Special Playback. Lorex SG850

Special Playback

✔

• During picture search, noise (horizontal bars) will appear in the picture.

• The sound is muted.

✔

• If still mode continues for

5 minutes or more, the

VCR will go into stop mode to avoid damaging the tape.

• If the image is unstable

(rolling vertically), adjust the tracking control to correct.

✔

• During recording check operations, recording is suspended momentarily.

Picture Search

1 Press the FF (or REW) button, during normal playback.

• The image can be seen while the tape is advanced (or rewound) at high speed.

2 To return to normal playback, press the PLAY button.

Still Image

1 Press the PAUSE/STILL button, during normal playback.

• A still image can be viewed.

2 To return to normal playback, press the PLAY button.

• With each press of the PAUSE/STILL button, the still image is advanced one image (frame).

Vertical Lock Control

During still image mode,

1 Press the TRACKING + button to reduce the vertical rolling of the image.

2 If it cannot be corrected, press the TRACKING - button.

Slow

1 With each press of the FF button, during still image mode, the slow speed will change as indicated below.

direction)

2 With each press of the REW button, during still image mode, the slow speed will change as indicated

(backward direction)

3 To return to normal playback, press the PLAY button.

Recording Check

During recording, press the REC CHECK button.

• The tape will be rewound for about 5 seconds and slow play mode will be performed. The VCR will then return to the previous recording mode.

Security 14” Monitor Combination

32

Security 14” Monitor Combination

Special Playback

Alarm Search

1 Press the Menu button two times to display the VCR initial menu.

2 Press the SHIFT button to select TAPE SEARCH

SELECT, then press the SHIFT button to display the TAPE SEARCH SELECT menu.

[TAPE SEARCH SELECT]

ALARM SEARCH

FF : - -

REW : - -

INDEX SEARCH

FF

REW

GO TO ZERO SEARCH

3 Move the hand mark( ) to FF or REW in the

Alarm Search mode as you want to search.

4 Press the SET -(or +) button to enter the number of alarm marks you want to search, press the SHIFT button to search forward or in reverse.

• The display returns to the normal screen.

• The VCR will locate the desired alarm recording and begin playback.

33