SPECIFICATIONS. Bafo BF-7510
Add to My manuals40 Pages
Bafo BF-7510 is a multifunctional device that combines the features of a welding machine, a plasma cutter, and an air compressor. It is designed for both professional and home use, and it is ideal for a variety of tasks, including welding, cutting, and inflating tires. The device is powered by a 220V power supply and has a maximum welding current of 100A. It can weld a variety of materials, including steel, stainless steel, iron, and aluminum. The plasma cutter has a maximum cutting thickness of 12mm and can cut a variety of materials, including steel, stainless steel, iron, and aluminum.
advertisement
8 Specifications
Model
Radio
Frequency Band
Modulation Type
Operating Channels
11Mbps Wireless LAN USB Dongle
Complies with IEEE 802.11b
2400 ~ 2483.5MHz ( for US, Canada, and ETSI)
2400 ~ 2497MHz (for Japan)
CCK, BPSK, QPSK
IEEE 802.11b compliant
11 channels (US, Canada)
13 channels (ETSI)
14 channels (Japan)
Direct Sequence Spread Spectrum
1 / 2 / 5.5 / 11 Mbps
> +15dBm, 10mW/MHz for Japan
Radio Technology
Data Rate
Output Power
Receive sensitivity Min. -80dBm for 11Mbps (@BER 10E-5)
Min. -84dBm for 5.5/2/1 Mbps (@BER 10E-5)
Antenna Type Single chip antenna
Current Consumption 5V, Tx mode 350 mA (Max.),Rx mode 150 mA (Max.)
Interface USB1.1
Certification Radio: EU: ETS 300 328; USA: FCC Part 15C
Taiwan: DGT
EMC: EU ETS 300 826; USA: FCC Part 15B
Safety: EN60950
39
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class A computing device pursuant to
Part 15 of FCC Rules, which are designed to provide reasonable protection against electromagnetic interference in a commercial environment.
Changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CE MARK WARNING
This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
40
advertisement
Related manuals
advertisement
Table of contents
- 6 INTRODUCTION
- 6 The 11Mbps Wireless LAN USB Dongle
- 6 Feature
- 6 Hardware Description
- 6 Package Contents
- 7 System Requirements
- 8 NETWORK CONFIGURATION AND PLANNING
- 8 Wireless LAN Basic
- 8 Network Topology
- 10 Roaming
- 11 FOR WIN98SE, ME
- 11 Running the Auto Driver/Utility Installation
- 18 Inserting the Dongle
- 23 CONFIGURATION UTILITY
- 23 Using the configuration Utility
- 23 Status
- 25 Statistics
- 26 Site Survey
- 26 Encryption
- 27 Advanced
- 29 Profiles
- 29 About
- 30 How to Uninstall the configuration & Monitor Utility
- 32 INSTALLATION PROCEDURE UNDER WINDOWS XP
- 32 About Windows XP
- 32 Installing the Driver
- 32 Configuration Under WinXP
- 35 Uninstall Procedure Under WinXP
- 36 TROUBLESHOOTING
- 36 Adapter Installation Problems
- 36 Network Connection Problems
- 37 GLOSSARY
- 39 SPECIFICATIONS