample
- 176 Memory:information sample
- 176 MEMORY INFORMATION MEMORY STATUS TABLE SlotSizeStatus ------------- ---...
- 176 0256MBActive
- 176 MEMORY FAULT TABLE
- 176 Slot Size Status
- 176 Active, Installed Memory: 640MB of SDRAM
- 176 Deallocated Pages : 0 Pages
- 176 Available Memory : 640 MB
- 176 Good Memory Required by OS : 0 (not initialized)
- 176 Memory
- 176 HVERSION SVERSION
- 176 -------- ---------
- 177 Boot Console Handler:I/O slot status
- 177 Boot Console Handler:I/O slot status
- 177 Boot Console Handler:I/O slot status
- 177 I/O MODULE INFORMATION PathDecimalType LocationHVERSVERVersDep --...
- 178 Boot Console Handler:auto boot and auto search
- 178 Boot Console Handler:auto boot and auto search
- 178 Boot Console Handler:auto boot and auto search
- 178 Auto search
- 179 Boot Console Handler:security mode
- 179 Boot Console Handler:security mode
- 179 Boot Console Handler:security mode
- 180 Boot Console Handler:fastboot mode
- 180 Boot Console Handler:fastboot mode
- 180 Boot Console Handler:fastboot mode
- 181 Boot Console Handler:LAN station address
- 181 Boot Console Handler:LAN station address
- 181 Boot Console Handler:LAN station address
- 182 Boot Console Handler:system information
- 182 Boot Console Handler:system information
- 182 Boot Console Handler:system information
- 183 Boot Console Handler:PIM
- 183 Boot Console Handler:PIM
- 183 Boot Console Handler:PIM
- 184 stable storage
- 184 stable storage
- 184 • Device path information
- 184 • Device path information
- 184 • The state of the boot flags
- 184 • HPMC error information
- 184 • Operating system initialization data
- 185 Boot Console Handler:ISL
- 185 Boot Console Handler:ISL
- 185 Boot Console Handler:ISL
- 185 • Execute user-entered commands to modify boot device paths and boot options in stable storage.
- 185 • Execute user-entered commands to modify boot device paths and boot options in stable storage.
- 185 • Run offline diagnostic programs and utilities
- 185 • Provide automatic booting of the HP-UX operating system after power-on or reset
- 185 invoking ISL from the boot console handler
- 185 invoking ISL from the boot console handler
- 185 Step 1. Follow the directions in
- 185 Step 1. Follow the directions in
- 185 Step 2. Answering yes (
- 185 ISL user commands
- 185 ISL user commands
- 185 • help
- 185 • help
- 185 • help
- 186 • display
- 186 • display
- 186 • primpath
- 186 • primpath
- 186 • altpath
- 186 • altpath
- 186 • conspath
- 186 • conspath
- 186 • listautofl
- 186 • listautofl
- 186 • support
- 186 • support
- 186 • readss
- 186 • readss
- 187 Boot Console Handler:firmware
- 187 Boot Console Handler:firmware
- 187 Boot Console Handler:firmware
- 187 Step 1. Verify the checksum of the file ".FRM" using the "
- 187 Step 1. Verify the checksum of the file ".FRM" using the "
- 187 Step 2. Use the "dd" command to copy the file "
- 187 Step 1. Re-boot your system and do the following:
- 187 Step 1. Re-boot your system and do the following:
- 187 to install the firmware update
- 187 to install the firmware update
- 187 Step 1. Install the tape you have just created into your tape drive.
- 187 Step 1. Install the tape you have just created into your tape drive.
- 187 Step 2. Shutdown your system via the power switch and power back on, or execute the reboot comman...
- 187 Step 3. When the display reads "Searching for a system to boot" press [escape]. At the BOOT ADMIN...
- 187 Step 4. Boot from the appropriate boot path. (You must boot from the device that contains the fir...
- 188 NOTE This process is automatic and requires no interaction until directed to do so. Please do not...
- 188 Step 5. A warning message will be issued, followed by "
- 188 NOTE FROM THIS POINT FORWARD, THIS PROCESS CANNOT BE INTERRUPTED UNTIL COMPLETION. INTERRUPTING T...
- 188 Firmware:update example
- 188 Firmware:update example
- 188 Firmware:update example
- 191 Product specifications:
- 191 Product specifications:
- 192 c-class:regulatory statements
- 192 c-class:regulatory statements
- 192 c-class:regulatory statements
- 194 c-class:emissions regulations
- 194 c-class:emissions regulations
- 194 c-class:emissions regulations
- 194 • This device may not cause harmful interference.
- 194 • This device may not cause harmful interference.
- 194 • This device must accept interference received, including interference that may cause undesired ...
- 194 • Cables used with this device must be properly shielded to comply with the requirements of the FCC.
- 194 c-class:video statement
- 194 c-class:video statement
- 194 c-class:video statement
- 195 FigureA1. VCCI Class B ITE (Japan)
- 195 FigureA1. VCCI Class B ITE (Japan)
- 195 FigureA2. RRL Class A EMI (Korea)
- 195 FigureA2. RRL Class A EMI (Korea)
- 195 FigureA3. EMI Class A (Taiwan)
- 195 FigureA3. EMI Class A (Taiwan)
- 195 c-class:emissions regulations
- 195 c-class:emissions regulations
- 195 c-class:emissions regulations
- 196 c-class:acoustics
- 196 c-class:acoustics
- 196 c-class:acoustics
- 196 c-class:laser statements
- 196 c-class:laser statements
- 196 c-class:laser statements
- 196 c-class:LEDs
- 196 c-class:LEDs
- 196 c-class:LEDs
- 196 Electrostatic Discharge:ESD precautions
- 196 Electrostatic Discharge:ESD precautions
- 196 Electrostatic Discharge:ESD precautions
- 196 • Stand on a static-free mat.
- 196 • Stand on a static-free mat.
- 196 • Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your...
- 196 • Connect all equipment together, including the static-free mat, static strap, routing nodes, and...
- 196 • Keep uninstalled printed circuit boards in their protective antistatic bags.
- 196 • Handle printed circuit boards by their edges, once you have removed them from their protective ...
- 197 c-class:warnings
- 197 c-class:warnings
- 197 c-class:warnings
- 198 c-class:environmental specifications
- 198 c-class:environmental specifications
- 198 c-class:environmental specifications
- 198 acoustics
- 198 acoustics
- 198 altitude
- 198 altitude
- 198 DC magnetic field interference
- 198 DC magnetic field interference
- 198 electromagnetic compatibility (EMC)
- 198 electromagnetic compatibility (EMC)
- 198 temperature
- 198 temperature
- 198 humidity (non-condensing)
- 198 humidity (non-condensing)
- 198 leakage current
- 198 leakage current
- 198 shock
- 198 shock
- 199 vibration
- 199 vibration
- 200 c-class:electrical specifications
- 200 c-class:electrical specifications
- 200 c-class:electrical specifications
- 200 c-class:electrical specifications
- 200 input power
- 200 input power
- 200 <TABLE>
- 200 <TABLE BODY>
- 200 <TABLE ROW>
- 200 7.4 Amps RMS max @ 100V
- 200 <TABLE ROW>
- 200 6.2 Amps RMS max @ 120V
- 200 <TABLE ROW>
- 200 3.8 Amps RMS max @ 200V
- 200 <TABLE ROW>
- 200 3.2 Amps RMS max @ 230V
- 200 line power
- 200 line power
- 200 line power
- 200 <TABLE>
- 200 <TABLE BODY>
- 200 <TABLE ROW>
- 200 AC Frequency: 48-66 Hz
- 200 <TABLE ROW>
- 200 AC Voltage: 90-264V
- 200 <TABLE ROW>
- 200 Maximum Power Input: 805 Watts
- 200 <TABLE ROW>
- 200 Maximum Current Load: 10 Amps
- 201 B SCSI connections
- 202 • SCSI bus differences
- 202 • SCSI bus differences
- 202 • SCSI restrictions
- 202 • Determining SCSI bus length
- 202 • Assigning SCSI device IDs
- 202 • Connecting to the SCSI ports
- 202 NOTE When attaching external SCSI devices, be sure to terminate the last device on the external S...
- 203 SCSI:bus differences
- 203 SCSI:bus differences
- 203 SCSI:bus differences
- 203 SCSI:mixing NSE and LVD devices on the same bus
- 203 SCSI:mixing NSE and LVD devices on the same bus
- 203 <TABLE>
- 203 TableB1. SCSI Bus Differences
- 203 <TABLE HEADING>
- 203 <TABLE ROW>
- 203 Type
- 203 Transfer Rate
- 203 Data Bus Width
- 203 Available SCSI Addresses1
- 203 Maximum Cable Length
- 203 Device Physical Location2
- 203 <TABLE BODY>
- 203 <TABLE ROW>
- 203 Ultra Narrow Single-Ended
- 203 Up to 20 Mbytes/sec
- 203 8 bits
- 203 0 through 6
- 203 3.0 meters (9.84 feet)
- 203 External
- 203 <TABLE ROW>
- 203 Ultra2 Wide Low-Voltage Differential
- 203 Up to 80 Mbytes/sec
- 203 16 bits
- 203 0 through 6; 8 through 15
- 203 12 meters (39.37 feet)
- 203 Internal and external
- 203 <TABLE ROW>
- 203 1. Address 7 is reserved for host controller use on all buses.
- 204 SCSI:restrictions
- 204 SCSI:restrictions
- 204 SCSI:restrictions
- 204 • Cables
- 204 • Cables
- 204 • Terminators
- 204 • Number of Devices Per SCSI Bus
- 204 • Considerations for Selecting SCSI Devices
- 204 NOTE The Ultra Narrow, single-ended SCSI bus supports only 7 devices because address 7 is reserve...
- 204 cables
- 204 cables
- 204 <TABLE>
- 204 TableB2. Ultra Narrow Single-Ended SCSI Cables
- 204 <TABLE HEADING>
- 204 <TABLE ROW>
- 204 Cable Number
- 204 Cable Length
- 204 Description
- 204 <TABLE BODY>
- 204 <TABLE ROW>
- 204 C2955A
- 204 0.5m
- 204 50-pin HDTS to 50-pin HDTS
- 204 <TABLE ROW>
- 204 C2908A
- 204 1.0m
- 204 <TABLE ROW>
- 204 C2956A
- 204 1.5m
- 204 <TABLE ROW>
- 204 C2957A
- 204 2.0m
- 205 <TABLE>
- 205 TableB3. Ultra2 Wide Low-Voltage Differential SCSI Cables
- 205 <TABLE HEADING>
- 205 <TABLE ROW>
- 205 Cable Number
- 205 Cable Length
- 205 Description
- 205 <TABLE BODY>
- 205 <TABLE ROW>
- 205 C2978A
- 205 0.5m
- 205 68-pin HDTS to 68-pin HDTS
- 205 <TABLE ROW>
- 205 C2979A
- 205 1.5m
- 205 <TABLE ROW>
- 205 C2911B
- 205 1.0m
- 205 <TABLE ROW>
- 205 C2924B
- 205 2.5m
- 205 <TABLE ROW>
- 205 C2361A
- 205 1.0m
- 205 68-pin VHDCI to 68-pin HDTS
- 205 <TABLE ROW>
- 205 C2362A
- 205 2.5m
- 205 <TABLE ROW>
- 205 C2363A
- 205 10.0m
- 205 <TABLE ROW>
- 205 C2365A
- 205 5.0m
- 205 CAUTION SCSI cables approved by HP are designed to function within the SCSI tolerances for HP dev...
- 205 NOTE See “determining scsi bus length” later in this Appendix to determine the total length of yo...
- 206 SCSI:terminators
- 206 SCSI:terminators
- 206 SCSI:terminators
- 206 CAUTION It is necessary to put a terminator on unused SCSI connectors on the back panel of the sy...
- 206 number of devices per SCSI bus
- 206 number of devices per SCSI bus
- 206 • Ultra Narrow Single-Ended SCSI bus
- 206 • Ultra Narrow Single-Ended SCSI bus
- 206 • Ultra2 Wide Low-Voltage Differential SCSI bus
- 206 considerations for selecting SCSI devices
- 206 considerations for selecting SCSI devices
- 208 SCSI:bus lengths
- 208 SCSI:bus lengths
- 208 SCSI:bus lengths
- 208 SCSI:Ultra Narrow Single-Ended
- 208 SCSI:Ultra Narrow Single-Ended
- 208 SCSI:Ultra Narrow Single-Ended
- 208 NOTE When calculating the total Ultra Narrow Single-Ended SCSI cable/bus/trace length used extern...
- 208 • For a total of one to four devices being connected to the NSE SCSI bus the total length of cabl...
- 208 • For a total of one to four devices being connected to the NSE SCSI bus the total length of cabl...
- 208 • For a total of five to eight devices being connected to the NSE SCSI bus the total length of ca...
- 208 NOTE Remember that the workstation is counted as one of the total device, and the internal length...
- 208 SCSI:Ultra2 Wide Low-Voltage Differential
- 208 SCSI:Ultra2 Wide Low-Voltage Differential
- 208 SCSI:Ultra2 Wide Low-Voltage Differential
- 209 NOTE When calculating the total Ultra2 Wide Low-Voltage Differential SCSI cable/bus/trace length ...
- 210 SCSI:device IDs
- 210 SCSI:device IDs
- 210 SCSI:device IDs
- 210 1. At a command line prompt, enter the following:
- 210 1. At a command line prompt, enter the following:
- 210 /usr/sbin/ioscan -f
- 211 assigning Ultra narrow single-ended SCSI device IDs
- 211 assigning Ultra narrow single-ended SCSI device IDs
- 211 CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont...
- 211 assigning Ultra2 wide low-voltage differential SCSI device IDs
- 211 assigning Ultra2 wide low-voltage differential SCSI device IDs
- 211 CAUTION Do not use SCSI device ID 7 for any device. It is reserved for the built-in SCSI bus cont...
- 212 SCSI:connecting to the ports
- 212 SCSI:connecting to the ports
- 212 SCSI:connecting to the ports
- 212 system SCSI port connection
- 212 system SCSI port connection
- 212 • Ultra Narrow, Single-Ended SCSI (NSE SCSI) connector
- 212 • Ultra Narrow, Single-Ended SCSI (NSE SCSI) connector
- 212 • Ultra2 Wide Low-Voltage Differential SCSI (LVD SCSI) connector
- 212 FigureB1. SCSI Ports
- 212 FigureB1. SCSI Ports
- 213 NOTE It is necessary to put a terminator on unused SCSI connectors on the rear panel, or the last...
- 215 related documentation
- 215 related documentation
- 216 installation manual
- 216 installation manual
- 216 • A4985-90010 -
- 216 • A4985-90010 -
- 216 service manuals
- 216 service manuals
- 216 • B2355-90040 - System Administration Tasks Manual HP 9000 Series 700
- 216 • B2355-90040 - System Administration Tasks Manual HP 9000 Series 700
- 216 • B3782-90176 -
- 216 • A4033-90099 - HP A4032/A4033 Color Monitors CE Handbook
- 216 • A4033-90099 - HP A4032/A4033 Color Monitors CE Handbook
- 216 reference manuals
- 216 reference manuals
- 216 • A7814-90000 -
- 216 • A7814-90000 -
- 217 Glossary
- 217 a
- 217 a
- 217 absolute pathname
- 217 absolute pathname
- 217 The full pathname of a file, including all the directories leading to it, starting with the root ...
- 217 See also file, filename, pathname.
- 217 access permissions
- 217 access permissions
- 217 Settings that allow (or prevents) a user or group of users to read, write, or execute files
- 217 See also file access permissions.
- 217 active window
- 217 active window
- 217 The window that is receiving input from the keyboard at the present time. If there is no active w...
- 217 ANSI
- 217 ANSI
- 217 The American National Standards Institute, a non-profit organization, made up of various expert c...
- 217 argument
- 217 argument
- 217 A part of a command line or line of source code that identifies the file, directory, or other dat...
- 217 attachment unit interface (AUI)
- 217 attachment unit interface (AUI)
- 217 A transceiver cable that conforms to IEEE 802.3 specifications.
- 217 b
- 217 b
- 217 back up
- 217 back up
- 217 v. To make a copy of one or more files on a tape or disk that can be stored separately from the o...
- 217 backup
- 217 backup
- 217 n. A spare copy of one or more files on a tape or disk that can be used to restore data into its ...
- 217 bitmap
- 217 bitmap
- 217 Generally speaking, an array of data bits that define a graphical image. Strictly speaking, a bit...
- 217 boot
- 217 boot
- 217 Short for “bootstrap,” from the phrase “pulling oneself up by one’s bootstraps.” Indicates the be...
- 218 boot console handler
- 218 boot console handler
- 218 The interactive firmware that enables you to interact with the hardware of your workstation befor...
- 218 boot ROM
- 218 boot ROM
- 218 A read-only memory that is incorporated into a workstation for the purpose of loading and startin...
- 218 bootstrap service
- 218 bootstrap service
- 218 See boot.
- 218 byte
- 218 byte
- 218 A fundamental character-code unit, usually consisting of 8 bits.
- 218 c
- 218 c
- 218 CD-RAM
- 218 CD-RAM
- 218 Compact Disk Random-Access Memory.
- 218 See also CD-RAM disk, CD-RAM drive.
- 218 CD-RAM disk
- 218 CD-RAM disk
- 218 CD-RAM disks are identical to the audio compact disks (CDs) used to record stereo music, except c...
- 218 CD-RAM drive
- 218 CD-RAM drive
- 218 A random-access, read/write, mass-storage device that uses removable CD-RAM disks. The drive cont...
- 218 CD-ROM
- 218 CD-ROM
- 218 Compact Disk Read-Only Memory.
- 218 See also CD-ROM disk, CD-ROM drive.
- 218 CD-ROM disk
- 218 CD-ROM disk
- 218 CD-ROM disks are identical to the audio compact disks (CDs) used to record stereo music, except t...
- 218 CD-ROM drive
- 218 CD-ROM drive
- 218 A random-access, read-only, mass-storage device that uses removable CD-ROM disks. The drive conta...
- 219 Central Processing Unit (CPU)
- 219 Central Processing Unit (CPU)
- 219 The part of a workstation that interprets and executes instructions; the “brain.”
- 219 child directory
- 219 child directory
- 219 See subdirectory.
- 219 click
- 219 click
- 219 To press and immediately release a mouse button. The term comes from the fact that pressing and r...
- 219 cluster
- 219 cluster
- 219 A group of workstations connected via a Local Area Network (LAN). One workstation, the cluster se...
- 219 See also cluster client, cluster node, cluster server.
- 219 cluster client.
- 219 cluster client.
- 219 A cluster node that does not have a local HP-UX file system. Its file system resides on the clust...
- 219 See also cluster, cluster node, cluster server.
- 219 cluster node
- 219 cluster node
- 219 A member of a group of workstations connected via a Local Area Network (LAN). One workstation, th...
- 219 See also cluster, cluster client, cluster server.
- 219 cluster server
- 219 cluster server
- 219 A workstation that provides file access, login access, file transfer, printing, and other service...
- 219 See also cluster, cluster client, cluster node, host.
- 219 cold install.
- 219 cold install.
- 219 A process that requires the booting of an install kernel from an install server over a network or...
- 219 command.
- 219 command.
- 219 An instruction that you enter into the system at a prompt, to execute a program or perform a task.
- 219 See also shell command.
- 219 command argument
- 219 command argument
- 219 Information you provide on a command line to describe the object (often a file or directory) to b...
- 220 command interpreter
- 220 command interpreter
- 220 A program that reads lines of text from standard input (typed at the keyboard or read from a file...
- 220 See also shell.
- 220 command option
- 220 command option
- 220 Information you provide on a command line to indicate any special action you want the command to ...
- 220 See also default.
- 220 configuration
- 220 configuration
- 220 The arrangement of a workstation or network as defined by the nature, number, and chief character...
- 220 console.
- 220 console.
- 220 The tty (terminal) the system was booted from. The console is associated with the monitor where a...
- 220 control key sequence
- 220 control key sequence
- 220 A keystroke combination used as a shorthand way of specifying commands. To enter a control key se...
- 220 cpu
- 220 cpu
- 220 See Central Processing Unit.
- 220 current directory
- 220 current directory
- 220 See current working directory.
- 220 current session
- 220 current session
- 220 The work and processes that have been created since you logged into the system (and before you lo...
- 220 See also session.
- 220 current working directory
- 220 current working directory
- 220 The directory from which a relative-pathname search begins, as well as the directory in which you...
- 220 cursor
- 220 cursor
- 220 The small, usually blinking, box or underline displayed in whatever screen or window is active at...
- 220 d
- 220 d
- 221 daisy-chaining
- 221 daisy-chaining
- 221 A method of connecting devices in which the signal passes from one device to the next in serial f...
- 221 DDS tape drive
- 221 DDS tape drive
- 221 A device that stores data on Digital Data Storage (DDS) cassettes.
- 221 default
- 221 default
- 221 Most commands give you a choice of one or more options. If you don’t specify an option, the comma...
- 221 See also command option.
- 221 dialog box
- 221 dialog box
- 221 A special type of HP CDE screen that contains controls and settings, and with which the user can ...
- 221 DIMM
- 221 DIMM
- 221 See Dual In-line Memory Module.
- 221 Dual In-line Memory Module
- 221 Dual In-line Memory Module
- 221 A memory board whose connectors on each side of the board are connected to different chips. This ...
- 221 directory
- 221 directory
- 221 A special type of “container” object that contains information about the objects beneath it in th...
- 221 See also file.
- 221 disk
- 221 disk
- 221 A thin, round plate with a magnetic or optical surface coating on which data is stored by magneti...
- 221 disked workstation
- 221 disked workstation
- 221 A workstation that has its own hard disk drive.
- 221 diskette
- 221 diskette
- 221 See floppy diskette.
- 221 double click
- 221 double click
- 221 To press and release a mouse button twice in rapid succession. The amount of time that discrimina...
- 222 drag
- 222 drag
- 222 To move the mouse (and hence the pointer on the screen) while holding down one or more of its but...
- 222 See also drop.
- 222 drive
- 222 drive
- 222 See CD-ROM drive, DDS tape drive, floppy drive, hard disk drive
- 222 drop
- 222 drop
- 222 To release the mouse button after having moved the mouse with its button held down, in order to p...
- 222 See also drag.
- 222 e
- 222 e
- 222 EEPROM.
- 222 EEPROM.
- 222 Electronically erasable read-only memory. Usually bytes or words can be erased and reprogrammed i...
- 222 environment
- 222 environment
- 222 The conditions in which your commands or programs are executed. These conditions include your wor...
- 222 See also environment variables.
- 222 environment variables
- 222 environment variables
- 222 The set of defined shell variables (some of which are PATH, TERM, SHELL, EXINIT, and HOME) that d...
- 222 See also environment.
- 222 Ethernet
- 222 Ethernet
- 222 The LAN developed jointly by Digital Equipment Corporation, Intel, and Xerox Corporation, upon wh...
- 222 f
- 222 f
- 222 Fast Narrow Single-Ended SCSI
- 222 Fast Narrow Single-Ended SCSI
- 222 An 8-bit-wide SCSI bus with standard receivers and drivers that runs at 20 Mbytes/second, which a...
- 223 See also Ultra2 Wide Low-Voltage Differential SCSI, Small Computer System Interface.
- 223 file
- 223 file
- 223 The basic named unit of data stored on disk
- 223 See also directory, filename.
- 223 file access permissions
- 223 file access permissions
- 223 The access rights given to a particular file or directory. Every file and directory has a set of ...
- 223 See also access permissions.
- 223 File Manager
- 223 File Manager
- 223 The HP CDE application that allows you to manage your files and directories, and to set viewing p...
- 223 filename
- 223 filename
- 223 The name given to a particular file
- 223 See also absolute pathname, file, pathname.
- 223 file server
- 223 file server
- 223 A workstation whose primary task is to control the storage and retrieval of data from hard disks....
- 223 file system
- 223 file system
- 223 The hierarchically organized set of files and directories on a hard disk.
- 223 firmware
- 223 firmware
- 223 The control software that is embedded in ROM and is always resident regardless of the status of t...
- 223 floppy diskette
- 223 floppy diskette
- 223 A thin, flexible, disk-shaped sheet of plastic that magnetically stores data on its coated surfac...
- 223 floppy drive
- 223 floppy drive
- 223 A device that stores data on a floppy diskette.
- 223 h
- 223 h
- 223 hard disk
- 223 hard disk
- 223 A type of disk that is rigid—often aluminum—as opposed to a thin plastic diskette, which is flexi...
- 224 hard disk drive
- 224 hard disk drive
- 224 A device that stores data on a hard disk. The hard disk can be a permanent part of the drive and ...
- 224 Help Manager
- 224 Help Manager
- 224 The HP CDE application that provides online help.
- 224 $HOME
- 224 $HOME
- 224 The environment variable that contains the name of a user’s home directory. This is the directory...
- 224 See also home directory.
- 224 home directory
- 224 home directory
- 224 A shorthand way of referring to a frequently used directory, almost always the login directory.
- 224 host
- 224 host
- 224 A computer that offers one or more services; may be local or remote (accessible via a network)
- 224 See also cluster server.
- 224 host name
- 224 host name
- 224 See internet protocol address.
- 224 HP CDE
- 224 HP CDE
- 224 See HP Common Desktop Environment.
- 224 HP Common Desktop Environment
- 224 HP Common Desktop Environment
- 224 A user interface that draws a graphical layer over the complexities of the other layers of the sy...
- 224 HP-UX.
- 224 HP-UX.
- 224 This is Hewlett-Packard’s version of the UNIX® operating system.
- 224 HP-UX cluster
- 224 HP-UX cluster
- 224 See cluster node, cluster server.
- 224 i
- 224 i
- 224 icon
- 224 icon
- 224 A small, graphic representation of an object. Objects can be “iconized” (turned into icons) to cl...
- 224 iconify
- 224 iconify
- 224 See iconize.
- 224 iconize
- 224 iconize
- 224 To turn a window or shell into an icon
- 225 See also icon.
- 225 Initial System Loader
- 225 Initial System Loader
- 225 The program that actually controls the loading of the operating system.
- 225 input device
- 225 input device
- 225 Any of several pieces of hardware equipment used to give information to a system. Examples includ...
- 225 See also output device.
- 225 input window
- 225 input window
- 225 The window that displays a program’s prompt and any commands typed but not yet executed.
- 225 Instant Ignition.
- 225 Instant Ignition.
- 225 When the user’s computer is turned on and it automatically boots up and is ready for use. Instant...
- 225 install server.
- 225 install server.
- 225 This is a networked computer from which file sets and operating systems can be installed.
- 225 internet protocol address (IP address)
- 225 internet protocol address (IP address)
- 225 A string of characters, in the format nnn.nnn.nnn.nnn, that uniquely identifies a workstation in ...
- 225 invisible filename
- 225 invisible filename
- 225 A filename in which the first character is a period (.). Invisible filenames are not displayed by...
- 225 IP address
- 225 IP address
- 225 See internet protocol address.
- 225 ISL
- 225 ISL
- 225 See Initial System Loader.
- 225 k-l
- 225 k-l
- 225 kernel
- 225 kernel
- 225 The part of the operating system that is an executable piece of code responsible for managing the...
- 225 LAN
- 225 LAN
- 225 See local area network.
- 225 LAN station address
- 225 LAN station address
- 225 See local area network station address.
- 225 link
- 225 link
- 225 n. A special object that contains the name of another object. When you specify a link as a pathna...
- 226 local area network (LAN)
- 226 local area network (LAN)
- 226 A data communications system that allows a number of independent devices to communicate with each...
- 226 local area network system address
- 226 local area network system address
- 226 The label that uniquely identifies the local area network (LAN) connection for your workstation a...
- 226 log in
- 226 log in
- 226 v. To initially sign on to the system so that you may begin to use it. This creates your first us...
- 226 login
- 226 login
- 226 n. A session. Or, a string of characters that uniquely identifies a user of the system
- 226 See also session, user account, and username.
- 226 login directory
- 226 login directory
- 226 The directory in which you are placed when you log in, usually your home directory
- 226 See also home directory.
- 226 Login Manager
- 226 Login Manager
- 226 The program that controls the initial startup of HP CDE and accepts the user’s username and password
- 226 login script
- 226 login script
- 226 The shell program that runs at each login, and sets the login environment for your system.
- 226 m
- 226 m
- 226 menu bar
- 226 menu bar
- 226 An area at the top or bottom of a window that contain the titles of the pull-down or pop-up menus...
- 226 minimize button
- 226 minimize button
- 226 In HP CDE, a push-button on the window frame that turns a screen into an icon.
- 226 See also icon, iconize.
- 226 monitor type.
- 226 monitor type.
- 226 A monitor path name (graphics(1) through graphics(6)) that is associated with a particular resolu...
- 227 mouse pointer
- 227 mouse pointer
- 227 See pointer.
- 227 n
- 227 n
- 227 name
- 227 name
- 227 A character string associated with a file, directory, or link. A name can include various alphanu...
- 227 See also pathname.
- 227 network
- 227 network
- 227 Two or more workstations sharing information
- 227 See also cluster, workstation.
- 227 network controller
- 227 network controller
- 227 A printed circuit board that passes bit streams between the network and the main memory of the wo...
- 227 node
- 227 node
- 227 A computer that is on a network. Each node in the network can use the data, programs, and devices...
- 227 See also disked workstation, diskless workstation, workstation.
- 227 node name
- 227 node name
- 227 A unique identifying name given to a workstation in a cluster
- 227 See also cluster, node.
- 227 nonvolatile memory
- 227 nonvolatile memory
- 227 System memory that retains its contents even after workstation power is turned off.
- 227 o
- 227 o
- 227 object
- 227 object
- 227 Any file, directory, or link in the network. See also directory, file, link, pathname.
- 227 operating system
- 227 operating system
- 227 The program that supervises the execution of other programs on your workstation. For example, the...
- 227 See also kernel.
- 227 option
- 227 option
- 227 See command option.
- 227 output device
- 227 output device
- 227 Any of several pieces of hardware used for receiving messages from the computer and storing them,...
- 227 See also input device.
- 227 output window
- 227 output window
- 227 The window that displays a process response to your command.
- 228 p
- 228 p
- 228 parent directory
- 228 parent directory
- 228 A directory that contains other directories, each of which is then called a subdirectory
- 228 See also subdirectory.
- 228 password
- 228 password
- 228 The secret word you enter next to the password prompt at login time to permit only authorized acc...
- 228 See also user account.
- 228 path
- 228 path
- 228 The hardware address of a device that is attached to the I/O system of your workstation.
- 228 pathname
- 228 pathname
- 228 A slash/separated series of zero or more directory names followed by a filename, that together de...
- 228 See also name, object.
- 228 permissions
- 228 permissions
- 228 A set of rights (read, write, execute) associated with an object in the file system. Determines w...
- 228 PID
- 228 PID
- 228 Process Identifier. Also referred to as a process ID
- 228 See also process ID.
- 228 PIM.
- 228 PIM.
- 228 Processor Internal Memory. The pim command is a command used by the Boot Console Interface for de...
- 228 See also processor internal memory.
- 228 pointer
- 228 pointer
- 228 Sometimes called the “mouse pointer,” the pointer’s location on the display corresponds to the mo...
- 228 process
- 228 process
- 228 A computing environment in which you may execute programs; a program currently running in the sys...
- 229 process ID
- 229 process ID
- 229 A unique identification number assigned to all processes by the operating system. Also referred t...
- 229 See also PID.
- 229 processor internal memory.
- 229 processor internal memory.
- 229 A storage area in a processor (for example, EEPROM) that is set at the time of a high-priority ma...
- 229 program.
- 229 program.
- 229 A unit of executable code, in source-code or binary form. Most HP-UX commands and routines consis...
- 229 prompt
- 229 prompt
- 229 A message or symbol displayed by the system to let you know that it is ready for your input.
- 229 push button
- 229 push button
- 229 A graphic control that simulates a real-life push button. Use the pointer and mouse to push the b...
- 229 r-s
- 229 r-s
- 229 RAM
- 229 RAM
- 229 Random-access memory.
- 229 ROM
- 229 ROM
- 229 Read-only memory.
- 229 root
- 229 root
- 229 See superuser.
- 229 scroll bar
- 229 scroll bar
- 229 A vertical or horizontal bar located on the side or bottom of a window that allows the user to vi...
- 229 SCSI
- 229 SCSI
- 229 See Small Computer System Interface.
- 229 SCSI ID.
- 229 SCSI ID.
- 229 The address of a peripheral device connected to a SCSI bus.
- 229 server
- 229 server
- 229 A program that controls all access to input and output devices.
- 229 session
- 229 session
- 229 The time between when you log in and when you log out. Also called a “work session” or a “login s...
- 229 See also current session.
- 229 shell
- 229 shell
- 229 A command-line interpreter program used to invoke programs. Some examples of HP-UX shells are the...
- 229 See also command interpreter.
- 230 shell command
- 230 shell command
- 230 An instruction you give the system to execute a utility program or shell script
- 230 See also shell script, utility program.
- 230 shell script
- 230 shell script
- 230 A file that contains commands that the system can interpret and run in a shell.
- 230 shutdown
- 230 shutdown
- 230 The process of taking the system from multi-user state to system administration state.
- 230 slider
- 230 slider
- 230 One of the components of a scroll bar. The slider is the object that is dragged along the scroll ...
- 230 Small Computer System Interface (SCSI)
- 230 Small Computer System Interface (SCSI)
- 230 An IEEE standard for interfacing a computer to multiple, disparate high-speed peripherals such as...
- 230 See also Ultra2 Wide Low-Voltage Differential SCSI, Fast Narrow Single-Ended SCSI.
- 230 SPA.
- 230 SPA.
- 230 Soft Physical Address.
- 230 See also soft physical address.
- 230 soft physical address.
- 230 soft physical address.
- 230 This is a location in system memory associated with the DIMM cards.
- 230 standalone
- 230 standalone
- 230 A workstation that is not part of a cluster
- 230 See also cluster.
- 230 Style Manager
- 230 Style Manager
- 230 The HP CDE application that provides the ability to customize various user-interface aspects of y...
- 230 subdirectory
- 230 subdirectory
- 230 A directory that is located in, or anywhere on a path below, another directory. The directory abo...
- 230 See also parent directory.
- 230 superuser
- 230 superuser
- 230 A user with permission to enter any directory and make changes to files and programs that typical...
- 231 system administrator
- 231 system administrator
- 231 The person responsible for system and network installation, updating, maintenance, and security a...
- 231 system call
- 231 system call
- 231 Invocation of a kernel process by a user program.
- 231 system name
- 231 system name
- 231 See internet protocol address.
- 231 t-u
- 231 t-u
- 231 terminal window
- 231 terminal window
- 231 A terminal window is a type of HP CDE window that emulates a complete display terminal. Terminal ...
- 231 See also HP Common Desktop Environment.
- 231 title bar
- 231 title bar
- 231 The rectangular area, between the top of the window and the window frame, that contains the title...
- 231 TOC.
- 231 TOC.
- 231 See transfer of control.
- 231 transceiver
- 231 transceiver
- 231 A device that transmits and receives signals.
- 231 transfer of control.
- 231 transfer of control.
- 231 Saves the state of the processor in Processor Internal Memory (PIM) and pending I/O operations ar...
- 231 Ultra2 Wide Low-Voltage Differential SCSI
- 231 Ultra2 Wide Low-Voltage Differential SCSI
- 231 A 16-bit-wide bus with low-power receivers and drivers, which allows a cable length of up to 12 m...
- 231 See also Fast Narrow Single-Ended SCSI, Small Computer System Interface.
- 231 user account
- 231 user account
- 231 The system administrator defines a user account for every person authorized to use the system. Ea...
- 232 See also user ID, password.
- 232 user ID
- 232 user ID
- 232 The name the computer uses to identify you. Your system administrator assigns you a user ID. Ente...
- 232 See also user account.
- 232 username
- 232 username
- 232 The name that the system recognizes as uniquely yours. Also known as your “login name.” The usern...
- 232 utility
- 232 utility
- 232 See utility program.
- 232 utility program
- 232 utility program
- 232 A program provided with the operating system to perform a frequently required task, such as print...
- 232 See also command, shell command.
- 232 w
- 232 w
- 232 window
- 232 window
- 232 A rectangular area of the screen for viewing information. HP CDE allows you to create several typ...
- 232 See also Workspace Manager.
- 232 Window Manager
- 232 Window Manager
- 232 The HP CDE program that controls the size, placement, and operation of windows.
- 232 working directory
- 232 working directory
- 232 See current working directory.
- 232 Workspace
- 232 Workspace
- 232 What the screen becomes when you start HP CDE. Although you can hide the workspace under terminal...
- 232 See also HP Common Desktop Environment, terminal window.
- 232 Workspace Manager
- 232 Workspace Manager
- 232 The program that controls the size, placement, and operation of windows on the HP CDE Workspace. ...
- 232 See also Window Manager.
- 232 workstation
- 232 workstation
- 232 A compact, graphics-oriented computer having high speed and high memory capacity. A workstation u...
- 233 See also node, disked workstation, diskless workstation.
- 235 Symbols
- 235 A
- 235 B
- 235 C
- 236 D
- 236 E
- 236 F
- 237 H
- 237 I
- 237 K
- 237 L
- 237 M
- 237 N
- 238 O
- 238 P
- 238 R
- 238 S
- 239 T
- 239 U