advertisement
Your Detector
EMERGENCY
EV
ROAD HAZARD
RH
RAILROAD
RR
Detection Alerts
Emergency Vehicle Alerts
Emergency vehicle alerts are indicated by “EV” and the label “EMERGENCY.”
Road Hazard Alerts
Road Hazard alerts show “RH” and “ROAD HAZARD.”
Railroad Alerts
Railroad alerts generate “RR” and “RAILROAD.”
CAR VOLTAGE
LOW
Low Car Voltage Alert
The detector emits a car battery low alert when voltage drops below 11.9 volts. The detector enters SmartPower mode to avoid further battery draining.
The following screens are shown only if a Global Positioning System
Locator is connected to the system.
A detector system with a GPS Locator also provides alerts based on vehicle location and information in its databases. The icon increases in size as described. In Multi-Color theme, the icon also changes from green, to yellow, to red.
Photo Enforcement Alerts
An alert to a Photo Enforcement area is indicated by a camera surrounded by a circle. As you get closer to the photo enforced location (automated speed and red light cameras), the circle and the camera get progressively larger and you hear a unique chime. If the Voice Alert is activated you will also hear a voice alert.
32 English
Your Detector
Speed
55 mph
Detection Alerts
Caution Area Alerts
An alert to a Caution Area (such as speed traps and highaccident intersections) is indicated by an exclamation point surrounded by a circle. As you get closer to the progressively larger and you hear a unique chime. If the Voice Alert is activated, you will also hear a voice alert.
User Location Alerts
The system can store up to 1,000 User Programmable
Location Alerts set to give hazard warnings not known to the GPS Locator database. The screen displays a flag surrounded by a circle. When approaching a stored location, the circle and flag get progressively larger. In addition, a unique tone sounds as vehicle approaches location. A voice alert sounds if Voice Alert is activated.
User Alerts can be saved by pressing and holding the
MENU/SAVE button for 2 seconds.
NOTE: A particular User Location can be deleted only when the vehicle returns to that location and receives a User Location Alert. Press MENU/SAVE to delete that location.
A confirmation screen displays with “Yes” and
“No” selections. Press “Yes” to confirm User
Location Deleted. Press “No” to cancel delete.
All User Locations can be deleted at once in
Program Alert Settings.
Speed Alerts
Speed alerts are generated when the GPS Locator senses the vehicle is going faster than the speed setting programmed in the Alert Setting menu. The display indicates actual vehicle speed and a tone sounds.
All radar, laser, strobe and safety alerts have priority and override this alert.
Nothing Comes Close to a Cobra ® 33
Detection Alerts
Your Detector
IntelliScope
•
In conjunction with detection of a Location Based Alert, IntelliScope provides information about the direction of the Location relative to your moving vehicle.
The following descriptions use a Photo Enforced location as an example. In Caution
Areas and User Locations their signal icons and related text will substitute for the
Photo Enforced ones shown in these examples.
Three screens will sequence on the display to identify the type and direction of the location generating the alert. The continuous part of the sequence will repeat as long as the alert is active.
Screen Sequence In Zone 1 For Location Straight Ahead
As a location is approached, the arrows will point to the location while alternating with the alert icon and text as shown in the sequence below.
The sequence will repeat as long as the alert is active.
Begin Alert
Continuous Alert
Radar and Laser
Your Detector
IntelliScope Alert Arrow Sequence When You Turn Toward The Location
While approaching a Photo Enforcement Location involving a turn onto a cross street where it is located.
Zone 1 Zone 2 Zone 3
Vehicle
Turns
Right
NOTE The arrow disappears in Zone 3 when you are close to the Location.
IntelliScope Alert Arrow Sequence When A Location Is Off Your Route
While approaching and passing a Photo Enforcement Location that is some distance away to the right of your route.
Zone 1 Zone 2
NOTE The signal never enters Zone 3 since you never come close to the Location.
IntelliScope Alert Arrow Sequence For A Location Directly Ahead
While approaching a Photo Enforcement Location on your route that is directly ahead.
Zone 1 Zone 2 Zone 3
34 English
NOTE The arrow disappears in Zone 3 when you are close to the Location.
Nothing Comes Close to a Cobra ® 35
advertisement