Network Connection. TCL Smart TV

Connections and Setup

Network Connection

Your TV will require an internet connection to operate all functions. Data usage charges may apply.

Please refer to your Internet Service Provider (ISP) for additional information.

To access the internet, you must subscribe to high speed broadband internet service from your internet service provider.

Your TV can be connected to your home network in two ways:

• Wired, using the RJ45 (LAN) connector on the back panel.

• Wireless, using the internal wireless or external wireless USB adapter and your home wireless network.

Note: The following instructions are just the usual ways to connect your TV to the wired or wireless network. The connection method may be different depending on your actual network configuration. If you have any questions about your home network, please refer to your ISP(Internet Service Provider).

Connecting to a wired Network

To connect to a wired network:

1. Ensure you have:

• An Ethernet cable long enough to reach your TV

• A router or modem with an available Ethernet port

• A high-speed internet connection

• An Ethernet (LAN) port on the back of the TV

2. Connect your Ethernet cable to the router and to the

Ethernet port on the back of the TV.

3. Use the Network & Internet menu to configure the TV.

LAN port

Router

Modem Internet

Connecting to a Wireless Network

To connect to a wireless network

1. Ensure you have:

• A router broadcasting a high-speed wireless signal

• A high-speed internet connection

2. Use the Network & Internet menu to configure the TV.

Modem Internet

Wireless router

Note: Please follow below steps to enter the Network & Internet menu.

1. Press on the remote control to display the Smart TV homepage.

2. Press ▲ / ◄ / ► to move the cursor to (Settings) on the right top of the screen and press OK to enter.

3. Press ▲ / ▼ to select Network & Internet , then press OK to enter the submenu and follow the on-screen guidance

to set up your network.

8