5.3.2.1.2 Serial Port 2 Configuration. IEI Integration KINO-DAL

KINO-DAL SBC

5.3.2.1.2 Serial Port 2 Configuration

 Serial Port [Enabled]

Use the Serial Port option to enable or disable the serial port.



Disabled



Enabled D EFAULT

Disable the serial port

Enable the serial port

 Change Settings [IO=2F8h; IRQ=11]

Use the Change Settings option to change the serial port IO port address and interrupt address.



IO=2F8h; IRQ=11 D EFAULT



IO=3F8h;

IRQ=4, 10, 11



IO=2F8h;

IRQ=4, 10, 11



IO=3E8h;

IRQ=4, 10, 11



IO=2E8h;

IRQ=4, 10, 11

Serial Port I/O port address is 2F8h and the interrupt address is IRQ11

Serial Port I/O port address is 3F8h and the interrupt address is IRQ4, 10, 11

Serial Port I/O port address is 2F8h and the interrupt address is IRQ4, 10, 11

Serial Port I/O port address is 3E8h and the interrupt address is IRQ4, 10, 11

Serial Port I/O port address is 2E8h and the interrupt address is IRQ4, 10, 11

 Transfer Mode [RS232]

Use the Transfer Mode option to select the Serial Port 2 signaling mode.



RS422



RS232



RS485

D EFAULT

Serial Port 6 signaling mode is RS-422

Serial Port 6 signaling mode is RS-232

Serial Port 6 signaling mode is RS-485

Page 81