e_kb462.book Page 56 Friday, January 11, 2008 12:03 PM
4, 5
1, 2
3
4
Available in c
Reducing Camera Shake and Blurring When
Taking Pictures (Digital SR Mode)
c (Digital SR mode) allows you to set the sensitivity higher than other modes to reduce camera shake and blurring. Use this mode under the shooting conditions that camera shake or blurring tends to occur.
1
Press the four-way controller ( 3 ) in A mode.
The Capture Mode Palette appears.
2
Use the four-way controller ( 2345 ) to select c
(Digital SR).
3
Press the 4 button.
The shooting mode is selected and the camera returns to capture status.
4
Press the shutter release button halfway.
The focus frame on the LCD monitor turns green if the subject is in focus.
5
Press the shutter release button fully.
The picture is taken.
When shooting mode is set to c , the sensitivity is automatically adjusted between ISO 100-1600. (p.72) Shutter speed and aperture are set automatically according to the selected sensitivity.
56
