advertisement
![Symbols and conventions. Metrohm 850 Professional IC Anion, 2.850.2230 | Manualzz Symbols and conventions. Metrohm 850 Professional IC Anion, 2.850.2230 | Manualzz](http://s2.manualzz.com/store/data/062107281_1-32f77e3ea17f5a9543368f9376584d25-360x466.png)
1.3 About the documentation
■■■■■■■■■■■■■■■■■■■■■■
1.3 About the documentation
CAUTION
Please read through this documentation carefully before putting the instrument into operation. The documentation contains information and warnings which have to be followed by the user in order to ensure safe operation of the instrument.
1.3.1 Symbols and conventions
The following symbols and styles are used in this documentation:
Cross-reference to figure legend
The first number refers to the figure number, the second to the instrument part in the figure.
Instruction step
Carry out these steps in the sequence shown.
Warning
This symbol draws attention to a possible life hazard or risk of injury.
Warning
This symbol draws attention to a possible hazard due to electrical current.
Warning
This symbol draws attention to a possible hazard due to heat or hot instrument parts.
Warning
This symbol draws attention to a possible biological hazard.
Caution
This symbol draws attention to a possible damage of instruments or instrument parts.
Note
This symbol marks additional information and tips.
4 ■■■■■■■■
850 Professional IC–Anion – MSM-HC – MCS – LP Gradient
advertisement
Related manuals
advertisement
Table of contents
- 14 Symbols and conventions
- 15 General notes on safety
- 15 Electrical safety
- 16 Tubing and capillary connections
- 16 Flammable solvents and chemicals
- 16 Recycling and disposal
- 30 Packaging
- 30 Checks
- 30 Location
- 32 Rollers and handle
- 35 Positioning and connecting the detector
- 37 Transport locking screws
- 37 Leak sensor
- 38 Drainage tubing
- 43 Connecting eluent bottle
- 52 Capillary connections high pressure pump/purge valve
- 53 Connecting low pressure gradient
- 54 Deaerating the high pressure pump
- 60 Connecting the injection valve
- 61 Mode of operation of the injection valve
- 62 Selecting the sample loop
- 65 General information on the MSM-HC
- 65 Connecting the MSM-HC
- 68 Principle of the peristaltic pump
- 69 Installing the peristaltic pump
- 73 General information on the MCS
- 73 Connecting MCS
- 74 Installing the adsorption cartridges
- 79 Connecting the instrument to the PC
- 79 Connecting the instrument to mains supply
- 87 Maintenance by Metrohm Service
- 88 Operation
- 88 Shutting down
- 88 Operation
- 89 Production
- 90 Operation
- 90 Protection
- 91 Maintenance
- 105 Operation
- 105 Protection
- 105 Operation
- 106 Maintenance
- 111 Operation
- 112 Maintenance
- 114 adsorption cartridge
- 114 O adsorption cartridge
- 115 Maintenance
- 115 Separating efficiency
- 116 Protection
- 116 Storage
- 116 Regeneration