advertisement
![Introduction. Wen 33075T | Manualzz Introduction. Wen 33075T | Manualzz](http://s3.manualzz.com/store/data/061221487_1-839c486bb9ff1e73454c8fd3b29f717f-360x466.png)
INTRODUCTION
Thanks for purchasing the WEN Benchtop Mill. We know you are excited to put your tool to work, but first, please take a moment to read through the manual. Safe operation of this tool requires that you read and understand this operator’s manual and all the labels affixed to the tool. This manual provides information regarding potential safety concerns, as well as helpful assembly and operating instructions for your tool.
SAFETY ALERT SYMBOL: Indicates danger, warning, or caution. The safety symbols and the explanations with them deserve your careful attention and understanding. Always follow the safety precautions to reduce the risk of fire, electric shock or personal injury. However, please note that these instructions and warnings are not substitutes for proper accident prevention measures.
NOTE: The following safety information is not meant to cover all possible conditions and situations that may occur.
WEN reserves the right to change this product and specifications at any time without prior notice.
At WEN, we are continuously improving our products. If you find that your tool does not exactly match this manual, please visit wenproducts.com
for the most up-to-date manual or contact our customer service at 1-800-232-1195 .
Keep this manual available to all users during the entire life of the tool and review it frequently to maximize safety for both yourself and others.
SPECIFICATIONS
Model Number
Motor
Maximum Drilling Capacity
End Mill Capacity
33075, 33075T
120V, 60Hz, 11A
0.75" (20 mm)
0.625" (16 mm)
Face Mill Capacity
Swing
2" (50 mm)
16" (406 mm)
Maximum Distance Spindle to Table 12.375" (314 mm)
Spindle Taper R8
Spindle Speed
Table Dimensions
T-slot Size
Table Longitudinal Travel (X)
Cross Travel (Y)
Headstock Travel (Z)
Assembled Dimensions
Foot Print
100 to 2000 RPM
27.6" x 6.3"
0.5" (12 mm)
19.75" (502 mm)
6.5" (165 mm)
9.75" (248 mm)
24" x 35.5" x 33.5"
19.75" x 9.125"
3
advertisement
Related manuals
advertisement
Table of contents
- 3 Introduction
- 3 Specifications
- 4 General Safety Rules
- 6 Specific Rules for the Milling Machine
- 7 Electrical Information
- 8 Unpacking & Packing List
- 9 Know Your Milling Machine
- 11 Assembly & Adjustment
- 16 Operation
- 18 Maintenance
- 20 Troubleshooting Guide
- 22 Exploded View & Parts List
- 33 Warranty Statement