Connectors. WAGO CAN Gateway

WAGO CAN Gateway allows seamless communication and data exchange between devices in various industrial and automotive applications. With this device, you can bridge the gap between different CAN networks, ensuring efficient and reliable data transfer. Its compact design and flexible configuration options make it suitable for a wide range of applications.

22 Device Description

4.2.3 CAGE CLAMP

Connectors

WAGO-I/O-SYSTEM 750

750-658 CAN Gateway

Figure 4: CAGE CLAMP ® Connectors

Table 7: Legend for Figure “CAGE CLAMP ® Connectors“

Designation Connector Function

CAN-H 1 CAN high

CAN-GND

0 V

CAN ground

Supply voltage 0 V

Shield

CAN-L

+24 V

Shield

(screen)

Shield connection (DIN rail)

CAN low

Supply voltage +24 V

Shield connection (DIN rail)

Use shielded signal lines!

Only use shielded signal lines for analog signals and I/O modules which are equipped with shield clamps. Only then can you ensure that the accuracy and interference immunity specified for the respective I/O module can be achieved even in the presence of interference acting on the signal cable.

Manual

Version 1.2.1, valid from FW/HW-Version 01/01