INTERACTIVE CONTROL CONSOLE. Oceanic VT 3

Below you will find brief information for VT3 Dive Computer. The Oceanic VT3 is a versatile dive computer offering NORM (air/nitrox), GAUG (digital gauge), and FREE dive modes. It features air time remaining, ascent rate indicators, audible alarms, and a PC interface. It supports multiple transmitters for tank pressure monitoring and Nitrox diving with adjustable FO2 settings. The VT3 provides comprehensive dive data, including depth, time, and decompression information.

PDF

Document

Key features

NORM, GAUG, and FREE Dive Modes
Audible and LED Alarms for critical warnings
Air Time Remaining (ATR) calculations
Tissue Loading Bar Graph (TLBG) for decompression status
SmartGlo Backlight for enhanced visibility
PC Interface for data logging and settings management
Nitrox compatibility with adjustable FO2 settings
Multiple transmitter support

Frequently asked questions

VT3 features 3 Operating Modes which include NORM (Normal Air/Nitrox Dive Computer), GAUG (Digital Gauge Mode), and FREE (Free Dive Mode).

To activate the SmartGlo Backlight - press momentarily the S button (less than 2 seconds). If the button is depressed for more than 10 seconds the Backlight will turn Off. The Backlight does not operate during a Low VT3 Battery Condition or when the VT3 is connected to a PC.

The VT3 features a Tissue Loading Bar Graph (TLBG) that represents your relative no decompression or decompression status. As Depth and Dive Time increase, segments will add to the TLBG, and as you ascend to shallower depths, the segments of the TLBG will begin to recede, indicating that additional no decompression time is allowed.