10.2 Adjusting the machine. Wacker Neuson BH 24 Low Vib RS, BH24, BH 24 Low Vib, BH 65, BH23, BH 23, BH 24, BH 23 SJT
Add to My manuals68 Pages
advertisement
10.2
Adjusting the machine
Machine with integrated shut-off device – RS (optional)
10 Use and operation
Item Designation
1 Shorting plug
2 Shorting plug
Item Designation
3 Handle
The machine only works when either the plug of the remote cut-off or the shorting plug is plugged in at the connection socket of the integrated shut-off device.
Operation with remote cut-off
If you wish to operate the machine via an external remote cut-off:
1. Remove the shorting plug from the connection socket.
2. Plug the shorting plug into the handle opposite so that it does not get lost.
The machine is now ready for operation with the remote cut-off. For further information, see the remote cut-off operator's manual.
Operation without remote cut-off
If you wish to operate the machine without an external remote cut-off:
1. Remove the shorting plug from the handle opposite.
2. Plug the shorting plug into the connection socket.
The machine is now ready for operation with the remote cut-off.
31
advertisement
Related manuals
advertisement
Table of contents
- 6 2.1 Means of representation for this operator's manual
- 7 2.2 Wacker Neuson representative
- 7 2.3 Described machine types
- 8 2.4 Identification of the machine
- 9 3.1 Principle
- 12 3.2 Qualification of the operating personnel
- 13 3.3 Protective gear
- 14 3.4 Transport
- 15 3.5 Operating safety
- 17 3.6 Safety during the operation of hand machines
- 17 3.7 Safety during the operation of combustion engines
- 19 3.8 Maintenance
- 21 3.9 Safety devices
- 25 6.1 Application
- 25 6.2 Functional description
- 30 10.1 Prior to starting the machine
- 31 10.2 Adjusting the machine
- 32 10.3 Changing tools
- 33 10.4 Starting up
- 34 10.4.1 Starting the engine
- 37 10.5 Operating the machine
- 38 10.6 Decommissioning
- 39 11.1 Maintaining the emission control system
- 39 11.2 Maintenance personnel qualifications
- 40 11.3 Maintenance schedule
- 40 11.4 Maintenance work
- 40 11.4.1 Cleaning machine
- 41 11.4.2 Topping up with fuel
- 43 11.4.3 Checking/cleaning air cleaner
- 44 11.4.4 Lubricating the machine
- 45 11.4.5 Checking/cleaning/replacing spark plug
- 46 11.4.6 Checking the tool holder for wear
- 49 14.1 Truck
- 51 15.1 BH
- 53 15.2 BH
- 56 15.3 BH
- 58 16.1 Emission control system background information
- 59 16.2 Limited defect warranty for Wacker Neuson emission control systems
- 63 17.1 Use of oxygenated fuels