advertisement
▼
Scroll to page 2
of
16
6 Handling
You can control the KVM by using the switches at the front or by using Hotkeys.
6.1 Toggle by switches
Below is shown the KS-3108. The use of the other KVM is accordingly. Please look also at chapter 3.3.
The switches at the front of the device are control buttons as well as LED indicators.
You can switch between the computers by pushing the buttons. The right LEDs show the selected port. The left LEDs show the online status of these ports.
Manual Rackmount KVM RJ45 Series 11 of 16
06.08.2019
advertisement
Related manuals
advertisement
Table of contents
- 3 Basic information
- 3 Introduction
- 3 Scope of delivery
- 3 General information
- 4 Safety
- 4 Intended use
- 4 Environmental
- 4 Disposal
- 4 General information
- 4 Danger and protection
- 5 Product information
- 5 Hardware requirements
- 5 Features
- 6 Front view
- 7 Rear view
- 8 Dongle
- 9 Mounting into a Rack
- 9 Installation and implementing
- 9 Direct connection
- 9 Cascading
- 10 Operating
- 11 Handling
- 11 Toggle by switches
- 12 Toggle by hotkeys
- 14 Maintenance
- 14 Disposal
- 14 Warranty terms
- 15 Contact