Daylight Saving Time. Yealink SIP-T29G, SIP-T46G, SIP-T27P, SIP-T48G, SIP-T21(P) E2, SIP-T.23P/G, SIP-T19(P) E2, SIP-T42G, SIP-T41P, CP860 SERIES
Tangazo
Tangazo
Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
3.
Enter the time in the Time(HMS) field.
4.
Press the Save soft key to accept the change.
To configure the time and date formats via phone user interface:
1.
Press Menu->Settings->Basic Settings->Time & Date->Time & Date Format.
2.
Press or , or the Switch soft key to select the desired time format from the
Time Format field.
3.
Press or , or the Switch soft key to select the desired date format from the
Date Format field.
4.
Press the Save soft key to accept the change.
Daylight Saving Time (DST) is the practice of temporary advancing clocks during the summer time so that evenings have more daylight and mornings have less. Typically, clocks are adjusted forward one hour at the start of spring and backward in autumn.
Many countries have used the DST at various times, details vary by location. By default, the DST is set to Automatic, so it can be adjusted automatically from the current time zone configuration. You can configure DST for the desired area as required.
Procedure
Daylight saving time can be configured using the configuration files or locally.
Configuration File
Local
<MAC>.cfg
Web User Interface
Configure DST.
Parameters: local_time.summer_time local_time.dst_time_type local_time.start_time local_time.end_time local_time.offset_time
Configure DST.
Navigate to: http://<phoneIPAddress>/servlet
?p=settings-datetime&q=load
Details of Configuration Parameters:
Parameters Permitted Values Default local_time.summer_time 0, 1 or 2 2
156
Configuring Basic Features
Parameters Permitted Values Default
Description:
Configures Daylight Saving Time (DST) feature.
0-Disabled
1-Enabled
2-Automatic
Web User Interface:
Settings->Time & Date->Daylight Saving Time
Phone User Interface:
Menu->Settings->Basic Settings->Time & Date->SNTP Settings->Daylight Saving local_time.dst_time_type 0 or 1 0
Description:
Configures the DST time type.
0-DST by Date
1-DST by Week
Note: It works only if the value of the parameter “local_time.summer_time” is set to 1
(Enabled).
Web User Interface:
Settings->Time & Date->Fixed Type
Phone User Interface:
None local_time.start_time Time 1/1/0
Description:
Configures the start time of the DST.
Value formats are:
Month/Day/Hour (for DST by Date)
Month/Week of Month/Day of Week/Hour of Day (for DST by Week)
If “local_time.dst_time_type” is set to 0 (DST by Date), use the mapping:
Month: 1=January, 2=February,…, 12=December
Day: 1=the first day in a month,…, 31= the last day in a month
Hour: 0=0am, 1=1am,…, 23=11pm
If “local_time.dst_time_type” is set to 1 (DST by Week), use the mapping:
Month: 1=January, 2=February,…, 12=December
157
Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Parameters Permitted Values Default
Week of Month: 1=the first week in a month,…, 5=the last week in a month
Day of Week: 1=Monday, 2=Tuesday,…, 7=Sunday
Hour of Day: 0=0am, 1=1am,…, 23=11pm
Note: It works only if the value of the parameter “local_time.summer_time” is set to 1
(Enabled).
Web User Interface:
Settings->Time & Date->Start Date
Phone User Interface:
None local_time.end_time Time 12/31/23
Description:
Configures the end time of the DST.
Value formats are:
Month/Day/Hour (for DST by Date)
Month/Week of Month/Day of Week/Hour of Day (for DST by Week)
If “local_time.dst_time_type” is set to 0 (DST by Date), use the mapping:
Month: 1=January, 2=February,…, 12=December
Day: 1=the first day in a month,…, 31= the last day in a month
Hour: 0=0am, 1=1am,…, 23=11pm
If “local_time.dst_time_type” is set to 1 (DST by Week), use the mapping:
Month: 1=January, 2=February,…, 12=December
Week of Month: 1=the first week in a month,…, 5=the last week in a month
Day of Week: 1=Monday, 2=Tuesday,…, 7=Sunday
Hour of Day: 0=0am, 1=1am,…, 23=11pm
Note: It works only if the value of the parameter “local_time.summer_time” is set to 1
(Enabled).
Web User Interface:
Settings->Time & Date->End Date
Phone User Interface:
None local_time.offset_time Integer from -300 to 300 Blank
Description:
Configures the offset time (in minutes) of DST.
158
Configuring Basic Features
Parameters Permitted Values Default
Note: It works only if the value of the parameter “local_time.summer_time” is set to 1
(Enabled).
Web User Interface:
Settings->Time & Date->Offset(minutes)
Phone User Interface:
None
To configure the DST via web user interface:
1.
Click on Settings->Time & Date.
2.
Select Disabled from the pull-down list of Manual Time.
3.
Select the desired time zone from the pull-down list of Time Zone.
4.
Enter the domain names or IP addresses in the Primary Server and Secondary
Server fields respectively.
5.
Enter the desired time interval in the Synchronism (15~86400s) field.
6.
Mark the Enabled radio box in the Daylight Saving Time field.
Mark the DST by Date radio box in the Fixed Type field.
Enter the start time in the Start Date field.
Enter the end time in the End Date field.
Mark the DST by Week radio box in the Fixed Type field.
159
Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Select the desired values of DST Start Month, DST Start Week of Month, DST
Start Day of Week, Start Hour of Day; DST Stop Month, DST Stop Week of
Month, DST Stop Day of Week and End Hour of Day from the pull-down lists.
7.
Enter the desired offset time in the Offset(minutes) field.
8.
Click Confirm to accept the change.
160
The time zone and corresponding DST pre-configurations exist in the AutoDST file. If the
DST is set to Automatic, the IP phone obtains the DST configuration from the AutoDST file.
You can customize the AutoDST file if required. The AutoDST file allows you to add or modify time zone and DST settings for your area each year.
Before customizing, you need to obtain the AutoDST file. You can ask the distributor or
Yealink FAE for DST template. You can also obtain the DST template online: http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage . For more information on obtaining the template file, refer to
Obtaining Configuration Files and
The following table lists description of each element in the template file:
Element Type Values Description
DSTData required no
DST required no
File root element
Time Zone item’s root element szTime szZone required [+/-][X]:[Y], X=0~14, Y=0~59 Time Zone required
String (if the content is more than one city, it is the best to
Time Zone name
Configuring Basic Features
Element Type Values keep their daylight saving time the same)
Description iType optional
0/1
0: DST by Date
1: DST by Week
DST time type
(This item is needed if you want to configure
DST.) szStart szEnd szOffset optional
Month/Day/Hour (for iType=0)
Month: 1~12
Day: 1~31
Hour: 0 (midnight)~23
Month/Week of Month/Day of
Week/Hour of Day (for iType=1)
Month: 1~12
Week of Month: 1~5 (the last week)
Day of Week: 1~7
Hour of Day: 0 (midnight)~23 optional Same as szStart optional Integer from -300 to 300
Start time of the DST
End time of the DST
The offset time (in minutes) of DST
When customizing an AutoDST file, learn the following:
<DSTData> indicates the start of a template and </DSTData> indicates the end of a template.
Add or modify time zone and DST settings between <DSTData> and </DSTData>.
The display order of time zone is corresponding to the szTime order specified in the
AutoDST.xml file.
If the start time of DST is greater than the end time, the valid time of DST is from the start time of this year to the end time of the next year.
Customizing an AutoDST file:
1.
Open the AutoDST file using an ASCII editor.
2.
Add or modify time zone and DST settings as you want in the AutoDST file.
161
Administrator’s Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Example 1:
To modify the DST settings for the existing time zone “+5 Pakistan(Islamabad)” and add DST settings for the existing time zone “+5:30 India(Calcutta)”.
Example 2:
Add a new time zone (+6 Paradise) with daylight saving time 30 minutes.
162
3.
Save this file and place it to the provisioning server (e.g., 192.168.1.100).
4.
Specify the access URL of the AutoDST file in the configuration files.
Procedure
The access URL of the AutoDST file can be specified using the configuration files.
Configuration File <MAC>.cfg
Specify the access URL of the
AutoDST file.
Parameters: auto_dst.url
Configuring Basic Features
Details of Configuration Parameters:
Parameters Permitted Values Default auto_dst.url URL within 511 characters Blank
Description:
Configures the access URL of the AutoDST file (AutoDST.xml).
Example: auto_dst.url = tftp://192.168.1.100/AutoDST.xml
During the auto provisioning process, the IP phone connects to the provisioning server “192.168.1.100”, and downloads the AutoDST file “AutoDST.xml”. After update, you will find a new time zone “Paradise” and updated DST of “Pakistan
(Islamabad)” and “India (Calcutta)" via web user interface: Settings->Time &
Date->Time Zone.
Note: It works only if the value of the parameter "local_time.summer_time" is set to 2
(Automatic).
Web User Interface:
None
Phone User Interface:
None
IP phones support multiple languages. Languages used on the phone user interface and web user interface can be specified respectively as required.
The following table lists languages supported by the phone user interface and the web user interface.
Phone/Web User Interface
English
Chinese Simplified
Chinese Traditional
French
German
Italian
Polish
Portuguese
Spanish
163
Pakua
Tangazo