ET5X User Guide.book Page 4
3 - 4 ET5X User Guide
Table 3-1 DataWedge Demonstration Icons
Icon
Not applicable.
/
Description
Indicates that the data capture function is through the Expansion Back imager.
Toggles between normal scan mode and picklist mode when using the imager to capture bar code data.
Opens a menu to view the application information or to set the application DataWedge profile.
NOTE See the ET5X Integrator Guide for information on DataWedge configuration.
Press the Expansion Back Scan button or touch the yellow scan button to enable data capture. The captured data appears in the text field below the yellow button.
Camera
This section provides information for taking photos and recording videos using the integrated digital cameras.
NOTE The ET5X saves photos and videos on the internal storage.
Taking Photos
1.
2.
Touch > .
If in video mode, swipe in from left side of screen and touch .
ET5X User Guide.book Page 5
Applications 3 - 5
3.
4.
5.
6.
Figure 3-3 Camera Mode
Frame the subject on the screen.
To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear on the screen.
Touch an area on the screen to focus. The focus circle appears on the screen.
Touch .
The camera takes a photo and a shutter sound plays.
Alternately, touch and hold to focus first, before taking a photo; then release to take a focused photo.
Recording Videos
To record a video:
1.
2.
Touch > .
If in photo mode, swipe in from left side of screen and touch .
ET5X User Guide.book Page 6
3 - 6 ET5X User Guide
Figure 3-4 Video Mode
3.
4.
5.
6.
7.
Touch the options bar and touch .
Point the camera and frame the scene.
To zoom in or out, press two fingers on the display and pinch or expand fingers. The zoom controls appear on the screen.
Touch to start recording.
The device starts recording the video. The video time remaining appears in the top left of the screen.
Touch to end recording.
Camera Settings
To change camera settings:
1.
Swipe in from left.
2.
Touch .
ET5X User Guide.book Page 7
Figure 3-5 Camera Settings
Resolution & quality
• Camera
• Back camera photo
• (4:3) 8.0 megapixels
• (4:3) 4.9 megapixels
• (4:3) 3.1 megapixels
• (16:9) 6.0 megapixels
• (16:9) 2.1 megapixels
• (16:9) 0.9 megapixels
• Front camera photo
• (16:9) 2.1 megapixels
• (16:9) 0.9 megapixels
• (4:3) 1.2 megapixels
• (4:3) 0.3 megapixels
• (4:3) 0.1 megapixels
• Video
• Back camera video
• HD 1080p
• HD 720 p
• SD 480p
• Front camera video
• HD 1080p
• HD 720 p
Applications 3 - 7
ET5X User Guide.book Page 8
3 - 8 ET5X User Guide
• SD 480p
Save location
Touch to add location information to the photo (default – disabled).
Advanced
• Manual exposure (default - off).
Help & feedback
Not applicable.
Photo Settings
When in Photo mode, photo settings display on screen.
Rear Camera
Touch to display the photo setting options.
•
•
•
• – Touch to switch to the front camera.
• Flash mode - Touch to set whether Rear-facing Camera relies on its light meter to decide whether a flash is necessary, or to turn it on or off for all shots.
• Off - Disable flash.
Auto - Camera adjusts flash automatically depending upon light meter (default).
On - Enable flash upon taking a photo.
AE-Bracket - Touch to set Automatic Exposure Bracketing (default – disabled).
Countdown timer - Options: Off (default), 3 seconds or 10 seconds .
Exposure - Touch to adjust the exposure settings. Options: +2, +1, 0 (default), -1 or -2. Available when
Manual exposure is set in Advanced settings.
Front Camera
Touch to display the photo setting options.
•
•
•
• – Touch to switch to the rear camera.
AE-Bracket - Touch to set Automatic Exposure Bracketing (default – disabled).
Countdown timer - Options: Off (default), 3 seconds , or 10 seconds .
Exposure - Touch to adjust the exposure settings. Options: +2, +1, 0 (default), -1 or -2. Available when
Manual exposure is set in Advanced settings.
Video Settings
When in Video mode, video settings are displayed on screen.
ET5X User Guide.book Page 9
Applications 3 - 9
Rear Camera
Touch to display the photo setting options.
•
• – Touch to switch to the front camera.
• Flash mode - Touch to set whether Rear-facing Camera relies on its light meter to decide whether a flash is necessary, or to turn it on or off for all shots.
• Off - Disable flash.
Auto - Camera adjusts flash automatically depending upon light meter (default).
On - Enable flash upon taking a photo.
AE-Bracket - Touch to set Automatic Exposure Bracketing (default – disabled).
Front Camera
Touch to display the photo setting options.
•
• – Touch to switch to the rear camera.
AE-Bracket - Touch to set Automatic Exposure Bracketing (default – disabled).
