4.3.4.4. Phone Book. Fanvil BW320

Field name

End with "#"

Fixed Length

Time out

Digital Map Configuration explanation

Set Enable/Disable the phone ended with “#” dial.

Specify the Fixed Length of phone ending with.

Set the timeout of the last dial digit. The call will be sent after timeout.

Below is user-defined digital map rule:

[] Specifies a range that will match digit. May be a range, a list of ranges separated by commas, or a list of digits. x Match any single digit that is dialed.

. Match any arbitrary number of digits including none.

Tn Indicates an additional time out period before digits are sent of n seconds in length. n is mandatory and can have a value of 0 to 9 seconds. Tn must be the last 2 characters of a dial plan. If Tn is not specified it is assumed to be T0 by default on all dial plans.

[1-8]xxx: Cause extensions 1000-8999 to be dialed immediately

9xxxxxxx: Cause 8 digit numbers started with 9 to be dialed immediately

911: Cause 911 to be dialed immediately after it is entered.

99T4: Cause 99 to be dialed after 4 seconds.

9911x.T4:Cause any number started with 9911 to be dialed 4 seconds after dialing ceases.

Notice: End with “#”, Fixed Length, Time out and Digital Map Table can be used simultaneously, System will stop dialing and send number according to your set rules.

4.3.4.4. Phone Book

You can input the name, phone number and select ring type for each name here.

39