CONNECTING THE PTO. Jacto CONDOR BX-12

Jacto CONDOR BX-12 is a versatile and efficient sprayer designed to meet the demands of modern agriculture. With its advanced features and robust construction, the CONDOR BX-12 empowers farmers to achieve precise and effective chemical applications, maximizing crop yields and minimizing environmental impact.

CONNECTING THE SPRAYER

- Remove or set aside the tractor drawbar.

drawbar

- Mount the sprayer to the tractor threepoint suspension and level it as shown in the figure beside.

h h

- Adjust the tractor hydraulic lift lever so that the sprayer is not raised too high.

height adjustment

- Adjust the PTO shaft. If necessary, cut the male and female bars so that, after connecting the sprayer, it has the overlaps recommended in the figure beside.

± 5 cm ± 5 cm

NOTE: Align the forks as shown by "A".

ATTENTION

Before cutting the bars, check for all possibilities of movement of the sprayer on the lifting arms and third point.

Make sure the hitch pins locks are correctly installed.

For instructions in detail, please refer to the section MAINTENANCE - PTO

SHAFT.