4� Boot Menu. Biostar A68N-2100X, A68N-5600E, A68N-2100E, A68N-2100K
Biostar A68N-5600E is an advanced motherboard that supports the latest AMD Ryzen processors with an impressive array of features for enhanced performance and connectivity. It boasts dual-channel DDR4 memory support, enabling faster data transfer speeds and improved multitasking capabilities. With its integrated AMD Radeon Vega 8 Graphics, you can enjoy smooth visuals and exceptional gaming experiences without the need for a dedicated graphics card. Additionally, the motherboard offers multiple storage options, including SATA and M.2 interfaces, providing ample space for your storage needs.
Реклама
Реклама
4� Boot Menu
This menu allows you to setup the system boot options.
Setup Prompt Timeout
This item sets number of seconds to wait for setup activation key.
Options: 2 (Default)
Bootup NumLock State
This item selects the keyboard NumLock state.
Options: On (Default) / Off
Full Screen Logo Display
This item enables or disables Full Screen Logo Show function.
Options: Enabled (Default) / Disabled
Fast Boot
This item enables or disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options.
Options: Disabled (Default) / Enabled
»
Note
The following items appear only when you set the Fast Boot function to [Enabled]
SATA Support
Options: Last Boot HDD Only (Default) / All Sata Devices
VGA Support
If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post.
EFI driver will still installed with EFI OS.
Options: EFI Driver (Default) / Auto
22 | 4. Boot Menu
A68N-2100E / A68N-2100K / A68N-2100X / A68N-5600E
USB Support
If Disabled, all USB devices will NOT be available until after OS boot. If Partial Initial, USB Mass
Storage and specific USB port/device will NOT be available before OS boot. If Enabled, all USB devices will be available in OS and Post.
Options: Full Initial (Default) / Disabled / Partial Initial
PS2 Devices Support
If Disabled, PS2 devices will be skipped.
Options: Enabled (Default) / Disabled
Network Stack Driver Support
If Disabled, Network Stack Drivers will be skipped.
Options: Disabled (Default) / Enabled
Boot Flash protection
While enabled, it can't flash write and flash erase by SMI.
Options: Disabled (Default) / Enabled
Boot Success Beep
This item BIOS boot post beep message.
Options: Enabled (Default) / Disabled
CSM16 Parameters
GateA20 Active
UPON REQUEST - GA20 can be disabled using BIOS services. ALWAYS - do not allow disabling
GA20; this option in useful when any RT code is executed above 1MB.
Options: Upon Request (Default) / Always
Option ROM Messages
This item allows you to set display mode for Option ROM.
Options: Disabled (Default) / Enabled
4. Boot Menu | 23
Изтегляне
Реклама