Irregular Hip/Valley. Calculated Industries 4050
Add to my manuals
44 Pages
The Calculated Industries 4050 is a versatile construction calculator that can assist you with various tasks, including area, volume, and weight calculations, roof framing, stair layout, and more. It features dedicated keys for common construction functions, allowing for quick and accurate calculations. Additionally, it offers the ability to convert between different units of measurement, making it suitable for projects using both metric and imperial units.
advertisement
DIVIDING DIMENSIONS
Divide 4700 mm into thirds (divide by 3):
KEYSTROKE
4700M*3=
DISPLAY
1566.667 MM
RECTANGULAR AREA AND VOLUME
Find the area and volume:
• Length: 6200 mm
• Width: 3500 mm
• Height: 450 mm
First, multiply the Length times the Width to find the Area. Then, multiply the Area times the Height to find the Volume:
KEYSTROKE DISPLAY
6200Mx
3500Mx
450M=
6200.
MM
21.7 SQ M
9.765 CU M
ENTERING SQUARE AND CUBIC AND
ADDING A WASTE ALLOWANCE
Add a 10% waste allowance to 5200 sq mm.
Then add a 20% waste allowance to
4500 cu mm:
KEYSTROKE DISPLAY
5200MM+10% 5720. SQ MM
4500MMM+20%
5400. CU MM
P ocket
R efeRence
G uide
— 14
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- - Basic Function Keys
- - Dimension Keys
- - Arc/Circle Keys
- - Right Triangle/Roof Framing Keys
- - Stair Layout Key
- - Stair Settings
- - Miscellaneous Functions
- - Paperless Tape Example
- - Preference Settings
- - Entering Dimensions
- - Entering Linear Dimensions
- 1 Entering Square/Cubic Dimensions
- 2 Basic Math Operations
- 2 Strings of Dimensions
- 3 Dividing Dimensions
- 3 Rectangular Area and Volume
- 3 Cubic and Adding A Waste Allowance
- 4 Linear Conversions
- 4 Weight Conversions
- 5 Weight Per Volume
- 6 Using the Memory
- 7 Baluster Spacing
- 8 Number of Studs
- 8 Circle Area and Circumference
- 9 Arc Angle or Degree
- 10 Concrete Volume for Driveway
- 10 Concrete Columns
- 11 Complex Concrete Volume
- 12 Right Angle / Framing
- 13 Squaring-Up a Foundation
- 13 Pitch — Converting Roof Angle
- 14 Converting Slope
- 14 Common Rafter Length
- 15 And Jack Rafters
- 16 Irregular Hip/Valley
- 16 Rake-Wall – No Base
- 17 Stairs
- 17 Stairs — Given Rise and Run
- 18 Stairs — Given Rise Only
- 23 Area and Volume Formulas
- 23 Area Formulas
- 23 Volume Formulas
- 4 Basic Function Keys
- 5 Dimension Keys
- 6 Arc/Circle Keys
- 6 Right Triangle/Roof Framing Keys
- 8 Stair Layout Key
- 9 Stair Settings
- 9 Miscellaneous Functions
- 11 Paperless Tape Example
- 12 Preference Settings
- 13 Entering Dimensions
- 13 Entering Linear Dimensions
- 14 Entering Square/Cubic Dimensions
- 15 Basic Math Operations
- 15 Strings of Dimensions
- 16 Dividing Dimensions
- 16 Rectangular Area and Volume
- 16 Cubic and Adding A Waste Allowance
- 17 Linear Conversions
- 17 Weight Conversions
- 18 Weight Per Volume
- 19 Using the Memory
- 20 Baluster Spacing
- 21 Number of Studs
- 21 Circle Area and Circumference
- 22 Arc Angle or Degree
- 23 Concrete Volume for Driveway
- 23 Concrete Columns
- 24 Complex Concrete Volume
- 25 Right Angle / Framing
- 26 Squaring-Up a Foundation
- 26 Pitch — Converting Roof Angle
- 27 Converting Slope
- 27 Common Rafter Length
- 28 And Jack Rafters
- 29 Irregular Hip/Valley
- 29 Rake-Wall – No Base
- 30 Stairs
- 30 Stairs — Given Rise and Run
- 31 Stairs — Given Rise Only
- 36 Area and Volume Formulas
- 36 Area Formulas
- 36 Volume Formulas