advertisement
General Installation Recommendations
Front Fan removal / replacement
Note: Areas of interest are marked in this section with circles and arrows in RED color. Please disconnect ALL cables from the computer unit before proceeding!
1: Remove cabinet cover (see beginning of this chapter)
When cabinet cover is off, unscrew 4 screws from the fan/filter cover in front of the unit. Turn anti-clockwise using a Pozidriv #2 screwdriver.
2: Gently pull out the fan/filter cover.
3: Unscrew 1 screw on top that keeps the Air Filter
Bracket in place. Turn anti-clockwise using a Pozidriv
#2 screwdriver.
4: Gently pull up the Air Filter Bracket.
5: Unscrew 4 screws that keeps the fan in place.
Turn anti-clockwise using a Pozidriv #2 screwdriver.
6: Lift/slide the fan up from the unit.
IND100210-2
Repeat the procedure backwards to finalize operation.
Installation 24
INB100042-3 (Rev 3)
advertisement
Related manuals
advertisement
Table of contents
- 3 Contents
- 5 Contents of package
- 7 General
- 8 About this manual
- 8 About Hatteland Display
- 8 hatteland-display.com
- 8 Contact Information
- 9 Computers introduction
- 10 Basic Construction
- 11 Product Labels (Examples)
- 11 Serial Number Label Placement (external)
- 12 Operating System Serial Number Label Placement (internal)
- 13 Installation
- 14 Installation and mounting of computers
- 14 Cables
- 15 Computer Upgrade Precaution Note
- 16 Ferrites
- 17 Cabinet cover removal
- 18 PCI Card removal / replacement - Introduction
- 18 PCI Card removal / replacement - Full Lenght & Full Height
- 19 PCI Card removal / replacement - Half Lenght & Full Height
- 19 PCI Card removal / replacement - Half Lenght & Half Height
- 20 Hard Drive (HDD) removal / replacement
- 21 DVD/CD Drive removal / replacement
- 22 Air Filter removal / replacement - Alternative
- 24 Front Fan removal / replacement
- 25 Mounting Brackets for Console Mounting
- 26 19 inch Rack Kit 4U
- 26 Sliding Rails
- 27 Physical Connections
- 33 Technical Drawings
- 34 Technical Drawings - HM C
- 35 Technical Drawings - Accessories
- 36 Technical Drawings - 19” Rack Kit 4U
- 38 Technical Drawings - Mounting Brackets
- 39 Appendixes
- 40 Pin Assignments - Common Connectors
- 42 Trouble-shooting
- 43 Declaration of Conformity
- 44 Return Of Goods Information
- 45 Terms
- 48 Revision History