Power Options. Xerox EC8036 / EC8056

Getting Started

Power Options

The printer has two power switches. The main power switch, located behind the front door, controls the main power to the printer. The secondary power switch is the Power/Wake button on the control panel. The Power/Wake button controls power to the printer electronic components, and when powered off, initiates a software-controlled shutdown procedure. The preferred method to power on and off the printer is to use the Power/Wake button.

• To power on the printer, open the front door, then power on the main power switch. On the control panel, press the Power/Wake button.

• To enter Sleep mode, press the Power/Wake button.

Note:

• When in Sleep mode, the touch screen and scanner are powered off and unresponsive during a print job execution. To wake the printer manually, press the Power/Wake button.

• If Auto Power Off is enabled, the printer powers off automatically after the specified conditions are met. To enable Auto Power Off mode, contact your System Administrator. For details, refer to the System Administrator Guide at www.support.xerox.com

.

Caution: Do not plug or unplug the power cord while the printer is powered on.

RReessttaarrttiinngg,, PPllaacciinngg iinn SSlleeeepp M tthhee PPrriinntteerr

To restart the printer, place the printer in Sleep Mode, or power off the printer:

38 Xerox ® EC8036/EC8056 Color Multifunction Printer

User Guide

1. At the printer control panel, press the Power/Wake button.

Getting Started

2. Select an option.

• To restart the printer, touch Restart .

• To place the printer in Sleep Mode, touch Sleep .

In Sleep Mode, the touch screen goes dark and the Power/Wake button flashes.

• To power off the printer, touch Power Off .

• If the printer does not respond to a single press of the Power/Wake button, then press and hold the button for 5 seconds. A Please Wait message appears as the printer powers down.

After 10 seconds, the touch screen goes dark and the Power/Wake button flashes until the printer powers down.

3. If you are powering off the printer for an extended period, open the printer front door, then power off the main power switch.

Caution: Do not unplug the power cord while the printer powers down.

Xerox ® EC8036/EC8056 Color Multifunction Printer

User Guide

39