Export Diagnostic Information. Beijer Electronics X2 control
Add to My manuals20 Pages
Beijer Electronics X2 control is an advanced industrial computer with a rich set of features, designed for a wide range of applications in various industries. It has enhanced graphics performance, allowing for smooth and visually appealing HMI screens. The X2 control operates on Windows Embedded Compact 2013, ensuring compatibility with a vast array of automation protocols and software applications. The device excels in connectivity, featuring dual Ethernet ports, enabling seamless integration into industrial networks.
advertisement
![Export Diagnostic Information. Beijer Electronics X2 control | Manualzz Export Diagnostic Information. Beijer Electronics X2 control | Manualzz](http://s2.manualzz.com/store/data/065689426_1-faa5ba1ace8d221b20ae356f9a67b9c2-360x466.png)
Service Menu
Category
Selftest cont.
Summary of flash drive storage
Network adapters
Description
Shows the result of the last self test.
Shows a summary of the flash drive storage status.
Shows IP configurations and MAC addresses for the network adapters in the operator panel.
Note:
The information (layout and number of screens) on the diagnostic screen pages appear differently depending on screen size. The screenshots above are taken from a X2 base
15 v2 HP operator panel.
3.9.1
Export Diagnostic Information
Click Save to USB memory to export the diagnostic information to an external
USB flash drive or other USB connected storage device. Make sure that the storage device is connected before trying this option.
Beijer Electronics, MAEN352 13
advertisement
Related manuals
advertisement
Table of contents
- 4 1 Introduction
- 4 Safety Precautions
- 4 Warning, Caution, Information, and Tip Icons
- 4 Trademarks
- 5 References
- 6 Operating Systems
- 7 2 Boot
- 7 Welcome Screen
- 8 3 Service Menu
- 8 Service Menu in an Empty Panel
- 8 Service Menu in a Panel containing a Project
- 8 IP Settings
- 9 Date / Time
- 9 Edit Project
- 9 Copy Project from External Memory
- 9 Copy Project to SD Card
- 10 Copy Project to USB
- 10 Delete Project
- 10 Restore Panel to Previous Image
- 10 Restore Panel to Factory Image
- 10 Self Test
- 11 Touch Calibrate
- 11 Debug Logging
- 12 Diagnostic
- 13 Export Diagnostic Information
- 14 4 Image Update
- 14 Updating the Panel Image using USB or SD-Card
- 14 Preferred Way
- 15 Image + New iX Developer Project
- 15 Updating the Panel Image over Ethernet
- 18 iX Developer Project Status after Panel Image Update
- 19 5 Creating a custom Welcome Screen