Changing item names. Shimadzu GC-2014

6 Basic Key Operation

6.3 Basic Key Operations

6.3.5

Changing item names

Customize file names and other names with alphanumeric characters and symbols. Change the name using the following procedure:

(1) Move the cursor to an item to be changed using the [ △ ] and [ ▽ ] keys.

(2) Move the cursor to a character to be changed using the [ 　 ] and [ 　 ] keys.

(3) Input a character as described in the following section on entering characters. The character input procedure described below.

(4) Press the [ENTER] key to validate the input.

(5) Repeat steps (2) to (4) to enter a name.

(6) Press the [CE] key to delete one character at the cursor’s current position.

Fig. 6.3.5

GC-2014 75

6 Basic Key Operation

6.3 Basic Key Operations

Q

Entering characters

Initially, the character input screen is in the upper case mode. Press [LowerChr] (PF menu) to select the lower case mode. Press [NumerChr] (PF menu) to select the numeric mode.

Alphabetic mode (upper case/lower case)

8

9

0

6

7

Key

1

2

3

4

5

．

－

Toggled characters

A/a → B/b → C/c → A/a → ・ ・ ・

D/d → E/e → F/f → F/f → ・ ・ ・

G/g → H/h → I/i → G/g → ・ ・ ・

J/j → K/k → L/l → J/j → ・ ・ ・

M/m → N/n → O/o → M/m → ・ ・ ・

P/p → Q/q → R/r → P/p → ・ ・ ・

S/s → T/t → U/u → S/s → ・ ・ ・

V/v → W/w → X/x → V/v → ・ ・ ・

Y/y → Z/z → Y/y → ・ ・ ・

0 → 1 → 2 → 3 → 4 → 5 → 6 → 7 → 8 → 9 → 0 → ・ ・ ・

(blank) → ． → ， → ＋ → － → ＊ → ／ → ＃ → ＄ → ％ → ＆ → (blank) → ・ ・ ・

＆ → ％ → ＄ → ＃ → ／ → ＊ → － → ＋ → ， → ． → (blank) → ＆ → ・ ・ ・

Numeric mode

Press the [0] to [9] keys to input numbers “0” to “9”.

Press the [-] and [ ・ ] keys to toggle the symbols.

76 GC-2014