SETTINGS CONFIGURATION AND MANAGEMENT
Tap the icon three times to return to the home screen.
The phone reboots to apply the changes.
Related tasks
Configuring Legacy encryption mode on the phone
on page 81
Enabling EAP MD5 for 802.1x through the web interface
Use this procedure to configure 802.1x and EAP MD5 method for 802.1x through the web interface.
• Disable FIPS Mode .
You cannot enable EAP MD5 if FIPS Mode is enabled. If you try to do it, the phone shows the following warning message: EAP MD5 requires FIPS mode to be disabled .
• Enable Allow Legacy Encryption .
You cannot enable EAP MD5 if Allow Legacy Encryption is disabled. If you try to do it, the phone shows the following warning message: EAP MD5 requires Allow Legacy Encryption to be enabled .
Log in as the administrator.
Choose the Network tab.
In the 802.1x
section, enable Enable 802.1x
.
In the Username field, enter the user name.
To activate EAP MD5 method for 802.1x, enable EAP MD5 Enable .
The EAP MD5 section becomes visible.
In the Password field, enter the password for EAP MD5.
Click Save .
The phone reboots to apply the changes.
Related tasks
Configuring Legacy encryption mode through the web interface
on page 82
Standard encryption for media encryption with SRTP
When the key exchange for media encryption with SRTP occurs, Konftel 800 supports the AES_256_CM_HMAC_SHA1_80 mandatory crypto.
Some servers do not support this mandatory crypto. In this case you must enable the Allow Legacy Encryption option to make an SRTP call. By default, it is disabled.
80
