- Vehicles & accessories
- Motor vehicle accessories & components
- Engine
- S&S Cycle
- V-Series
- Owner's manual
Engine Specifications. S&S Cycle V-Series
Add to My manuals20 Pages
S&S Cycle V-Series is an air-cooled, v-twin engine designed to offer Proven Performance® and reliability. It is taller than a stock engine, so the installer must check for adequate clearance between the engine and all chassis components, including the frame and fuel tanks. An upgraded clutch is also recommended, as the S&S engine will produce more power than the stock engine it is replacing. S&S recommends synthetic engine oil such as S&S Premium Synthetic 20W50 or a premium petroleum-based engine oil such as S&S Heavy Duty 20W50 or 25W60.
advertisement
OWNERS MANUAL — S&S® V-SERIES ENGINES
ENGINE SPECIFICATIONS
The following chart contains information about a number of S&S engines covered by this owners manual.
Engine
V80
V96
V96 TÜV
V111
V113 TÜV
V124
V124 TÜV
Displacement Bore
80"
96"
96"
111"
113"
124"
124"
31⁄2"
35⁄8"
35⁄8"
41⁄8"
4"
41⁄8"
41⁄8"
Stroke
41/4"
45⁄8"
45⁄8"
41⁄8"
41⁄2"
45⁄8"
45⁄8"
CR
8.4:1
9.5:1
10.1:1
9.8:1
10.1:1
10.8:1
9.5:1
Cam
508
585
520
585
547
640
547
Tappets
Hydraulic
“Hydraulic w/HL2T”
“Hydraulic”
“Hydraulic w/HL2T”
“Hydraulic w/HL2T”
“Hydraulic w/HL2T”
“Hydraulic w/HL2T”
Fuel System Ignition
System
“Super E or
None”
“Super Stock or None”
Super E
Super E
Super E
“Super Stock or IST”
IST
“Super Stock or IST”
Super G IST
Super G or VFI “Super Stock,
IST, or VFI”
Super G IST
15
advertisement
Related manuals
advertisement
Table of contents
- 4 Engine Installation
- 4 Oil Line Hook up
- 4 Oil Recommendations
- 7 General Break-in Procedure
- 9 Tune Up Information
- 9 Super Stock & IST Ignition Systems
- 9 EFI Information
- 10 Starting Procedure
- 11 Super E & G Carburetor Tuning Guide
- 14 Engine Service Intervals
- 15 Engine Specifications
- 16 Engine Dimensions
- 18 Torque Specifications
- 19 Specifications and Wear Limits