Activating. Alert J5

Activating

ALERT J5 is shipped deactivated after it is calibrated and passes inspection at the factory. This allows the device to be stored without losing any time from the calibration period. You have to activate the device to start using it. Once activated, the date for the next calibration increments by 365 days from the date of activation.

A Not Activated message when you initially power on the device indicates that it is not activated and no test can be performed until it is activated.

NOTE: This feature is displayed on the Main Menu, only if your ALERT J5 has been previously calibrated. It is not possible for you to deactivate the device.

To activate:

1. From the Not Activated screen, press the left button to activate it. The date the device was deactivated is shown.

2. Press the right button to activate the device. The calibration due date is now 365 days from the current date.

Battery

The ALERT J5 requires two AA Alkaline batteries to operate. To insert, remove the battery compartment rear cover (press the tab to release).

p. 4/13 ALERT TM J5 INSTRUCTION MANUAL p. 5/13