e_kb446.book Page 73 Friday, July 27, 2007 10:34 AM
R e c . M o d e 1 / 3
2, 3, 4
5
MENU
8 M Recorded Pixels
Q u a l i t y L e v e l
AWB W h i t e B a l a n c e
A F M o d e
ISO
AUTO
S e n s i t i v i t y
MENU
1, 6
Available in b R A q < I i \ Q E Y
Setting the Sensitivity
You can select the sensitivity to suit the brightness of the surroundings.
Sensitivity
Auto
Sensitivity is automatically adjusted between ISO 80 – 400. (In Digital SR mode, it is automatically adjusted within the range of ISO 80 – 1000.)
80
160
320
400
800
1000
• The lower the sensitivity, the less noise that affects the image.
The shutter speed will be slower in low light conditions.
• Higher sensitivity settings use faster shutter speeds in low light conditions to reduce camera shake, but the image may be affected by noise.
1
Press the 3 button in A mode.
The [ A Rec. Mode] menu appears.
2
Use the four-way controller ( 23 ) to select [Sensitivity].
3
Press the four-way controller ( 5 ).
R e c . M o d e 1 / 3
A pull-down menu appears.
4
Use the four-way controller ( 23 ) to change the sensitivity.
5
Press the 4 button.
8 M
AWB
ISO
AUTO
Recorded Pixels
Q u a l i t y L e v e l
W h i t e B a l a n c e
A F M o d e
S e n s i t i v i t y
A u t o
8 0
1 6 0
3 2 0
4 0 0
8 0 0
1 0 0 0
OK O K The Sensitivity setting is saved.
6
Press the 3 button.
MENU C a n c e l
The camera returns to capture status with the current setting.
• In c mode, the sensitivity is fixed to Auto (ISO 80– 1000).
• In mode, the sensitivity is fixed to ISO 200.
4
Saving the Sensitivity 1 p.85
73
