Setup. Yamaha C450, HT-C450

FUNCTION

TV SOURCE

POWER

DVD RECEIVER/TV SLEEP

1

4

7

2

5

8

0

3

6

9

DSP /EQ

Setup

Before Starting (Initial Setting)

1.

Press the POWER button when it is plugged in

TV for the fi rst time.

Initial Setting screen will be displayed.

Setting the Setup menu

menu. The GUI (Graphical User Interface) in this manual may differ, depending on the fi rmware version.

REPEAT

TUNING

/CH

1

Initial setting > On-Screen Language

Select a language for the on-screen displays.

English

Korean

Dutch

French

German

Italian

Move Select Return

2.

3.

4.

5.

Press the ▲▼ buttons to select the desired language, then press the ENTER button.

Press the ENTER button to select Start button.

Press the ▲▼ buttons to select desired TV Aspect, then press the ENTER button.

Press the ENTER button to select Start button.

✎

`

`

`

`

NOTE

If the HDMI cable is connected to the product, TV aspect does not appear.

If you want to move to the previous screen, press the

RETURN button.

Once you select a menu language, you can change it by pressing the STOP ( @ ) button on the remote control for more than 5 seconds with no disc inserted.

When the Initial Setting screen does not appear, refer to the Initial Setting. (see page 26)

3

2 RETURN EXIT

A A B B

MO/ST

C C D D

DIMMER S . VOL AUDIO UPSCALE

P .BASS

1 MENU BUTTON : Display the home menu.

4

2

3

RETURN BUTTON : Return to the previous setup menu.

ENTER / DIRECTION BUTTON

Move the cursor and select an item.

Select the currently selected item.

Confi rm the setting.

4 EXIT BUTTON : Exit the setup menu.

Settings

Function DVD/CD

Selecting the Video Format

Each country has a different video format standard.

You can select the video format either NTSC or PAL.

Press and hold the Number 7 button on the remote control for over 5 seconds while the product is urned off.

~

~

"NTSC" or "PAL" will appear on the display. At this time, press the Number 7 button to select either

"NTSC" or "PAL".

The video format of the disc must be the same as he video format of your TV.

1.

2.

3.

4.

5.

6.

Press the POWER button.

Press the _+ buttons to select Settings , then press the ENTER button.

Press the $% buttons to select the desired menu, then press the ENTER button.

Press the $% buttons to select the desired sub-menu, then press the ENTER button.

Press the $% buttons to select the desired item, then press the ENTER button.

Press the EXIT button to exit the setup menu.

English English