- No category
advertisement
Firmware User
’s Manual V5.11.17
HTTPS
HTTPS is to create a secure channel over an insecure network. There are two methods to create,
Certificate Signing Request (CSR) and Self-Signed Certificate.
Certificate Signing Request (CSR)
: User uses a signed certificate issued by trusted
Certification Authority (CA).
Self-Signed Certificate
: User wants to use the certificate created and issued by user himself.
Press
“Create” or “Create Self-Signed Certificate” button and configure settings in the pop-up screen to install the certificate.
Note that the new setting will only take effect after
“Save & Reboot”.
IEEE 802.1X
Please enable IEEE 802.1x and configure settings in the screen below. Note that the new setting will only take effect after
“Save & Reboot”.
29 www.acti.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 5 Connect to device and setup IP
- 7 Sample screenshots to setup IP of your PC (Win XP)
- 11 Login
- 12 Live view
- 14 PTZ Control Panel
- 15 How to Use Pan/Tilt (for PTZ models only)
- 15 How to Zoom the Camera In or Out
- 16 How to Set the Home Position
- 16 (for PTZ models only)
- 16 How to Set Serial Hex Command Protocol
- 16 How to Adjust the Focus
- 17 How to Set Touring Preset Points
- 17 How to Set and Enable Tours
- 19 Setup Menu
- 21 Date & Time
- 23 Network Section
- 23 IP Address Filtering
- 25 Port Mapping
- 28 Bonjour
- 29 HTTPS
- 29 IEEE 802.1X
- 30 SNMP Setting
- 32 Speed & Duplex
- 33 IP Settings
- 33 Connection Type
- 36 Video & Audio
- 36 Stream Mode
- 39 Camera Options
- 43 Compression
- 47 Motion Detection
- 52 Image
- 56 Exposure / White balance
- 59 Audio
- 60 OSD/Privacy Mask
- 62 Event
- 62 Event Server
- 66 Event Configuration
- 74 Event List
- 77 Manual Event
- 78 Local Storage Management
- 79 Status
- 80 Utilities
- 85 Setup
- 86 File Management
- 91 Event Handler with Local Storage
- 97 System
- 97 User Account
- 98 System Info
- 99 Factory Default
- 100 Firmware Upload
- 101 Save & Reboot
- 101 Logout