144 Tools
1. Open the Notifications panel and swipe to the left on the QSlide apps bar (if necessary), then tap the Edit icon .
Drag one of the icon handles at the right side of the screen to move its icon to another position in the QSlide apps bar.
Checkmark the icons you want to display and remove the checkmark for the ones you want to remove.
2. Tap the Back Key (in the Touch Keys bar) to return to the
Notifications panel.
QuickRemote
QuickRemote turns your phone into a Universal Remote for your home TV, set top box, and audio system. You can set up and display up to four remotes.
NOTE QuickRemote may not be available for some devices.
To open the QuickRemote app and set up your QuickRemote
1. From the Home screen, tap the Apps icon (in the QuickTap bar) > the
Apps tab (if necessary) > QuickRemote .
2. Tap the room displayed at the upper-left corner of the screen to select its location.
Choose from Livingroom , Bedroom , Kitchen , Den , and Office .
Tools 145
3. Tap the Add icon (at the top right of the screen).
4. Tap the device you want to set for the remote, then tap the name of the device’s manufacturer.
Use the letters along the right side of the screen to jump directly to that letter in the list.
5. Continue your remote set up by following the on-screen instructions to configure the device.
NOTE It's important to point the IR sensor on your phone directly at the device you are configuring.
Set up from the Notifications panel
You can also perform the initial set up of your QuickRemote from the
Notifications panel. Swipe the Status Bar downward, tap the QuickRemote icon (in the Quick Settings bar, if necessary), tap ADD REMOTE in the dialog box, then continue set up as necessary.
After initial setup, to set up additional devices from the Notifications panel, tap the Full-screen icon (at the lower-right corner of the remote display), then tap the Add icon (at the top right of the QuickRemote screen).
Using QuickRemote
1. Swipe the Status Bar downward, then tap the QuickRemote icon (in the Quick Settings bar, if necessary) to open a QuickRemote bar with all of the remotes you set up.
2. Select the remote you want by tapping the remote name at the top of the QuickRemote bar.
3. Tap the buttons on the displayed remote.
NOTES • Tap the full-screen icon (at the lower-right corner of the remote display) to view the
QuickRemote in full screen.
• When adding a remote control for a TV, QuickRemote could use the INPUT button to configure the appropriate remote control. When configuring the INPUT button, the input source for the TV could be changed. To reset the input source of your TV, tap the
INPUT button on the QuickRemote several times (depending on the number of devices connected to the TV).
146 Tools
QuickRemote options
You can edit your QuickRemote bar by tapping the Edit icon (at the top right of the QuickRemote bar. Drag a remote handle to move it to another position on the bar.
To access the QuickRemote Options menu, tap the Menu icon (at the upper-right corner of the screen) to select Magic Remote setting , Edit remote name , Learn remote , Move remote , Delete remote , Settings , and
Help . Tap the Back Key (in the Touch Keys bar) to exit the Options menu.
Customizable remote
You can create your own personalized universal remote and choose where to place all of the buttons.
1. From the Home screen tap the Apps icon (in the QuickTap bar) > the
Apps tab (if necessary) > QuickRemote .
2. Tap the Add icon (at the top right of the screen) > Customizable remote .
3. Enter the Remote name, then tap OK .
4. Swipe to the left and right and place the buttons you want on the remote in the desired locations, then tap Next (at the bottom of the screen).
5. Program your customized remote using your original remote.
Face the IR sensors toward each other, about 4 inches apart.
Tap the button (on your customized remote) to learned.
