Mower unit. Amazone PH SMARTCUT

Rear wheels

• Rear wheel bearings (Fig. 10.6.1-5)

Maintenance

11.9.2 Mower unit

• Overload safety (every 150 operating hours only) (Fig. 10.6.2-1)

CAUTION

Excess grease can easily reach the lower protection plate on the belt drives and damage it (Fig. 10.6.2-2).

• Front wheel fork bearings (Fig. 10.6.2-3/1)

• Support bracket linkage (Fig. 10.6.2-3/2)

• Rear cage roller bearing (Fig. 10.6.2-3/3).

• Connecting arm bearing (Fig. 10.6.2-4 and Fig. 10.6.2-5)

PROFIHOPPER BAF0012.13 09.22

89

Maintenance

90 PROFIHOPPER BAF0012.13 09.22

Maintenance

• Mower unit drive shaft bearing (Fig. 10.6.2-6 and Fig. 10.6.2-7)

There are 2 lubrication nipples of the drive shaft bearings.

PROFIHOPPER BAF0012.13 09.22

91

Maintenance

92

• Longitudinal worm drive shaft bearings (Fig. 10.6.2-8)

• Longitudinal work drive cross-linkage (Fig. 10.6.2-9)

PROFIHOPPER BAF0012.13 09.22

Maintenance

• Transverse worm bearings (Fig. 10.6.2-10 + Fig. 10.6.2-11)

• Rotor bearings (Fig. 10.6.2-11 + Fig. 10.6.2-12) b (= transverse worm bearing) a (= rotor)

PROFIHOPPER BAF0012.13 09.22

93

Maintenance

• Height adjustment (Fig. 10.6.2-13)

94 PROFIHOPPER BAF0012.13 09.22