Removing AC Components. Carmanah R820-G, G Series, R829-G, SC315-G

AC TO SOLAR RETROFIT GUIDE

3.1 Removing AC Components

1. Access the inside of the power cabinet and switch the circuit breaker to the off position. Isolate the AC power at the source so it is no longer feeding the cabinet.

2. Remove the DC power and solar (spare DC power fuse) fuses from the DC input power terminal.

3. Remove the DC power wires (red and black) on the right side of the cabinet.

4. Remove the AC input wires from the terminal blocks (line, neutral, and ground). Cap them off to with wire nuts.

Carmanah Technologies Corp. | 250 Bay St, Victoria, BC V9A 3K5, Canada | 1.250.380.0052 | [email protected]

| carmanah.com

7