SETTING A WATERING SCHEDULE
1. Turn the dial to the WATER DAYS position.
2. The display will show the last program selected ( A , B , or C ). You can switch to another program by pressing the
PRG button.
3. The controller displays currently programmed active day schedule information. You can choose to water on specific days of the week, or you can choose interval watering, or choose to water on odd days or even days. Each program can operate using only one type of water day option.
Selecting Specific Days of the Week to Water
1. Press the + button to activate a particular day of the week to water (the display always starts with Monday). Press the button to cancel watering for that day. After pressing a button, the display automatically advances to the next day.
A icon indicates a water day.
A icon indicates a no water day.
2. After programming, set dial to the RUN position to enable automatic execution of all selected programs and start times.
Selecting Odd or Even Days to Water
This feature uses numbered day(s) of the month for watering instead of specific days of the week (odd days: 1st, 3rd, 5th, etc.; even days: 2nd, 4th, 6th, etc.)
1. With the cursor on SUN in specific days of the week mode press the → button once. ODD will flash on the screen.
2. If even day watering is desired, press the - button once. EVEN will flash on the screen. You can move back and forth from
ODD to EVEN by pressing the - button.
3. Once you selected odd or even day watering, turn the dial back to the RUN TIMES position.
NOTE: The 31st of any month and February
29th are always “OFF” days if Odd day watering is selected.
27
28
SETTING A WATERING SCHEDULE
(CONTINUED)
Selecting Interval Watering
This feature is convenient if you want to have a more consistent watering schedule without having to worry about the day of the week or the date. The interval you select is the amount of days between watering including the watering day.
1. Turn the dial to the WATER DAYS position. The water drop above Monday should be flashing.
2. Press the → button until EVEN is flashing, then press the → button one more time. The display will change to the interval mode and the Interval Day number will be flashing.
3. Press the + button. The display will now show two numbers: the interval, and the days remaining in the interval.
4. The number of days between waterings, or the interval, will be flashing. Use the + and - buttons to select the number of days desired between waterings.
5. Press the → button. The days remaining in the interval are now flashing. Use the + and - buttons to select the number of days until the next desired watering. One day remaining means it will water the next day.
NOT: NOTE: : If any days are selected as non-water days at the bottom of the display, the Interval Day watering will exclude those days. For example, if the
Interval Days are set at 5 and Monday is a non-water day, the controller will water every 5th day, but never on a
Monday. If the interval water day falls on a Monday and Monday is a non-water day, the program would not water for 5 more days resulting in no irrigation for
10 days total.
