Paper Does Not Feed Properly/"No Paper" Error Occurs. Canon PIXMA MG2522, PIXMA MG2525, PIXMA MG2000/MG2520, PIXMA MG2550S, PIXMA MG2520 (MG2500 Series), PIXMA MG2545S, PIXMA MG2540S, PIXMA MG2550, PIXMA MG2540, PIXMA MG2555S

Canon PIXMA MG2525 is a versatile all-in-one printer that offers high-quality printing, copying, and scanning capabilities. With its compact design, it's perfect for home or small office use. Connect wirelessly to print and scan from your smartphone or tablet, and utilize the various printing options, including borderless printing and photo printing. Experience crisp text and vibrant colors with Canon's FINE technology, ensuring professional-looking documents and stunning photos. The MG2525 is user-friendly, featuring an intuitive operation panel and easy-to-use software, making it a breeze to operate.

Paper Does Not Feed Properly/"No Paper" Error Occurs

Check1 Make sure that paper is loaded.

Loading Paper

Check2 Make sure of the following when you load paper.

• When loading two or more sheets of paper, align the edges of the sheets before loading.

• When loading two or more sheets of paper, make sure that the paper stack does not exceed the paper load limit.

However, proper feeding of paper may not be possible at this maximum capacity depending on the type of paper or environmental conditions (either very high or low temperature and humidity). In such cases, reduce the sheets of paper you load at a time to less than half of the paper load limit.

• Always load the paper in portrait orientation, regardless of the printing orientation.

• When you load the paper, load the paper with the print side facing UP. Align the paper stack against the right side of the rear tray and slide the paper guide so that it just touches the left edge of the stack.

Loading Paper

Check3 Check to see if the paper you are printing on is not too thick or curled.

Media Types You Cannot Use

Check4 Make sure of the following when you load envelopes.

• When printing on envelopes, refer to Loading Paper , and prepare the envelopes before printing.

Once you have prepared the envelopes, load them in portrait orientation. If the envelopes are placed in landscape orientation, they will not feed properly.

Check5 Confirm that the media type and the paper size settings correspond with the loaded paper.

Check6 Make sure that there are not any foreign objects in the rear tray.

If the paper tears in the rear tray, see

Paper Jams

to remove it.

If there are any foreign objects in the rear tray, be sure to turn off the machine, unplug it from the power supply, then remove the foreign object.

136

Check7 Clean the paper feed roller.

Cleaning the Paper Feed Roller

Note

• Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.

137