18

12. Begin wiring the fan by opening up the handy box. Take off the wire nuts within the handy box. Detach the green ground wire from the power cord. Remove the power cord.

Re-attach the ground screw and wire to the handy box. Cut your green ground wire in half and strip both sides. (see Figure E on page 17)

13. Feed the 2 wire Romex from your switch into the handy box. Tape the white wire on this end of the

Romex. Tie the blue & black wire together for high speed. Tie the red and taped white wire together for low speed.

14. Feed the 2 wire Romex from your timer into the handy box. Feed the 2 wire Romex from your power source into the handy box.

15. Tie the three remaining black wires together. Tie the three remaining white common wires together. Tie the three bare copper wires and the two green ground wires together.

16. Carefully reinstall the handy box cover.

4-3 Two Speed Wiring (for ES-6400)

1. For this installation, you will need (4) 2 wire Romex, an 8 Hour Timer, and a Double stack combination

Switch.

2. Using the 2-wire Romex from the first fan motor head, attach the black wire to the top gold screw on the right. Using the 2-wire Romex from the second fan motor head, attach the black wire to the bottom gold screw on the right. (see Figure F)

3. Attach the red wire from the 8 Hour Timer to the bottom black screw on the switch.

4. Using the 2 wire Romex from your power source, tie the black wire to the black wire on the timer with a wire nut.

5. Take a piece of bare copper wire and attach it to the green ground screw on the switch. Using a wire nut, tie all copper wires together with the green ground wire from the timer. Tie all the white wires together. Finish the installation of your switches and switch cover plate.

6. Open up the handy box on the first motorhead. Unscrew the green ground wire and detach the green ground wire from the power cord. Remove the power cord.

Reattch the green ground wire to the handy box. Cut your green ground wire in half and strip both sides.

Feed the 2-wire Romex from your switch into the handy box. Tie the blue & black wire together for high speed.

QUIETCOOLSYSTEMS.COM

Figure F

Off On

Figure G

Note: Wiring instructions continued on page 20.

1-888-QUIETCOOL 19

7. Feed the 2 wire Romex from your power source into the handy box. Tie the remaining black wires together. Tie the remaining white common wires together. Tie the bare copper wires and the two green ground wires together. (see Figure G on page 20)

8. Open up the handy box on the second motorhead. Unscrew the green ground wire and detach the green ground wire from the power cord. Remove the power cord.

Reattch the green ground wire to the handy box. Cut your green ground wire in half and strip both sides.

9. Feed the 2-wire Romex from your switch into the handy box. Tie the blue & black wire together for high speed.

10. Feed the 2 wire Romex from your power source into the handy box. Tie the remaining black wires together. Tie the remaining white common wires together. Tie the bare copper wires and the two green ground wires together. (see Figure G on page 20)

20 QUIETCOOLSYSTEMS.COM

1-888-QUIETCOOL 21

22 QUIETCOOLSYSTEMS.COM

10 YEAR LIMITED WARRANTY

QC ES (ENERGY SAVER) LINE WHOLE HOUSE FANS

QC Manufacturing Inc. extends this warranty to the original purchaser of the following QuietCool

Energy Saver Line Models --- QC ES-1500, QC ES-2250, QC ES-3100, QC ES-4700, QC ES-5400 and QC ES-6400 --- installed and used in a residence under normal conditions within the United

A. Ten year coverage applies to the QuietCool motor fan assembly. At our option we will repair or replace any part of the assembly should it fail to operate during the first ten years from the date of original purchase.

B. One year coverage for all other components including grilles, housings, controls, and accessories furnished by QC Manufacturing, Inc. At our option, we will repair or replace any part which fails as a results of defective material or workmanship during the first year from the original date of purchase.

C. This warranty does not cover any of the following:

1. Accidental or consequential damage resulting from the operation of our equipment

or any malfunction thereof.

2. Cost of service calls to diagnose the cause of problems or the labor charge to

un-install any components.

3. Product failure or damage due to faulty installtion, abuse, misuse, unauthorized

alteration to factory specs, lack of maitenance, or transportation damage.

4. Shipping or postage for warranty claims.

D. To obtain service under this warranty, first contact the dealer where you purchased the equipment. If you are unable to find or reach your dealer, contact Customer

Service at QC Manufacturing, Inc. In order to process a warranty claim, you must have your serial number as well as your proof of purchase. QC Manufacturing, Inc. will not process a warranty claim without a serial number. Your serial number is located on the fan motorhead as well as on the back of this Owner’s Guide.

This warranty is the only warranty extended by QC Manufacturing, Inc. to purchasers or suppliers of our equipment. QC Manufacturing, inc. disclaims all other warranties, express or implied, that arise by operation of the law. Where consumer may have additional warranty rights in accordance with federal and state law, such rights shall superseed those stated herein.

Rev. 10/20/16

QC Manufacturing, Inc. Customer Service

43352 Business Park Dr.

Temecula, CA 92590 www.QuietCoolSystems.com

951-325-6340

1-888-QUIETCOOL 23

QuietCool is Proudly Designed and Built in California

Fan Serial Number Information

Retain for your records. Serial number is required for warranty purposes.

ADVANCED WHOLE HOUSE FANS

®

24