Turning The Monitor TV On And Off. Harsper O5XHP-400, O5XHP-500

Basic Operation

Turning The Monitor TV On And Off

Press the Power button on the remote control. The PDP will turn on and you will be ready to use it's features.

You can also use the Power button on the front of the PDP.

• If your Monitor isn't turned on when the power button is pressed: Press the MODE button to check if the Monitor mode has been chosen

TV Channel Selection

1

Make sure if the signal source is TV.

2

Use CH+, CH- button or numeric button to change TV program for your channel selection.

3

You can watch the previous channel by pressing PREV.CH. Button on Remote Control.

Volume Control

Use VOL+ / VOL- button

Press MUTE button on Remote Control.

helios Plasma TV 31